From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/x86/dell/dell-wmi-aio.c | 197 +++++++++++++++++++++++++++++++ 1 file changed, 197 insertions(+) create mode 100644 drivers/platform/x86/dell/dell-wmi-aio.c (limited to 'drivers/platform/x86/dell/dell-wmi-aio.c') diff --git a/drivers/platform/x86/dell/dell-wmi-aio.c b/drivers/platform/x86/dell/dell-wmi-aio.c new file mode 100644 index 000000000..c7b7f1e40 --- /dev/null +++ b/drivers/platform/x86/dell/dell-wmi-aio.c @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * WMI hotkeys support for Dell All-In-One series + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("WMI hotkeys driver for Dell All-In-One series"); +MODULE_LICENSE("GPL"); + +#define EVENT_GUID1 "284A0E6B-380E-472A-921F-E52786257FB4" +#define EVENT_GUID2 "02314822-307C-4F66-BF0E-48AEAEB26CC8" + +struct dell_wmi_event { + u16 length; + /* 0x000: A hot key pressed or an event occurred + * 0x00F: A sequence of hot keys are pressed */ + u16 type; + u16 event[]; +}; + +static const char *dell_wmi_aio_guids[] = { + EVENT_GUID1, + EVENT_GUID2, + NULL +}; + +MODULE_ALIAS("wmi:"EVENT_GUID1); +MODULE_ALIAS("wmi:"EVENT_GUID2); + +static const struct key_entry dell_wmi_aio_keymap[] = { + { KE_KEY, 0xc0, { KEY_VOLUMEUP } }, + { KE_KEY, 0xc1, { KEY_VOLUMEDOWN } }, + { KE_KEY, 0xe030, { KEY_VOLUMEUP } }, + { KE_KEY, 0xe02e, { KEY_VOLUMEDOWN } }, + { KE_KEY, 0xe020, { KEY_MUTE } }, + { KE_KEY, 0xe027, { KEY_DISPLAYTOGGLE } }, + { KE_KEY, 0xe006, { KEY_BRIGHTNESSUP } }, + { KE_KEY, 0xe005, { KEY_BRIGHTNESSDOWN } }, + { KE_KEY, 0xe00b, { KEY_SWITCHVIDEOMODE } }, + { KE_END, 0 } +}; + +static struct input_dev *dell_wmi_aio_input_dev; + +/* + * The new WMI event data format will follow the dell_wmi_event structure + * So, we will check if the buffer matches the format + */ +static bool dell_wmi_aio_event_check(u8 *buffer, int length) +{ + struct dell_wmi_event *event = (struct dell_wmi_event *)buffer; + + if (event == NULL || length < 6) + return false; + + if ((event->type == 0 || event->type == 0xf) && + event->length >= 2) + return true; + + return false; +} + +static void dell_wmi_aio_notify(u32 value, void *context) +{ + struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + struct dell_wmi_event *event; + acpi_status status; + + status = wmi_get_event_data(value, &response); + if (status != AE_OK) { + pr_info("bad event status 0x%x\n", status); + return; + } + + obj = (union acpi_object *)response.pointer; + if (obj) { + unsigned int scancode = 0; + + switch (obj->type) { + case ACPI_TYPE_INTEGER: + /* Most All-In-One correctly return integer scancode */ + scancode = obj->integer.value; + sparse_keymap_report_event(dell_wmi_aio_input_dev, + scancode, 1, true); + break; + case ACPI_TYPE_BUFFER: + if (dell_wmi_aio_event_check(obj->buffer.pointer, + obj->buffer.length)) { + event = (struct dell_wmi_event *) + obj->buffer.pointer; + scancode = event->event[0]; + } else { + /* Broken machines return the scancode in a + buffer */ + if (obj->buffer.pointer && + obj->buffer.length > 0) + scancode = obj->buffer.pointer[0]; + } + if (scancode) + sparse_keymap_report_event( + dell_wmi_aio_input_dev, + scancode, 1, true); + break; + } + } + kfree(obj); +} + +static int __init dell_wmi_aio_input_setup(void) +{ + int err; + + dell_wmi_aio_input_dev = input_allocate_device(); + + if (!dell_wmi_aio_input_dev) + return -ENOMEM; + + dell_wmi_aio_input_dev->name = "Dell AIO WMI hotkeys"; + dell_wmi_aio_input_dev->phys = "wmi/input0"; + dell_wmi_aio_input_dev->id.bustype = BUS_HOST; + + err = sparse_keymap_setup(dell_wmi_aio_input_dev, + dell_wmi_aio_keymap, NULL); + if (err) { + pr_err("Unable to setup input device keymap\n"); + goto err_free_dev; + } + err = input_register_device(dell_wmi_aio_input_dev); + if (err) { + pr_info("Unable to register input device\n"); + goto err_free_dev; + } + return 0; + +err_free_dev: + input_free_device(dell_wmi_aio_input_dev); + return err; +} + +static const char *dell_wmi_aio_find(void) +{ + int i; + + for (i = 0; dell_wmi_aio_guids[i] != NULL; i++) + if (wmi_has_guid(dell_wmi_aio_guids[i])) + return dell_wmi_aio_guids[i]; + + return NULL; +} + +static int __init dell_wmi_aio_init(void) +{ + int err; + const char *guid; + + guid = dell_wmi_aio_find(); + if (!guid) { + pr_warn("No known WMI GUID found\n"); + return -ENXIO; + } + + err = dell_wmi_aio_input_setup(); + if (err) + return err; + + err = wmi_install_notify_handler(guid, dell_wmi_aio_notify, NULL); + if (err) { + pr_err("Unable to register notify handler - %d\n", err); + input_unregister_device(dell_wmi_aio_input_dev); + return err; + } + + return 0; +} + +static void __exit dell_wmi_aio_exit(void) +{ + const char *guid; + + guid = dell_wmi_aio_find(); + wmi_remove_notify_handler(guid); + input_unregister_device(dell_wmi_aio_input_dev); +} + +module_init(dell_wmi_aio_init); +module_exit(dell_wmi_aio_exit); -- cgit v1.2.3