From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/surface/surface_gpe.c | 354 +++++++++++++++++++++++++++++++++ 1 file changed, 354 insertions(+) create mode 100644 drivers/platform/surface/surface_gpe.c (limited to 'drivers/platform/surface/surface_gpe.c') diff --git a/drivers/platform/surface/surface_gpe.c b/drivers/platform/surface/surface_gpe.c new file mode 100644 index 000000000..c219b840d --- /dev/null +++ b/drivers/platform/surface/surface_gpe.c @@ -0,0 +1,354 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Surface GPE/Lid driver to enable wakeup from suspend via the lid by + * properly configuring the respective GPEs. Required for wakeup via lid on + * newer Intel-based Microsoft Surface devices. + * + * Copyright (C) 2020-2022 Maximilian Luz + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include + +/* + * Note: The GPE numbers for the lid devices found below have been obtained + * from ACPI/the DSDT table, specifically from the GPE handler for the + * lid. + */ + +static const struct property_entry lid_device_props_l17[] = { + PROPERTY_ENTRY_U32("gpe", 0x17), + {}, +}; + +static const struct property_entry lid_device_props_l4B[] = { + PROPERTY_ENTRY_U32("gpe", 0x4B), + {}, +}; + +static const struct property_entry lid_device_props_l4D[] = { + PROPERTY_ENTRY_U32("gpe", 0x4D), + {}, +}; + +static const struct property_entry lid_device_props_l4F[] = { + PROPERTY_ENTRY_U32("gpe", 0x4F), + {}, +}; + +static const struct property_entry lid_device_props_l57[] = { + PROPERTY_ENTRY_U32("gpe", 0x57), + {}, +}; + +/* + * Note: When changing this, don't forget to check that the MODULE_ALIAS below + * still fits. + */ +static const struct dmi_system_id dmi_lid_device_table[] = { + { + .ident = "Surface Pro 4", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"), + }, + .driver_data = (void *)lid_device_props_l17, + }, + { + .ident = "Surface Pro 5", + .matches = { + /* + * We match for SKU here due to generic product name + * "Surface Pro". + */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"), + }, + .driver_data = (void *)lid_device_props_l4F, + }, + { + .ident = "Surface Pro 5 (LTE)", + .matches = { + /* + * We match for SKU here due to generic product name + * "Surface Pro" + */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"), + }, + .driver_data = (void *)lid_device_props_l4F, + }, + { + .ident = "Surface Pro 6", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"), + }, + .driver_data = (void *)lid_device_props_l4F, + }, + { + .ident = "Surface Pro 7", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 7"), + }, + .driver_data = (void *)lid_device_props_l4D, + }, + { + .ident = "Surface Pro 8", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 8"), + }, + .driver_data = (void *)lid_device_props_l4B, + }, + { + .ident = "Surface Book 1", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"), + }, + .driver_data = (void *)lid_device_props_l17, + }, + { + .ident = "Surface Book 2", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"), + }, + .driver_data = (void *)lid_device_props_l17, + }, + { + .ident = "Surface Book 3", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 3"), + }, + .driver_data = (void *)lid_device_props_l4D, + }, + { + .ident = "Surface Laptop 1", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"), + }, + .driver_data = (void *)lid_device_props_l57, + }, + { + .ident = "Surface Laptop 2", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"), + }, + .driver_data = (void *)lid_device_props_l57, + }, + { + .ident = "Surface Laptop 3 (Intel 13\")", + .matches = { + /* + * We match for SKU here due to different variants: The + * AMD (15") version does not rely on GPEs. + */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_3_1867:1868"), + }, + .driver_data = (void *)lid_device_props_l4D, + }, + { + .ident = "Surface Laptop 3 (Intel 15\")", + .matches = { + /* + * We match for SKU here due to different variants: The + * AMD (15") version does not rely on GPEs. + */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_3_1872"), + }, + .driver_data = (void *)lid_device_props_l4D, + }, + { + .ident = "Surface Laptop 4 (Intel 13\")", + .matches = { + /* + * We match for SKU here due to different variants: The + * AMD (15") version does not rely on GPEs. + */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_4_1950:1951"), + }, + .driver_data = (void *)lid_device_props_l4B, + }, + { + .ident = "Surface Laptop Studio", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop Studio"), + }, + .driver_data = (void *)lid_device_props_l4B, + }, + { } +}; + +struct surface_lid_device { + u32 gpe_number; +}; + +static int surface_lid_enable_wakeup(struct device *dev, bool enable) +{ + const struct surface_lid_device *lid = dev_get_drvdata(dev); + int action = enable ? ACPI_GPE_ENABLE : ACPI_GPE_DISABLE; + acpi_status status; + + status = acpi_set_gpe_wake_mask(NULL, lid->gpe_number, action); + if (ACPI_FAILURE(status)) { + dev_err(dev, "failed to set GPE wake mask: %s\n", + acpi_format_exception(status)); + return -EINVAL; + } + + return 0; +} + +static int __maybe_unused surface_gpe_suspend(struct device *dev) +{ + return surface_lid_enable_wakeup(dev, true); +} + +static int __maybe_unused surface_gpe_resume(struct device *dev) +{ + return surface_lid_enable_wakeup(dev, false); +} + +static SIMPLE_DEV_PM_OPS(surface_gpe_pm, surface_gpe_suspend, surface_gpe_resume); + +static int surface_gpe_probe(struct platform_device *pdev) +{ + struct surface_lid_device *lid; + u32 gpe_number; + acpi_status status; + int ret; + + ret = device_property_read_u32(&pdev->dev, "gpe", &gpe_number); + if (ret) { + dev_err(&pdev->dev, "failed to read 'gpe' property: %d\n", ret); + return ret; + } + + lid = devm_kzalloc(&pdev->dev, sizeof(*lid), GFP_KERNEL); + if (!lid) + return -ENOMEM; + + lid->gpe_number = gpe_number; + platform_set_drvdata(pdev, lid); + + status = acpi_mark_gpe_for_wake(NULL, gpe_number); + if (ACPI_FAILURE(status)) { + dev_err(&pdev->dev, "failed to mark GPE for wake: %s\n", + acpi_format_exception(status)); + return -EINVAL; + } + + status = acpi_enable_gpe(NULL, gpe_number); + if (ACPI_FAILURE(status)) { + dev_err(&pdev->dev, "failed to enable GPE: %s\n", + acpi_format_exception(status)); + return -EINVAL; + } + + ret = surface_lid_enable_wakeup(&pdev->dev, false); + if (ret) + acpi_disable_gpe(NULL, gpe_number); + + return ret; +} + +static int surface_gpe_remove(struct platform_device *pdev) +{ + struct surface_lid_device *lid = dev_get_drvdata(&pdev->dev); + + /* restore default behavior without this module */ + surface_lid_enable_wakeup(&pdev->dev, false); + acpi_disable_gpe(NULL, lid->gpe_number); + + return 0; +} + +static struct platform_driver surface_gpe_driver = { + .probe = surface_gpe_probe, + .remove = surface_gpe_remove, + .driver = { + .name = "surface_gpe", + .pm = &surface_gpe_pm, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, +}; + +static struct platform_device *surface_gpe_device; + +static int __init surface_gpe_init(void) +{ + const struct dmi_system_id *match; + struct platform_device *pdev; + struct fwnode_handle *fwnode; + int status; + + match = dmi_first_match(dmi_lid_device_table); + if (!match) { + pr_info("no compatible Microsoft Surface device found, exiting\n"); + return -ENODEV; + } + + status = platform_driver_register(&surface_gpe_driver); + if (status) + return status; + + fwnode = fwnode_create_software_node(match->driver_data, NULL); + if (IS_ERR(fwnode)) { + status = PTR_ERR(fwnode); + goto err_node; + } + + pdev = platform_device_alloc("surface_gpe", PLATFORM_DEVID_NONE); + if (!pdev) { + status = -ENOMEM; + goto err_alloc; + } + + pdev->dev.fwnode = fwnode; + + status = platform_device_add(pdev); + if (status) + goto err_add; + + surface_gpe_device = pdev; + return 0; + +err_add: + platform_device_put(pdev); +err_alloc: + fwnode_remove_software_node(fwnode); +err_node: + platform_driver_unregister(&surface_gpe_driver); + return status; +} +module_init(surface_gpe_init); + +static void __exit surface_gpe_exit(void) +{ + struct fwnode_handle *fwnode = surface_gpe_device->dev.fwnode; + + platform_device_unregister(surface_gpe_device); + platform_driver_unregister(&surface_gpe_driver); + fwnode_remove_software_node(fwnode); +} +module_exit(surface_gpe_exit); + +MODULE_AUTHOR("Maximilian Luz "); +MODULE_DESCRIPTION("Surface GPE/Lid Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("dmi:*:svnMicrosoftCorporation:pnSurface*:*"); -- cgit v1.2.3