From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/surface/aggregator/bus.c | 522 ++++++++++++++++++++++++++++++ 1 file changed, 522 insertions(+) create mode 100644 drivers/platform/surface/aggregator/bus.c (limited to 'drivers/platform/surface/aggregator/bus.c') diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c new file mode 100644 index 000000000..7004eb4a6 --- /dev/null +++ b/drivers/platform/surface/aggregator/bus.c @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Surface System Aggregator Module bus and device integration. + * + * Copyright (C) 2019-2022 Maximilian Luz + */ + +#include +#include +#include + +#include +#include + +#include "bus.h" +#include "controller.h" + + +/* -- Device and bus functions. --------------------------------------------- */ + +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ssam_device *sdev = to_ssam_device(dev); + + return sysfs_emit(buf, "ssam:d%02Xc%02Xt%02Xi%02Xf%02X\n", + sdev->uid.domain, sdev->uid.category, sdev->uid.target, + sdev->uid.instance, sdev->uid.function); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *ssam_device_attrs[] = { + &dev_attr_modalias.attr, + NULL, +}; +ATTRIBUTE_GROUPS(ssam_device); + +static int ssam_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct ssam_device *sdev = to_ssam_device(dev); + + return add_uevent_var(env, "MODALIAS=ssam:d%02Xc%02Xt%02Xi%02Xf%02X", + sdev->uid.domain, sdev->uid.category, + sdev->uid.target, sdev->uid.instance, + sdev->uid.function); +} + +static void ssam_device_release(struct device *dev) +{ + struct ssam_device *sdev = to_ssam_device(dev); + + ssam_controller_put(sdev->ctrl); + fwnode_handle_put(sdev->dev.fwnode); + kfree(sdev); +} + +const struct device_type ssam_device_type = { + .name = "surface_aggregator_device", + .groups = ssam_device_groups, + .uevent = ssam_device_uevent, + .release = ssam_device_release, +}; +EXPORT_SYMBOL_GPL(ssam_device_type); + +/** + * ssam_device_alloc() - Allocate and initialize a SSAM client device. + * @ctrl: The controller under which the device should be added. + * @uid: The UID of the device to be added. + * + * Allocates and initializes a new client device. The parent of the device + * will be set to the controller device and the name will be set based on the + * UID. Note that the device still has to be added via ssam_device_add(). + * Refer to that function for more details. + * + * Return: Returns the newly allocated and initialized SSAM client device, or + * %NULL if it could not be allocated. + */ +struct ssam_device *ssam_device_alloc(struct ssam_controller *ctrl, + struct ssam_device_uid uid) +{ + struct ssam_device *sdev; + + sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); + if (!sdev) + return NULL; + + device_initialize(&sdev->dev); + sdev->dev.bus = &ssam_bus_type; + sdev->dev.type = &ssam_device_type; + sdev->dev.parent = ssam_controller_device(ctrl); + sdev->ctrl = ssam_controller_get(ctrl); + sdev->uid = uid; + + dev_set_name(&sdev->dev, "%02x:%02x:%02x:%02x:%02x", + sdev->uid.domain, sdev->uid.category, sdev->uid.target, + sdev->uid.instance, sdev->uid.function); + + return sdev; +} +EXPORT_SYMBOL_GPL(ssam_device_alloc); + +/** + * ssam_device_add() - Add a SSAM client device. + * @sdev: The SSAM client device to be added. + * + * Added client devices must be guaranteed to always have a valid and active + * controller. Thus, this function will fail with %-ENODEV if the controller + * of the device has not been initialized yet, has been suspended, or has been + * shut down. + * + * The caller of this function should ensure that the corresponding call to + * ssam_device_remove() is issued before the controller is shut down. If the + * added device is a direct child of the controller device (default), it will + * be automatically removed when the controller is shut down. + * + * By default, the controller device will become the parent of the newly + * created client device. The parent may be changed before ssam_device_add is + * called, but care must be taken that a) the correct suspend/resume ordering + * is guaranteed and b) the client device does not outlive the controller, + * i.e. that the device is removed before the