From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/surface/aggregator/ssh_parser.c | 228 +++++++++++++++++++++++ 1 file changed, 228 insertions(+) create mode 100644 drivers/platform/surface/aggregator/ssh_parser.c (limited to 'drivers/platform/surface/aggregator/ssh_parser.c') diff --git a/drivers/platform/surface/aggregator/ssh_parser.c b/drivers/platform/surface/aggregator/ssh_parser.c new file mode 100644 index 000000000..a6f668694 --- /dev/null +++ b/drivers/platform/surface/aggregator/ssh_parser.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * SSH message parser. + * + * Copyright (C) 2019-2022 Maximilian Luz + */ + +#include +#include +#include +#include + +#include +#include "ssh_parser.h" + +/** + * sshp_validate_crc() - Validate a CRC in raw message data. + * @src: The span of data over which the CRC should be computed. + * @crc: The pointer to the expected u16 CRC value. + * + * Computes the CRC of the provided data span (@src), compares it to the CRC + * stored at the given address (@crc), and returns the result of this + * comparison, i.e. %true if equal. This function is intended to run on raw + * input/message data. + * + * Return: Returns %true if the computed CRC matches the stored CRC, %false + * otherwise. + */ +static bool sshp_validate_crc(const struct ssam_span *src, const u8 *crc) +{ + u16 actual = ssh_crc(src->ptr, src->len); + u16 expected = get_unaligned_le16(crc); + + return actual == expected; +} + +/** + * sshp_starts_with_syn() - Check if the given data starts with SSH SYN bytes. + * @src: The data span to check the start of. + */ +static bool sshp_starts_with_syn(const struct ssam_span *src) +{ + return src->len >= 2 && get_unaligned_le16(src->ptr) == SSH_MSG_SYN; +} + +/** + * sshp_find_syn() - Find SSH SYN bytes in the given data span. + * @src: The data span to search in. + * @rem: The span (output) indicating the remaining data, starting with SSH + * SYN bytes, if found. + * + * Search for SSH SYN bytes in the given source span. If found, set the @rem + * span to the remaining data, starting with the first SYN bytes and capped by + * the source span length, and return %true. This function does not copy any + * data, but rather only sets pointers to the respective start addresses and + * length values. + * + * If no SSH SYN bytes could be found, set the @rem span to the zero-length + * span at the end of the source span and return %false. + * + * If partial SSH SYN bytes could be found at the end of the source span, set + * the @rem span to cover these partial SYN bytes, capped by the end of the + * source span, and return %false. This function should then be re-run once + * more data is available. + * + * Return: Returns %true if a complete SSH SYN sequence could be found, + * %false otherwise. + */ +bool sshp_find_syn(const struct ssam_span *src, struct ssam_span *rem) +{ + size_t i; + + for (i = 0; i < src->len - 1; i++) { + if (likely(get_unaligned_le16(src->ptr + i) == SSH_MSG_SYN)) { + rem->ptr = src->ptr + i; + rem->len = src->len - i; + return true; + } + } + + if (unlikely(src->ptr[src->len - 1] == (SSH_MSG_SYN & 0xff))) { + rem->ptr = src->ptr + src->len - 1; + rem->len = 1; + return false; + } + + rem->ptr = src->ptr + src->len; + rem->len = 0; + return false; +} + +/** + * sshp_parse_frame() - Parse SSH frame. + * @dev: The device used for logging. + * @source: The source to parse from. + * @frame: The parsed frame (output). + * @payload: The parsed payload (output). + * @maxlen: The maximum supported message length. + * + * Parses and validates a SSH frame, including its payload, from the given + * source. Sets the provided @frame pointer to the start of the frame and + * writes the limits of the frame payload to the provided @payload span + * pointer. + * + * This function does not copy any data, but rather only validates the message + * data and sets pointers (and length values) to indicate the respective parts. + * + * If no complete SSH frame could be found, the frame pointer