From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/x86/eeepc-wmi.c | 222 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 222 insertions(+) create mode 100644 drivers/platform/x86/eeepc-wmi.c (limited to 'drivers/platform/x86/eeepc-wmi.c') diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c new file mode 100644 index 000000000..32d9f0ba6 --- /dev/null +++ b/drivers/platform/x86/eeepc-wmi.c @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Eee PC WMI hotkey driver + * + * Copyright(C) 2010 Intel Corporation. + * Copyright(C) 2010-2011 Corentin Chary + * + * Portions based on wistron_btns.c: + * Copyright (C) 2005 Miloslav Trmac + * Copyright (C) 2005 Bernhard Rosenkraenzer + * Copyright (C) 2005 Dmitry Torokhov + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "asus-wmi.h" + +#define EEEPC_WMI_FILE "eeepc-wmi" + +MODULE_AUTHOR("Corentin Chary "); +MODULE_DESCRIPTION("Eee PC WMI Hotkey Driver"); +MODULE_LICENSE("GPL"); + +#define EEEPC_ACPI_HID "ASUS010" /* old _HID used in eeepc-laptop */ + +#define EEEPC_WMI_EVENT_GUID "ABBC0F72-8EA1-11D1-00A0-C90629100000" + +MODULE_ALIAS("wmi:"EEEPC_WMI_EVENT_GUID); + +static bool hotplug_wireless; + +module_param(hotplug_wireless, bool, 0444); +MODULE_PARM_DESC(hotplug_wireless, + "Enable hotplug for wireless device. " + "If your laptop needs that, please report to " + "acpi4asus-user@lists.sourceforge.net."); + +/* Values for T101MT "Home" key */ +#define HOME_PRESS 0xe4 +#define HOME_HOLD 0xea +#define HOME_RELEASE 0xe5 + +static const struct key_entry eeepc_wmi_keymap[] = { + { KE_KEY, ASUS_WMI_BRN_DOWN, { KEY_BRIGHTNESSDOWN } }, + { KE_KEY, ASUS_WMI_BRN_UP, { KEY_BRIGHTNESSUP } }, + /* Sleep already handled via generic ACPI code */ + { KE_KEY, 0x30, { KEY_VOLUMEUP } }, + { KE_KEY, 0x31, { KEY_VOLUMEDOWN } }, + { KE_KEY, 0x32, { KEY_MUTE } }, + { KE_KEY, 0x5c, { KEY_F15 } }, /* Power Gear key */ + { KE_KEY, 0x5d, { KEY_WLAN } }, + { KE_KEY, 0x6b, { KEY_TOUCHPAD_TOGGLE } }, /* Toggle Touchpad */ + { KE_KEY, 0x82, { KEY_CAMERA } }, + { KE_KEY, 0x83, { KEY_CAMERA_ZOOMIN } }, + { KE_KEY, 0x88, { KEY_WLAN } }, + { KE_KEY, 0xbd, { KEY_CAMERA } }, + { KE_KEY, 0xcc, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0xe0, { KEY_PROG1 } }, /* Task Manager */ + { KE_KEY, 0xe1, { KEY_F14 } }, /* Change Resolution */ + { KE_KEY, HOME_PRESS, { KEY_CONFIG } }, /* Home/Express gate key */ + { KE_KEY, 0xe8, { KEY_SCREENLOCK } }, + { KE_KEY, 0xe9, { KEY_DISPLAYTOGGLE } }, + { KE_KEY, 0xeb, { KEY_CAMERA_ZOOMOUT } }, + { KE_KEY, 0xec, { KEY_CAMERA_UP } }, + { KE_KEY, 0xed, { KEY_CAMERA_DOWN } }, + { KE_KEY, 0xee, { KEY_CAMERA_LEFT } }, + { KE_KEY, 0xef, { KEY_CAMERA_RIGHT } }, + { KE_KEY, 0xf3, { KEY_MENU } }, + { KE_KEY, 0xf5, { KEY_HOMEPAGE } }, + { KE_KEY, 0xf6, { KEY_ESC } }, + { KE_END, 0}, +}; + +static struct quirk_entry quirk_asus_unknown = { +}; + +static struct quirk_entry quirk_asus_1000h = { + .hotplug_wireless = true, +}; + +static struct quirk_entry quirk_asus_et2012_type1 = { + .store_backlight_power = true, +}; + +static struct quirk_entry quirk_asus_et2012_type3 = { + .scalar_panel_brightness = true, + .store_backlight_power = true, +}; + +static struct quirk_entry *quirks; + +static void et2012_quirks(void) +{ + const struct dmi_device *dev = NULL; + char oemstring[30]; + + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, "AEMS%24c", oemstring) == 1) { + if (oemstring[18] == '1') + quirks = &quirk_asus_et2012_type1; + else if (oemstring[18] == '3') + quirks = &quirk_asus_et2012_type3; + break; + } + } +} + +static int dmi_matched(const struct dmi_system_id *dmi) +{ + char *model; + + quirks = dmi->driver_data; + + model = (char *)dmi->matches[1].substr; + if (unlikely(strncmp(model, "ET2012", 6) == 0)) + et2012_quirks(); + + return 1; +} + +static const struct dmi_system_id asus_quirks[] = { + { + .callback = dmi_matched, + .ident = "ASUSTeK Computer INC. 1000H", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "1000H"), + }, + .driver_data = &quirk_asus_1000h, + }, + { + .callback = dmi_matched, + .ident = "ASUSTeK Computer INC. ET2012E/I", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "ET2012"), + }, + .driver_data = &quirk_asus_unknown, + }, + {} +}; + +static void eeepc_wmi_key_filter(struct asus_wmi_driver *asus_wmi, int *code, + unsigned int *value, bool *autorelease) +{ + switch (*code) { + case HOME_PRESS: + *value = 1; + *autorelease = 0; + break; + case HOME_HOLD: + *code = ASUS_WMI_KEY_IGNORE; + break; + case HOME_RELEASE: + *code = HOME_PRESS; + *value = 0; + *autorelease = 0; + break; + } +} + +static int eeepc_wmi_probe(struct platform_device *pdev) +{ + if (acpi_dev_found(EEEPC_ACPI_HID)) { + pr_warn("Found legacy ATKD device (%s)\n", EEEPC_ACPI_HID); + pr_warn("WMI device present, but legacy ATKD device is also " + "present and enabled\n"); + pr_warn("You probably booted with acpi_osi=\"Linux\" or " + "acpi_osi=\"!Windows 2009\"\n"); + pr_warn("Can't load eeepc-wmi, use default acpi_osi " + "(preferred) or eeepc-laptop\n"); + return -EBUSY; + } + return 0; +} + +static void eeepc_wmi_quirks(struct asus_wmi_driver *driver) +{ + quirks = &quirk_asus_unknown; + quirks->hotplug_wireless = hotplug_wireless; + + dmi_check_system(asus_quirks); + + driver->quirks = quirks; + driver->quirks->wapf = -1; + driver->panel_power = FB_BLANK_UNBLANK; +} + +static struct asus_wmi_driver asus_wmi_driver = { + .name = EEEPC_WMI_FILE, + .owner = THIS_MODULE, + .event_guid = EEEPC_WMI_EVENT_GUID, + .keymap = eeepc_wmi_keymap, + .input_name = "Eee PC WMI hotkeys", + .input_phys = EEEPC_WMI_FILE "/input0", + .key_filter = eeepc_wmi_key_filter, + .probe = eeepc_wmi_probe, + .detect_quirks = eeepc_wmi_quirks, +}; + + +static int __init eeepc_wmi_init(void) +{ + return asus_wmi_register_driver(&asus_wmi_driver); +} + +static void __exit eeepc_wmi_exit(void) +{ + asus_wmi_unregister_driver(&asus_wmi_driver); +} + +module_init(eeepc_wmi_init); +module_exit(eeepc_wmi_exit); -- cgit v1.2.3