controller is being shut down. + * In case these guarantees have to be manually enforced, please refer to the + * ssam_client_link() and ssam_client_bind() functions, which are intended to + * set up device-links for this purpose. + * + * Return: Returns zero on success, a negative error code on failure. + */ +int ssam_device_add(struct ssam_device *sdev) +{ + int status; + + /* + * Ensure that we can only add new devices to a controller if it has + * been started and is not going away soon. This works in combination + * with ssam_controller_remove_clients to ensure driver presence for the + * controller device, i.e. it ensures that the controller (sdev->ctrl) + * is always valid and can be used for requests as long as the client + * device we add here is registered as child under it. This essentially + * guarantees that the client driver can always expect the preconditions + * for functions like ssam_request_do_sync() (controller has to be + * started and is not suspended) to hold and thus does not have to check + * for them. + * + * Note that for this to work, the controller has to be a parent device. + * If it is not a direct parent, care has to be taken that the device is + * removed via ssam_device_remove(), as device_unregister does not + * remove child devices recursively. + */ + ssam_controller_statelock(sdev->ctrl); + + if (sdev->ctrl->state != SSAM_CONTROLLER_STARTED) { + ssam_controller_stateunlock(sdev->ctrl); + return -ENODEV; + } + + status = device_add(&sdev->dev); + + ssam_controller_stateunlock(sdev->ctrl); + return status; +} +EXPORT_SYMBOL_GPL(ssam_device_add); + +/** + * ssam_device_remove() - Remove a SSAM client device. + * @sdev: The device to remove. + * + * Removes and unregisters the provided SSAM client device. + */ +void ssam_device_remove(struct ssam_device *sdev) +{ + device_unregister(&sdev->dev); +} +EXPORT_SYMBOL_GPL(ssam_device_remove); + +/** + * ssam_device_id_compatible() - Check if a device ID matches a UID. + * @id: The device ID as potential match. + * @uid: The device UID matching against. + * + * Check if the given ID is a match for the given UID, i.e. if a device with + * the provided UID is compatible to the given ID following the match rules + * described in its &ssam_device_id.match_flags member. + * + * Return: Returns %true if the given UID is compatible to the match rule + * described by the given ID, %false otherwise. + */ +static bool ssam_device_id_compatible(const struct ssam_device_id *id, + struct ssam_device_uid uid) +{ + if (id->domain != uid.domain || id->category != uid.category) + return false; + + if ((id->match_flags & SSAM_MATCH_TARGET) && id->target != uid.target) + return false; + + if ((id->match_flags & SSAM_MATCH_INSTANCE) && id->instance != uid.instance) + return false; + + if ((id->match_flags & SSAM_MATCH_FUNCTION) && id->function != uid.function) + return false; + + return true; +} + +/** + * ssam_device_id_is_null() - Check if a device ID is null. + * @id: The device ID to check. + * + * Check if a given device ID is null, i.e. all zeros. Used to check for the + * end of ``MODULE_DEVICE_TABLE(ssam, ...)`` or similar lists. + * + * Return: Returns %true if the given ID represents a null ID, %false + * otherwise. + */ +static bool ssam_device_id_is_null(const struct ssam_device_id *id) +{ + return id->match_flags == 0 && + id->domain == 0 && + id->category == 0 && + id->target == 0 && + id->instance == 0 && + id->function == 0 && + id->driver_data == 0; +} + +/** + * ssam_device_id_match() - Find the matching ID table entry for the given UID. + * @table: The table to search in. + * @uid: The UID to matched against the individual table entries. + * + * Find the first match for the provided device UID in the provided ID table + * and return it. Returns %NULL if no match could be found. + */ +const struct ssam_device_id *ssam_device_id_match(const struct ssam_device_id *table, + const struct ssam_device_uid uid) +{ + const struct ssam_device_id *id; + + for (id = table; !ssam_device_id_is_null(id); ++id) + if (ssam_device_id_compatible(id, uid)) + return id; + + return NULL; +} +EXPORT_SYMBOL_GPL(ssam_device_id_match); + +/** + * ssam_device_get_match() - Find