will be set to + * the %NULL pointer and the payload span will be set to the null span (start + * pointer %NULL, size zero). + * + * Return: Returns zero on success or if the frame is incomplete, %-ENOMSG if + * the start of the message is invalid, %-EBADMSG if any (frame-header or + * payload) CRC is invalid, or %-EMSGSIZE if the SSH message is bigger than + * the maximum message length specified in the @maxlen parameter. + */ +int sshp_parse_frame(const struct device *dev, const struct ssam_span *source, + struct ssh_frame **frame, struct ssam_span *payload, + size_t maxlen) +{ + struct ssam_span sf; + struct ssam_span sp; + + /* Initialize output. */ + *frame = NULL; + payload->ptr = NULL; + payload->len = 0; + + if (!sshp_starts_with_syn(source)) { + dev_warn(dev, "rx: parser: invalid start of frame\n"); + return -ENOMSG; + } + + /* Check for minimum packet length. */ + if (unlikely(source->len < SSH_MESSAGE_LENGTH(0))) { + dev_dbg(dev, "rx: parser: not enough data for frame\n"); + return 0; + } + + /* Pin down frame. */ + sf.ptr = source->ptr + sizeof(u16); + sf.len = sizeof(struct ssh_frame); + + /* Validate frame CRC. */ + if (unlikely(!sshp_validate_crc(&sf, sf.ptr + sf.len))) { + dev_warn(dev, "rx: parser: invalid frame CRC\n"); + return -EBADMSG; + } + + /* Ensure packet does not exceed maximum length. */ + sp.len = get_unaligned_le16(&((struct ssh_frame *)sf.ptr)->len); + if (unlikely(SSH_MESSAGE_LENGTH(sp.len) > maxlen)) { + dev_warn(dev, "rx: parser: frame too large: %llu bytes\n", + SSH_MESSAGE_LENGTH(sp.len)); + return -EMSGSIZE; + } + + /* Pin down payload. */ + sp.ptr = sf.ptr + sf.len + sizeof(u16); + + /* Check for frame + payload length. */ + if (source->len < SSH_MESSAGE_LENGTH(sp.len)) { + dev_dbg(dev, "rx: parser: not enough data for payload\n"); + return 0; + } + + /* Validate payload CRC. */ + if (unlikely(!sshp_validate_crc(&sp, sp.ptr + sp.len))) { + dev_warn(dev, "rx: parser: invalid payload CRC\n"); + return -EBADMSG; + } + + *frame = (struct ssh_frame *)sf.ptr; + *payload = sp; + + dev_dbg(dev, "rx: parser: valid frame found (type: %#04x, len: %u)\n", + (*frame)->type, (*frame)->len); + + return 0; +} + +/** + * sshp_parse_command() - Parse SSH command frame payload. + * @dev: The device used for logging. + * @source: The source to parse from. + * @command: The parsed command (output). + * @command_data: The parsed command data/payload (output). + * + * Parses and validates a SSH command frame payload. Sets the @command pointer + * to the command header and the @command_data span to the command data (i.e. + * payload of the command). This will result in a zero-length span if the + * command does not have any associated data/payload. This function does not + * check the frame-payload-type field, which should be checked by the caller + * before calling this function. + * + * The @source parameter should be the complete frame payload, e.g. returned + * by the sshp_parse_frame() command. + * + * This function does not copy any data, but rather only validates the frame + * payload data and sets pointers (and length values) to indicate the + * respective parts. + * + * Return: Returns zero on success or %-ENOMSG if @source does not represent a + * valid command-type frame payload, i.e. is too short. + */ +int sshp_parse_command(const struct device *dev, const struct ssam_span *source, + struct ssh_command **command, + struct ssam_span *command_data) +{ + /* Check for minimum length. */ + if (unlikely(source->len < sizeof(struct ssh_command))) { + *command = NULL; + command_data->ptr = NULL; + command_data->len = 0; + + dev_err(dev, "rx: parser: command payload is too short\n"); + return -ENOMSG; + } + + *command = (struct ssh_command *)source->ptr; + command_data->ptr = source->ptr + sizeof(struct ssh_command); + command_data->len = source->len - sizeof(struct ssh_command); + + dev_dbg(dev, "rx: parser: valid command found (tc: %#04x, cid: %#04x)\n", + (*command)->tc, (*command)->cid); + + return 0; +} -- cgit v1.2.3