From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/surface/surface_aggregator_hub.c | 371 ++++++++++++++++++++++ 1 file changed, 371 insertions(+) create mode 100644 drivers/platform/surface/surface_aggregator_hub.c (limited to 'drivers/platform/surface/surface_aggregator_hub.c') diff --git a/drivers/platform/surface/surface_aggregator_hub.c b/drivers/platform/surface/surface_aggregator_hub.c new file mode 100644 index 000000000..8b8b80228 --- /dev/null +++ b/drivers/platform/surface/surface_aggregator_hub.c @@ -0,0 +1,371 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Surface System Aggregator Module (SSAM) subsystem device hubs. + * + * Provides a driver for SSAM subsystems device hubs. This driver performs + * instantiation of the devices managed by said hubs and takes care of + * (hot-)removal. + * + * Copyright (C) 2020-2022 Maximilian Luz + */ + +#include +#include +#include +#include +#include + +#include + + +/* -- SSAM generic subsystem hub driver framework. -------------------------- */ + +enum ssam_hub_state { + SSAM_HUB_UNINITIALIZED, /* Only set during initialization. */ + SSAM_HUB_CONNECTED, + SSAM_HUB_DISCONNECTED, +}; + +enum ssam_hub_flags { + SSAM_HUB_HOT_REMOVED, +}; + +struct ssam_hub; + +struct ssam_hub_ops { + int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state); +}; + +struct ssam_hub { + struct ssam_device *sdev; + + enum ssam_hub_state state; + unsigned long flags; + + struct delayed_work update_work; + unsigned long connect_delay; + + struct ssam_event_notifier notif; + struct ssam_hub_ops ops; +}; + +struct ssam_hub_desc { + struct { + struct ssam_event_registry reg; + struct ssam_event_id id; + enum ssam_event_mask mask; + } event; + + struct { + u32 (*notify)(struct ssam_event_notifier *nf, const struct ssam_event *event); + int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state); + } ops; + + unsigned long connect_delay_ms; +}; + +static void ssam_hub_update_workfn(struct work_struct *work) +{ + struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work); + enum ssam_hub_state state; + int status = 0; + + status = hub->ops.get_state(hub, &state); + if (status) + return; + + /* + * There is a small possibility that hub devices were hot-removed and + * re-added before we were able to remove them here. In that case, both + * the state returned by get_state() and the state of the hub will + * equal SSAM_HUB_CONNECTED and we would bail early below, which would + * leave child devices without proper (re-)initialization and the + * hot-remove flag set. + * + * Therefore, we check whether devices have been hot-removed via an + * additional flag on the hub and, in this case, override the returned + * hub state. In case of a missed disconnect (i.e. get_state returned + * "connected"), we further need to re-schedule this work (with the + * appropriate delay) as the actual connect work submission might have + * been merged with this one. + * + * This then leads to one of two cases: Either we submit an unnecessary + * work item (which will get ignored via either the queue or the state + * checks) or, in the unlikely case that the work is actually required, + * double the normal connect delay. + */ + if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) { + if (state == SSAM_HUB_CONNECTED) + schedule_delayed_work(&hub->update_work, hub->connect_delay); + + state = SSAM_HUB_DISCONNECTED; + } + + if (hub->state == state) + return; + hub->state = state; + + if (hub->state == SSAM_HUB_CONNECTED) + status = ssam_device_register_clients(hub->sdev); + else + ssam_remove_clients(&hub->sdev->dev); + + if (status) + dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status); +} + +static int ssam_hub_mark_hot_removed(struct device *dev, void *_data) +{ + struct ssam_device *sdev = to_ssam_device(dev); + + if (is_ssam_device(dev)) + ssam_device_mark_hot_removed(sdev); + + return 0; +} + +static void ssam_hub_update(struct ssam_hub *hub, bool connected) +{ + unsigned long delay; + + /* Mark devices as hot-removed before we remove any. */ + if (!connected) { + set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags); + device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed); + } + + /* + * Delay update when the base/keyboard cover is being connected to give + * devices/EC some time to set up. + */ + delay = connected ? hub->connect_delay : 0; + + schedule_delayed_work(&hub->update_work, delay); +} + +static int __maybe_unused ssam_hub_resume(struct device *dev) +{ + struct ssam_hub *hub = dev_get_drvdata(dev); + + schedule_delayed_work(&hub->update_work, 0); + return 0; +} +static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume); + +static int ssam_hub_probe(struct ssam_device *sdev) +{ + const struct ssam_hub_desc *desc; + struct ssam_hub *hub; + int status; + + desc = ssam_device_get_match_data(sdev); + if (!desc) { + WARN(1, "no driver match data specified"); + return -EINVAL; + } + + hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL); + if (!hub) + return -ENOMEM; + + hub->sdev = sdev; + hub->state = SSAM_HUB_UNINITIALIZED; + + hub->notif.base.priority = INT_MAX; /* This notifier should run first. */ + hub->notif.base.fn = desc->ops.notify; + hub->notif.event.reg = desc->event.reg; + hub->notif.event.id = desc->event.id; + hub->notif.event.mask = desc->event.mask; + hub->notif.event.flags = SSAM_EVENT_SEQUENCED; + + hub->connect_delay = msecs_to_jiffies(desc->connect_delay_ms); + hub->ops.get_state = desc->ops.get_state; + + INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn); + + ssam_device_set_drvdata(sdev, hub); + + status = ssam_device_notifier_register(sdev, &hub->notif); + if (status) + return status; + + schedule_delayed_work(&hub->update_work, 0); + return 0; +} + +static void ssam_hub_remove(struct ssam_device *sdev) +{ + struct ssam_hub *hub = ssam_device_get_drvdata(sdev); + + ssam_device_notifier_unregister(sdev, &hub->notif); + cancel_delayed_work_sync(&hub->update_work); + ssam_remove_clients(&sdev->dev); +} + + +/* -- SSAM base-subsystem hub driver. --------------------------------------- */ + +/* + * Some devices (especially battery) may need a bit of time to be fully usable + * after being (re-)connected. This delay has been determined via + * experimentation. + */ +#define SSAM_BASE_UPDATE_CONNECT_DELAY 2500 + +SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, { + .target_category = SSAM_SSH_TC_BAS, + .target_id = SSAM_SSH_TID_SAM, + .command_id = 0x0d, + .instance_id = 0x00, +}); + +#define SSAM_BAS_OPMODE_TABLET 0x00 +#define SSAM_EVENT_BAS_CID_CONNECTION 0x0c + +static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state) +{ + u8 opmode; + int status; + + status = ssam_retry(ssam_bas_query_opmode, hub->sdev->ctrl, &opmode); + if (status < 0) { + dev_err(&hub->sdev->dev, "failed to query base state: %d\n", status); + return status; + } + + if (opmode != SSAM_BAS_OPMODE_TABLET) + *state = SSAM_HUB_CONNECTED; + else + *state = SSAM_HUB_DISCONNECTED; + + return 0; +} + +static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) +{ + struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif); + + if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION) + return 0; + + if (event->length < 1) { + dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length); + return 0; + } + + ssam_hub_update(hub, event->data[0]); + + /* + * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and + * consumed by the detachment system driver. We're just a (more or less) + * silent observer. + */ + return 0; +} + +static const struct ssam_hub_desc base_hub = { + .event = { + .reg = SSAM_EVENT_REGISTRY_SAM, + .id = { + .target_category = SSAM_SSH_TC_BAS, + .instance = 0, + }, + .mask = SSAM_EVENT_MASK_NONE, + }, + .ops = { + .notify = ssam_base_hub_notif, + .get_state = ssam_base_hub_query_state, + }, + .connect_delay_ms = SSAM_BASE_UPDATE_CONNECT_DELAY, +}; + + +/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */ + +/* + * Some devices may need a bit of time to be fully usable after being + * (re-)connected. This delay has been determined via experimentation. + */ +#define SSAM_KIP_UPDATE_CONNECT_DELAY 250 + +#define SSAM_EVENT_KIP_CID_CONNECTION 0x2c + +SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_query_state, u8, { + .target_category = SSAM_SSH_TC_KIP, + .target_id = SSAM_SSH_TID_SAM, + .command_id = 0x2c, + .instance_id = 0x00, +}); + +static int ssam_kip_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state) +{ + int status; + u8 connected; + + status = ssam_retry(__ssam_kip_query_state, hub->sdev->ctrl, &connected); + if (status < 0) { + dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status); + return status; + } + + *state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED; + return 0; +} + +static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) +{ + struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif); + + if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION) + return 0; /* Return "unhandled". */ + + if (event->length < 1) { + dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length); + return 0; + } + + ssam_hub_update(hub, event->data[0]); + return SSAM_NOTIF_HANDLED; +} + +static const struct ssam_hub_desc kip_hub = { + .event = { + .reg = SSAM_EVENT_REGISTRY_SAM, + .id = { + .target_category = SSAM_SSH_TC_KIP, + .instance = 0, + }, + .mask = SSAM_EVENT_MASK_TARGET, + }, + .ops = { + .notify = ssam_kip_hub_notif, + .get_state = ssam_kip_hub_query_state, + }, + .connect_delay_ms = SSAM_KIP_UPDATE_CONNECT_DELAY, +}; + + +/* -- Driver registration. -------------------------------------------------- */ + +static const struct ssam_device_id ssam_hub_match[] = { + { SSAM_VDEV(HUB, SAM, SSAM_SSH_TC_KIP, 0x00), (unsigned long)&kip_hub }, + { SSAM_VDEV(HUB, SAM, SSAM_SSH_TC_BAS, 0x00), (unsigned long)&base_hub }, + { } +}; +MODULE_DEVICE_TABLE(ssam, ssam_hub_match); + +static struct ssam_device_driver ssam_subsystem_hub_driver = { + .probe = ssam_hub_probe, + .remove = ssam_hub_remove, + .match_table = ssam_hub_match, + .driver = { + .name = "surface_aggregator_subsystem_hub", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .pm = &ssam_hub_pm_ops, + }, +}; +module_ssam_device_driver(ssam_subsystem_hub_driver); + +MODULE_AUTHOR("Maximilian Luz "); +MODULE_DESCRIPTION("Subsystem device hub driver for Surface System Aggregator Module"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3