and return the ID matching the device in the + * ID table of the bound driver. + * @dev: The device for which to get the matching ID table entry. + * + * Find the fist match for the UID of the device in the ID table of the + * currently bound driver and return it. Returns %NULL if the device does not + * have a driver bound to it, the driver does not have match_table (i.e. it is + * %NULL), or there is no match in the driver's match_table. + * + * This function essentially calls ssam_device_id_match() with the ID table of + * the bound device driver and the UID of the device. + * + * Return: Returns the first match for the UID of the device in the device + * driver's match table, or %NULL if no such match could be found. + */ +const struct ssam_device_id *ssam_device_get_match(const struct ssam_device *dev) +{ + const struct ssam_device_driver *sdrv; + + sdrv = to_ssam_device_driver(dev->dev.driver); + if (!sdrv) + return NULL; + + if (!sdrv->match_table) + return NULL; + + return ssam_device_id_match(sdrv->match_table, dev->uid); +} +EXPORT_SYMBOL_GPL(ssam_device_get_match); + +/** + * ssam_device_get_match_data() - Find the ID matching the device in the + * ID table of the bound driver and return its ``driver_data`` member. + * @dev: The device for which to get the match data. + * + * Find the fist match for the UID of the device in the ID table of the + * corresponding driver and return its driver_data. Returns %NULL if the + * device does not have a driver bound to it, the driver does not have + * match_table (i.e. it is %NULL), there is no match in the driver's + * match_table, or the match does not have any driver_data. + * + * This function essentially calls ssam_device_get_match() and, if any match + * could be found, returns its ``struct ssam_device_id.driver_data`` member. + * + * Return: Returns the driver data associated with the first match for the UID + * of the device in the device driver's match table, or %NULL if no such match + * could be found. + */ +const void *ssam_device_get_match_data(const struct ssam_device *dev) +{ + const struct ssam_device_id *id; + + id = ssam_device_get_match(dev); + if (!id) + return NULL; + + return (const void *)id->driver_data; +} +EXPORT_SYMBOL_GPL(ssam_device_get_match_data); + +static int ssam_bus_match(struct device *dev, struct device_driver *drv) +{ + struct ssam_device_driver *sdrv = to_ssam_device_driver(drv); + struct ssam_device *sdev = to_ssam_device(dev); + + if (!is_ssam_device(dev)) + return 0; + + return !!ssam_device_id_match(sdrv->match_table, sdev->uid); +} + +static int ssam_bus_probe(struct device *dev) +{ + return to_ssam_device_driver(dev->driver) + ->probe(to_ssam_device(dev)); +} + +static void ssam_bus_remove(struct device *dev) +{ + struct ssam_device_driver *sdrv = to_ssam_device_driver(dev->driver); + + if (sdrv->remove) + sdrv->remove(to_ssam_device(dev)); +} + +struct bus_type ssam_bus_type = { + .name = "surface_aggregator", + .match = ssam_bus_match, + .probe = ssam_bus_probe, + .remove = ssam_bus_remove, +}; +EXPORT_SYMBOL_GPL(ssam_bus_type); + +/** + * __ssam_device_driver_register() - Register a SSAM client device driver. + * @sdrv: The driver to register. + * @owner: The module owning the provided driver. + * + * Please refer to the ssam_device_driver_register() macro for the normal way + * to register a driver from inside its owning module. + */ +int __ssam_device_driver_register(struct ssam_device_driver *sdrv, + struct module *owner) +{ + sdrv->driver.owner = owner; + sdrv->driver.bus = &ssam_bus_type; + + /* force drivers to async probe so I/O is possible in probe */ + sdrv->driver.probe_type = PROBE_PREFER_ASYNCHRONOUS; + + return driver_register(&sdrv->driver); +} +EXPORT_SYMBOL_GPL(__ssam_device_driver_register); + +/** + * ssam_device_driver_unregister - Unregister a SSAM device driver. + * @sdrv: The driver to unregister. + */ +void ssam_device_driver_unregister(struct ssam_device_driver *sdrv) +{ + driver_unregister(&sdrv->driver); +} +EXPORT_SYMBOL_GPL(ssam_device_driver_unregister); + + +/* -- Bus registration. ----------------------------------------------------- */ + +/** + * ssam_bus_register() - Register and set-up the