From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/surface/surface3-wmi.c | 287 ++++++++++++++++++++++++++++++++ 1 file changed, 287 insertions(+) create mode 100644 drivers/platform/surface/surface3-wmi.c (limited to 'drivers/platform/surface/surface3-wmi.c') diff --git a/drivers/platform/surface/surface3-wmi.c b/drivers/platform/surface/surface3-wmi.c new file mode 100644 index 000000000..ca4602bcc --- /dev/null +++ b/drivers/platform/surface/surface3-wmi.c @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for the LID cover switch of the Surface 3 + * + * Copyright (c) 2016 Red Hat Inc. + */ + + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Benjamin Tissoires "); +MODULE_DESCRIPTION("Surface 3 platform driver"); +MODULE_LICENSE("GPL"); + +#define ACPI_BUTTON_HID_LID "PNP0C0D" +#define SPI_CTL_OBJ_NAME "SPI" +#define SPI_TS_OBJ_NAME "NTRG" + +#define SURFACE3_LID_GUID "F7CC25EC-D20B-404C-8903-0ED4359C18AE" + +MODULE_ALIAS("wmi:" SURFACE3_LID_GUID); + +static const struct dmi_system_id surface3_dmi_table[] = { +#if defined(CONFIG_X86) + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), + }, + }, +#endif + { } +}; + +struct surface3_wmi { + struct acpi_device *touchscreen_adev; + struct acpi_device *pnp0c0d_adev; + struct acpi_hotplug_context hp; + struct input_dev *input; +}; + +static struct platform_device *s3_wmi_pdev; + +static struct surface3_wmi s3_wmi; + +static DEFINE_MUTEX(s3_wmi_lock); + +static int s3_wmi_query_block(const char *guid, int instance, int *ret) +{ + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj = NULL; + acpi_status status; + int error = 0; + + mutex_lock(&s3_wmi_lock); + status = wmi_query_block(guid, instance, &output); + if (ACPI_FAILURE(status)) { + error = -EIO; + goto out_free_unlock; + } + + obj = output.pointer; + + if (!obj || obj->type != ACPI_TYPE_INTEGER) { + if (obj) { + pr_err("query block returned object type: %d - buffer length:%d\n", + obj->type, + obj->type == ACPI_TYPE_BUFFER ? + obj->buffer.length : 0); + } + error = -EINVAL; + goto out_free_unlock; + } + *ret = obj->integer.value; + out_free_unlock: + kfree(obj); + mutex_unlock(&s3_wmi_lock); + return error; +} + +static inline int s3_wmi_query_lid(int *ret) +{ + return s3_wmi_query_block(SURFACE3_LID_GUID, 0, ret); +} + +static int s3_wmi_send_lid_state(void) +{ + int ret, lid_sw; + + ret = s3_wmi_query_lid(&lid_sw); + if (ret) + return ret; + + input_report_switch(s3_wmi.input, SW_LID, lid_sw); + input_sync(s3_wmi.input); + + return 0; +} + +static int s3_wmi_hp_notify(struct acpi_device *adev, u32 value) +{ + return s3_wmi_send_lid_state(); +} + +static acpi_status s3_wmi_attach_spi_device(acpi_handle handle, + u32 level, + void *data, + void **return_value) +{ + struct acpi_device *adev = acpi_fetch_acpi_dev(handle); + struct acpi_device **ts_adev = data; + + if (!adev || strncmp(acpi_device_bid(adev), SPI_TS_OBJ_NAME, + strlen(SPI_TS_OBJ_NAME))) + return AE_OK; + + if (*ts_adev) { + pr_err("duplicate entry %s\n", SPI_TS_OBJ_NAME); + return AE_OK; + } + + *ts_adev = adev; + + return AE_OK; +} + +static int s3_wmi_check_platform_device(struct device *dev, void *data) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + