From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/x86/intel/atomisp2/Kconfig | 43 ++++++++ drivers/platform/x86/intel/atomisp2/Makefile | 9 ++ drivers/platform/x86/intel/atomisp2/led.c | 117 ++++++++++++++++++++++ drivers/platform/x86/intel/atomisp2/pm.c | 143 +++++++++++++++++++++++++++ 4 files changed, 312 insertions(+) create mode 100644 drivers/platform/x86/intel/atomisp2/Kconfig create mode 100644 drivers/platform/x86/intel/atomisp2/Makefile create mode 100644 drivers/platform/x86/intel/atomisp2/led.c create mode 100644 drivers/platform/x86/intel/atomisp2/pm.c (limited to 'drivers/platform/x86/intel/atomisp2') diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig new file mode 100644 index 000000000..35dd2be9d --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/Kconfig @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +config INTEL_ATOMISP2_PDX86 + bool + +config INTEL_ATOMISP2_LED + tristate "Intel AtomISP v2 camera LED driver" + depends on GPIOLIB && LEDS_GPIO + select INTEL_ATOMISP2_PDX86 + help + Many Bay Trail and Cherry Trail devices come with a camera attached + to Intel's Image Signal Processor. Linux currently does not have a + driver for these, so they do not work as a camera. Some of these + camera's have a LED which is controlled through a GPIO. + + Some of these devices have a firmware issue where the LED gets turned + on at boot. This driver will turn the LED off at boot and also allows + controlling the LED (repurposing it) through the sysfs LED interface. + + Which GPIO is attached to the LED is usually not described in the + ACPI tables, so this driver contains per-system info about the GPIO + inside the driver, this means that this driver only works on systems + the driver knows about. + + To compile this driver as a module, choose M here: the module + will be called intel_atomisp2_led. + +config INTEL_ATOMISP2_PM + tristate "Intel AtomISP v2 dummy / power-management driver" + depends on PCI && IOSF_MBI && PM + depends on !INTEL_ATOMISP + select INTEL_ATOMISP2_PDX86 + help + Power-management driver for Intel's Image Signal Processor found on + Bay Trail and Cherry Trail devices. This dummy driver's sole purpose + is to turn the ISP off (put it in D3) to save power and to allow + entering of S0ix modes. + + To compile this driver as a module, choose M here: the module + will be called intel_atomisp2_pm. diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile new file mode 100644 index 000000000..96b1e877d --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +intel_atomisp2_led-y := led.o +obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o +intel_atomisp2_pm-y += pm.o +obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o diff --git a/drivers/platform/x86/intel/atomisp2/led.c b/drivers/platform/x86/intel/atomisp2/led.c new file mode 100644 index 000000000..10077a61d --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/led.c @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for controlling LEDs for cameras connected to the Intel atomisp2 + * The main purpose of this driver is to turn off LEDs which are on at boot. + * + * Copyright (C) 2020 Hans de Goede + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* This must be leds-gpio as the leds-gpio driver binds to the name */ +#define DEV_NAME "leds-gpio" + +static const struct gpio_led atomisp2_leds[] = { + { + .name = "atomisp2::camera", + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static const struct gpio_led_platform_data atomisp2_leds_pdata = { + .num_leds = ARRAY_SIZE(atomisp2_leds), + .leds = atomisp2_leds, +}; + +static struct gpiod_lookup_table asus_t100ta_lookup = { + .dev_id = DEV_NAME, + .table = { + GPIO_LOOKUP_IDX("INT33FC:02", 8, NULL, 0, GPIO_ACTIVE_HIGH), + { } + } +}; + +static struct gpiod_lookup_table asus_t100chi_lookup = { + .dev_id = DEV_NAME, + .table = { + GPIO_LOOKUP_IDX("INT33FC:01", 24, NULL, 0, GPIO_ACTIVE_HIGH), + { } + } +}; + +static const struct dmi_system_id atomisp2_led_systems[] __initconst = { + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + /* Non exact match to also match T100TAF */ + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), + }, + .driver_data = &asus_t100ta_lookup, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T200TA"), + }, + .driver_data = &asus_t100ta_lookup, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100CHI"), + }, + .driver_data = &asus_t100chi_lookup, + }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(dmi, atomisp2_led_systems); + +static struct gpiod_lookup_table *gpio_lookup; +static struct platform_device *pdev; + +static int __init atomisp2_led_init(void) +{ + const struct dmi_system_id *system; + + system = dmi_first_match(atomisp2_led_systems); + if (!system) + return -ENODEV; + + gpio_lookup = system->driver_data; + gpiod_add_lookup_table(gpio_lookup); + + pdev = platform_device_register_resndata(NULL, + DEV_NAME, PLATFORM_DEVID_NONE, + NULL, 0, &atomisp2_leds_pdata, + sizeof(atomisp2_leds_pdata)); + if (IS_ERR(pdev)) + gpiod_remove_lookup_table(gpio_lookup); + + return PTR_ERR_OR_ZERO(pdev); +} + +static void __exit atomisp2_led_cleanup(void) +{ + platform_device_unregister(pdev); + gpiod_remove_lookup_table(gpio_lookup); +} + +module_init(atomisp2_led_init); +module_exit(atomisp2_led_cleanup); + +/* + * The ACPI INIT method from Asus WMI's code on the T100TA and T200TA turns the + * LED on (without the WMI interface allowing further control over the LED). + * Ensure we are loaded after asus-nb-wmi so that we turn the LED off again. + */ +MODULE_SOFTDEP("pre: asus_nb_wmi"); +MODULE_AUTHOR("Hans de Goede + * + * Based on various non upstream patches for ISP support: + * Copyright (C) 2010-2017 Intel Corporation. All rights reserved. + * Copyright (c) 2010 Silicon Hive www.siliconhive.com. + */ + +#include +#include +#include +#include +#include +#include + +/* PCI configuration regs */ +#define PCI_INTERRUPT_CTRL 0x9c + +#define PCI_CSI_CONTROL 0xe8 +#define PCI_CSI_CONTROL_PORTS_OFF_MASK 0x7 + +/* IOSF BT_MBI_UNIT_PMC regs */ +#define ISPSSPM0 0x39 +#define ISPSSPM0_ISPSSC_OFFSET 0 +#define ISPSSPM0_ISPSSC_MASK 0x00000003 +#define ISPSSPM0_ISPSSS_OFFSET 24 +#define ISPSSPM0_ISPSSS_MASK 0x03000000 +#define ISPSSPM0_IUNIT_POWER_ON 0x0 +#define ISPSSPM0_IUNIT_POWER_OFF 0x3 + +static int isp_set_power(struct pci_dev *dev, bool enable) +{ + unsigned long timeout; + u32 val = enable ? ISPSSPM0_IUNIT_POWER_ON : ISPSSPM0_IUNIT_POWER_OFF; + + /* Write to ISPSSPM0 bit[1:0] to power on/off the IUNIT */ + iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, + val, ISPSSPM0_ISPSSC_MASK); + + /* + * There should be no IUNIT access while power-down is + * in progress. HW sighting: 4567865. + * Wait up to 50 ms for the IUNIT to shut down. + * And we do the same for power on. + */ + timeout = jiffies + msecs_to_jiffies(50); + do { + u32 tmp; + + /* Wait until ISPSSPM0 bit[25:24] shows the right value */ + iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &tmp); + tmp = (tmp & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET; + if (tmp == val) + return 0; + + usleep_range(1000, 2000); + } while (time_before(jiffies, timeout)); + + dev_err(&dev->dev, "IUNIT power-%s timeout.\n", enable ? "on" : "off"); + return -EBUSY; +} + +static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + pm_runtime_allow(&dev->dev); + pm_runtime_put_sync_suspend(&dev->dev); + + return 0; +} + +static void isp_remove(struct pci_dev *dev) +{ + pm_runtime_get_sync(&dev->dev); + pm_runtime_forbid(&dev->dev); +} + +static int isp_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + u32 val; + + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, 0); + + /* + * MRFLD IUNIT DPHY is located in an always-power-on island + * MRFLD HW design need all CSI ports are disabled before + * powering down the IUNIT. + */ + pci_read_config_dword(pdev, PCI_CSI_CONTROL, &val); + val |= PCI_CSI_CONTROL_PORTS_OFF_MASK; + pci_write_config_dword(pdev, PCI_CSI_CONTROL, val); + + /* + * We lose config space access when punit power gates + * the ISP. Can't use pci_set_power_state() because + * pmcsr won't actually change when we write to it. + */ + pci_save_state(pdev); + pdev->current_state = PCI_D3cold; + isp_set_power(pdev, false); + + return 0; +} + +static int isp_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + isp_set_power(pdev, true); + pdev->current_state = PCI_D0; + pci_restore_state(pdev); + + return 0; +} + +static UNIVERSAL_DEV_PM_OPS(isp_pm_ops, isp_pci_suspend, + isp_pci_resume, NULL); + +static const struct pci_device_id isp_id_table[] = { + { PCI_VDEVICE(INTEL, 0x0f38), }, + { PCI_VDEVICE(INTEL, 0x22b8), }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, isp_id_table); + +static struct pci_driver isp_pci_driver = { + .name = "intel_atomisp2_pm", + .id_table = isp_id_table, + .probe = isp_probe, + .remove = isp_remove, + .driver.pm = &isp_pm_ops, +}; + +module_pci_driver(isp_pci_driver); + +MODULE_DESCRIPTION("Intel AtomISP2 dummy / power-management drv (for suspend)"); +MODULE_AUTHOR("Hans de Goede "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3