SSAM client device bus. + */ +int ssam_bus_register(void) +{ + return bus_register(&ssam_bus_type); +} + +/** + * ssam_bus_unregister() - Unregister the SSAM client device bus. + */ +void ssam_bus_unregister(void) +{ + return bus_unregister(&ssam_bus_type); +} + + +/* -- Helpers for controller and hub devices. ------------------------------- */ + +static int ssam_device_uid_from_string(const char *str, struct ssam_device_uid *uid) +{ + u8 d, tc, tid, iid, fn; + int n; + + n = sscanf(str, "%hhx:%hhx:%hhx:%hhx:%hhx", &d, &tc, &tid, &iid, &fn); + if (n != 5) + return -EINVAL; + + uid->domain = d; + uid->category = tc; + uid->target = tid; + uid->instance = iid; + uid->function = fn; + + return 0; +} + +static int ssam_get_uid_for_node(struct fwnode_handle *node, struct ssam_device_uid *uid) +{ + const char *str = fwnode_get_name(node); + + /* + * To simplify definitions of firmware nodes, we set the device name + * based on the UID of the device, prefixed with "ssam:". + */ + if (strncmp(str, "ssam:", strlen("ssam:")) != 0) + return -ENODEV; + + str += strlen("ssam:"); + return ssam_device_uid_from_string(str, uid); +} + +static int ssam_add_client_device(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node) +{ + struct ssam_device_uid uid; + struct ssam_device *sdev; + int status; + + status = ssam_get_uid_for_node(node, &uid); + if (status) + return status; + + sdev = ssam_device_alloc(ctrl, uid); + if (!sdev) + return -ENOMEM; + + sdev->dev.parent = parent; + sdev->dev.fwnode = fwnode_handle_get(node); + + status = ssam_device_add(sdev); + if (status) + ssam_device_put(sdev); + + return status; +} + +/** + * __ssam_register_clients() - Register client devices defined under the + * given firmware node as children of the given device. + * @parent: The parent device under which clients should be registered. + * @ctrl: The controller with which client should be registered. + * @node: The firmware node holding definitions of the devices to be added. + * + * Register all clients that have been defined as children of the given root + * firmware node as children of the given parent device. The respective child + * firmware nodes will be associated with the correspondingly created child + * devices. + * + * The given controller will be used to instantiate the new devices. See + * ssam_device_add() for details. + * + * Note that, generally, the use of either ssam_device_register_clients() or + * ssam_register_clients() should be preferred as they directly use the + * firmware node and/or controller associated with the given device. This + * function is only intended for use when different device specifications (e.g. + * ACPI and firmware nodes) need to be combined (as is done in the platform hub + * of the device registry). + * + * Return: Returns zero on success, nonzero on failure. + */ +int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node) +{ + struct fwnode_handle *child; + int status; + + fwnode_for_each_child_node(node, child) { + /* + * Try to add the device specified in the firmware node. If + * this fails with -ENODEV, the node does not specify any SSAM + * device, so ignore it and continue with the next one. + */ + status = ssam_add_client_device(parent, ctrl, child); + if (status && status != -ENODEV) + goto err; + } + + return 0; +err: + ssam_remove_clients(parent); + return status; +} +EXPORT_SYMBOL_GPL(__ssam_register_clients); + +static int ssam_remove_device(struct device *dev, void *_data) +{ + struct ssam_device *sdev = to_ssam_device(dev); + + if (is_ssam_device(dev)) + ssam_device_remove(sdev); + + return 0; +} + +/** + * ssam_remove_clients() - Remove SSAM client devices registered as direct + * children under the given parent device. + * @dev: The (parent) device to remove all direct clients for. + * + * Remove all SSAM client devices registered as direct children under the given + * device. Note that this only accounts for direct children of the device. + * Refer to ssam_device_add()/ssam_device_remove() for more details. + */ +void ssam_remove_clients(struct device *dev) +{ + device_for_each_child_reverse(dev, NULL, ssam_remove_device); +} +EXPORT_SYMBOL_GPL(ssam_remove_clients); -- cgit v1.2.3