struct acpi_device *ts_adev = NULL; + acpi_status status; + + /* ignore non ACPI devices */ + if (!adev) + return 0; + + /* check for LID ACPI switch */ + if (!strcmp(ACPI_BUTTON_HID_LID, acpi_device_hid(adev))) { + s3_wmi.pnp0c0d_adev = adev; + return 0; + } + + /* ignore non SPI controllers */ + if (strncmp(acpi_device_bid(adev), SPI_CTL_OBJ_NAME, + strlen(SPI_CTL_OBJ_NAME))) + return 0; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, adev->handle, 1, + s3_wmi_attach_spi_device, NULL, + &ts_adev, NULL); + if (ACPI_FAILURE(status)) + dev_warn(dev, "failed to enumerate SPI slaves\n"); + + if (!ts_adev) + return 0; + + s3_wmi.touchscreen_adev = ts_adev; + + return 0; +} + +static int s3_wmi_create_and_register_input(struct platform_device *pdev) +{ + struct input_dev *input; + int error; + + input = devm_input_allocate_device(&pdev->dev); + if (!input) + return -ENOMEM; + + input->name = "Lid Switch"; + input->phys = "button/input0"; + input->id.bustype = BUS_HOST; + input->id.product = 0x0005; + + input_set_capability(input, EV_SW, SW_LID); + + error = input_register_device(input); + if (error) + return error; + + s3_wmi.input = input; + + return 0; +} + +static int __init s3_wmi_probe(struct platform_device *pdev) +{ + int error; + + if (!dmi_check_system(surface3_dmi_table)) + return -ENODEV; + + memset(&s3_wmi, 0, sizeof(s3_wmi)); + + bus_for_each_dev(&platform_bus_type, NULL, NULL, + s3_wmi_check_platform_device); + + if (!s3_wmi.touchscreen_adev) + return -ENODEV; + + acpi_bus_trim(s3_wmi.pnp0c0d_adev); + + error = s3_wmi_create_and_register_input(pdev); + if (error) + goto restore_acpi_lid; + + acpi_initialize_hp_context(s3_wmi.touchscreen_adev, &s3_wmi.hp, + s3_wmi_hp_notify, NULL); + + s3_wmi_send_lid_state(); + + return 0; + + restore_acpi_lid: + acpi_bus_scan(s3_wmi.pnp0c0d_adev->handle); + return error; +} + +static int s3_wmi_remove(struct platform_device *device) +{ + /* remove the hotplug context from the acpi device */ + s3_wmi.touchscreen_adev->hp = NULL; + + /* reinstall the actual PNPC0C0D LID default handle */ + acpi_bus_scan(s3_wmi.pnp0c0d_adev->handle); + return 0; +} + +static int __maybe_unused s3_wmi_resume(struct device *dev) +{ + s3_wmi_send_lid_state(); + return 0; +} +static SIMPLE_DEV_PM_OPS(s3_wmi_pm, NULL, s3_wmi_resume); + +static struct platform_driver s3_wmi_driver = { + .driver = { + .name = "surface3-wmi", + .pm = &s3_wmi_pm, + }, + .remove = s3_wmi_remove, +}; + +static int __init s3_wmi_init(void) +{ + int error; + + s3_wmi_pdev = platform_device_alloc("surface3-wmi", -1); + if (!s3_wmi_pdev) + return -ENOMEM; + + error = platform_device_add(s3_wmi_pdev); + if (error) + goto err_device_put; + + error = platform_driver_probe(&s3_wmi_driver, s3_wmi_probe); + if (error) + goto err_device_del; + + pr_info("Surface 3 WMI Extras loaded\n"); + return 0; + + err_device_del: + platform_device_del(s3_wmi_pdev); + err_device_put: + platform_device_put(s3_wmi_pdev); + return error; +} + +static void __exit s3_wmi_exit(void) +{ + platform_device_unregister(s3_wmi_pdev); + platform_driver_unregister(&s3_wmi_driver); +} + +module_init(s3_wmi_init); +module_exit(s3_wmi_exit); -- cgit v1.2.3