From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/chrome/wilco_ec/sysfs.c | 250 +++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 drivers/platform/chrome/wilco_ec/sysfs.c (limited to 'drivers/platform/chrome/wilco_ec/sysfs.c') diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c new file mode 100644 index 000000000..893c59dde --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/sysfs.c @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + * + * Sysfs properties to view and modify EC-controlled features on Wilco devices. + * The entries will appear under /sys/bus/platform/devices/GOOG000C:00/ + * + * See Documentation/ABI/testing/sysfs-platform-wilco-ec for more information. + */ + +#include +#include +#include +#include +#include +#include + +#define CMD_KB_CMOS 0x7C +#define SUB_CMD_KB_CMOS_AUTO_ON 0x03 + +struct boot_on_ac_request { + u8 cmd; /* Always CMD_KB_CMOS */ + u8 reserved1; + u8 sub_cmd; /* Always SUB_CMD_KB_CMOS_AUTO_ON */ + u8 reserved3to5[3]; + u8 val; /* Either 0 or 1 */ + u8 reserved7; +} __packed; + +#define CMD_USB_CHARGE 0x39 + +enum usb_charge_op { + USB_CHARGE_GET = 0, + USB_CHARGE_SET = 1, +}; + +struct usb_charge_request { + u8 cmd; /* Always CMD_USB_CHARGE */ + u8 reserved; + u8 op; /* One of enum usb_charge_op */ + u8 val; /* When setting, either 0 or 1 */ +} __packed; + +struct usb_charge_response { + u8 reserved; + u8 status; /* Set by EC to 0 on success, other value on failure */ + u8 val; /* When getting, set by EC to either 0 or 1 */ +} __packed; + +#define CMD_EC_INFO 0x38 +enum get_ec_info_op { + CMD_GET_EC_LABEL = 0, + CMD_GET_EC_REV = 1, + CMD_GET_EC_MODEL = 2, + CMD_GET_EC_BUILD_DATE = 3, +}; + +struct get_ec_info_req { + u8 cmd; /* Always CMD_EC_INFO */ + u8 reserved; + u8 op; /* One of enum get_ec_info_op */ +} __packed; + +struct get_ec_info_resp { + u8 reserved[2]; + char value[9]; /* __nonstring: might not be null terminated */ +} __packed; + +static ssize_t boot_on_ac_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct wilco_ec_device *ec = dev_get_drvdata(dev); + struct boot_on_ac_request rq; + struct wilco_ec_message msg; + int ret; + u8 val; + + ret = kstrtou8(buf, 10, &val); + if (ret < 0) + return ret; + if (val > 1) + return -EINVAL; + + memset(&rq, 0, sizeof(rq)); + rq.cmd = CMD_KB_CMOS; + rq.sub_cmd = SUB_CMD_KB_CMOS_AUTO_ON; + rq.val = val; + + memset(&msg, 0, sizeof(msg)); + msg.type = WILCO_EC_MSG_LEGACY; + msg.request_data = &rq; + msg.request_size = sizeof(rq); + ret = wilco_ec_mailbox(ec, &msg); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR_WO(boot_on_ac); + +static ssize_t get_info(struct device *dev, char *buf, enum get_ec_info_op op) +{ + struct wilco_ec_device *ec = dev_get_drvdata(dev); + struct get_ec_info_req req = { .cmd = CMD_EC_INFO, .op = op }; + struct get_ec_info_resp resp; + int ret; + + struct wilco_ec_message msg = { + .type = WILCO_EC_MSG_LEGACY, + .request_data = &req, + .request_size = sizeof(req), + .response_data = &resp, + .response_size = sizeof(resp), + }; + + ret = wilco_ec_mailbox(ec, &msg); + if (ret < 0) + return ret; + + return sysfs_emit(buf, "%.*s\n", (int)sizeof(resp.value), (char *)&resp.value); +} + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return get_info(dev, buf, CMD_GET_EC_LABEL); +} + +static DEVICE_ATTR_RO(version); + +static ssize_t build_revision_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return get_info(dev, buf, CMD_GET_EC_REV); +} + +static DEVICE_ATTR_RO(build_revision); + +static ssize_t build_date_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return get_info(dev, buf, CMD_GET_EC_BUILD_DATE); +} + +static DEVICE_ATTR_RO(build_date); + +static ssize_t model_number_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return get_info(dev, buf, CMD_GET_EC_MODEL); +} + +static DEVICE_ATTR_RO(model_number); + +static int send_usb_charge(struct wilco_ec_device *ec, + struct usb_charge_request *rq, + struct usb_charge_response *rs) +{ + struct wilco_ec_message msg; + int ret; + + memset(&msg, 0, sizeof(msg)); + msg.type = WILCO_EC_MSG_LEGACY; + msg.request_data = rq; + msg.request_size = sizeof(*rq); + msg.response_data = rs; + msg.response_size = sizeof(*rs); + ret = wilco_ec_mailbox(ec, &msg); + if (ret < 0) + return ret; + if (rs->status) + return -EIO; + + return 0; +} + +static ssize_t usb_charge_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wilco_ec_device *ec = dev_get_drvdata(dev); + struct usb_charge_request rq; + struct usb_charge_response rs; + int ret; + + memset(&rq, 0, sizeof(rq)); + rq.cmd = CMD_USB_CHARGE; + rq.op = USB_CHARGE_GET; + + ret = send_usb_charge(ec, &rq, &rs); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", rs.val); +} + +static ssize_t usb_charge_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct wilco_ec_device *ec = dev_get_drvdata(dev); + struct usb_charge_request rq; + struct usb_charge_response rs; + int ret; + u8 val; + + ret = kstrtou8(buf, 10, &val); + if (ret < 0) + return ret; + if (val > 1) + return -EINVAL; + + memset(&rq, 0, sizeof(rq)); + rq.cmd = CMD_USB_CHARGE; + rq.op = USB_CHARGE_SET; + rq.val = val; + + ret = send_usb_charge(ec, &rq, &rs); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR_RW(usb_charge); + +static struct attribute *wilco_dev_attrs[] = { + &dev_attr_boot_on_ac.attr, + &dev_attr_build_date.attr, + &dev_attr_build_revision.attr, + &dev_attr_model_number.attr, + &dev_attr_usb_charge.attr, + &dev_attr_version.attr, + NULL, +}; + +static const struct attribute_group wilco_dev_attr_group = { + .attrs = wilco_dev_attrs, +}; + +int wilco_ec_add_sysfs(struct wilco_ec_device *ec) +{ + return sysfs_create_group(&ec->dev->kobj, &wilco_dev_attr_group); +} + +void wilco_ec_remove_sysfs(struct wilco_ec_device *ec) +{ + sysfs_remove_group(&ec->dev->kobj, &wilco_dev_attr_group); +} -- cgit v1.2.3