From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/x86/intel/sdsi.c | 672 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 672 insertions(+) create mode 100644 drivers/platform/x86/intel/sdsi.c (limited to 'drivers/platform/x86/intel/sdsi.c') diff --git a/drivers/platform/x86/intel/sdsi.c b/drivers/platform/x86/intel/sdsi.c new file mode 100644 index 000000000..9e0ea2cdd --- /dev/null +++ b/drivers/platform/x86/intel/sdsi.c @@ -0,0 +1,672 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel On Demand (Software Defined Silicon) driver + * + * Copyright (c) 2022, Intel Corporation. + * All Rights Reserved. + * + * Author: "David E. Box" + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vsec.h" + +#define ACCESS_TYPE_BARID 2 +#define ACCESS_TYPE_LOCAL 3 + +#define SDSI_MIN_SIZE_DWORDS 276 +#define SDSI_SIZE_MAILBOX 1024 +#define SDSI_SIZE_REGS 80 +#define SDSI_SIZE_CMD sizeof(u64) + +/* + * Write messages are currently up to the size of the mailbox + * while read messages are up to 4 times the size of the + * mailbox, sent in packets + */ +#define SDSI_SIZE_WRITE_MSG SDSI_SIZE_MAILBOX +#define SDSI_SIZE_READ_MSG (SDSI_SIZE_MAILBOX * 4) + +#define SDSI_ENABLED_FEATURES_OFFSET 16 +#define SDSI_FEATURE_SDSI BIT(3) +#define SDSI_FEATURE_METERING BIT(26) + +#define SDSI_SOCKET_ID_OFFSET 64 +#define SDSI_SOCKET_ID GENMASK(3, 0) + +#define SDSI_MBOX_CMD_SUCCESS 0x40 +#define SDSI_MBOX_CMD_TIMEOUT 0x80 + +#define MBOX_TIMEOUT_US 2000 +#define MBOX_TIMEOUT_ACQUIRE_US 1000 +#define MBOX_POLLING_PERIOD_US 100 +#define MBOX_ACQUIRE_NUM_RETRIES 5 +#define MBOX_ACQUIRE_RETRY_DELAY_MS 500 +#define MBOX_MAX_PACKETS 4 + +#define MBOX_OWNER_NONE 0x00 +#define MBOX_OWNER_INBAND 0x01 + +#define CTRL_RUN_BUSY BIT(0) +#define CTRL_READ_WRITE BIT(1) +#define CTRL_SOM BIT(2) +#define CTRL_EOM BIT(3) +#define CTRL_OWNER GENMASK(5, 4) +#define CTRL_COMPLETE BIT(6) +#define CTRL_READY BIT(7) +#define CTRL_STATUS GENMASK(15, 8) +#define CTRL_PACKET_SIZE GENMASK(31, 16) +#define CTRL_MSG_SIZE GENMASK(63, 48) + +#define DISC_TABLE_SIZE 12 +#define DT_ACCESS_TYPE GENMASK(3, 0) +#define DT_SIZE GENMASK(27, 12) +#define DT_TBIR GENMASK(2, 0) +#define DT_OFFSET(v) ((v) & GENMASK(31, 3)) + +#define SDSI_GUID_V1 0x006DD191 +#define GUID_V1_CNTRL_SIZE 8 +#define GUID_V1_REGS_SIZE 72 +#define SDSI_GUID_V2 0xF210D9EF +#define GUID_V2_CNTRL_SIZE 16 +#define GUID_V2_REGS_SIZE 80 + +enum sdsi_command { + SDSI_CMD_PROVISION_AKC = 0x0004, + SDSI_CMD_PROVISION_CAP = 0x0008, + SDSI_CMD_READ_STATE = 0x0010, + SDSI_CMD_READ_METER = 0x0014, +}; + +struct sdsi_mbox_info { + u64 *payload; + void *buffer; + int size; +}; + +struct disc_table { + u32 access_info; + u32 guid; + u32 offset; +}; + +struct sdsi_priv { + struct mutex mb_lock; /* Mailbox access lock */ + struct device *dev; + void __iomem *control_addr; + void __iomem *mbox_addr; + void __iomem *regs_addr; + int control_size; + int maibox_size; + int registers_size; + u32 guid; + u32 features; +}; + +/* SDSi mailbox operations must be performed using 64bit mov instructions */ +static __always_inline void +sdsi_memcpy64_toio(u64 __iomem *to, const u64 *from, size_t count_bytes) +{ + size_t count = count_bytes / sizeof(*to); + int i; + + for (i = 0; i < count; i++) + writeq(from[i], &to[i]); +} + +static __always_inline void +sdsi_memcpy64_fromio(u64 *to, const u64 __iomem *from, size_t count_bytes) +{ + size_t count = count_bytes / sizeof(*to); + int i; + + for (i = 0; i < count; i++) + to[i] = readq(&from[i]); +} + +static inline void sdsi_complete_transaction(struct sdsi_priv *priv) +{ + u64 control = FIELD_PREP(CTRL_COMPLETE, 1); + + lockdep_assert_held(&priv->mb_lock); + writeq(control, priv->control_addr); +} + +static int sdsi_status_to_errno(u32 status) +{ + switch (status) { + case SDSI_MBOX_CMD_SUCCESS: + return 0; + case SDSI_MBOX_CMD_TIMEOUT: + return -ETIMEDOUT; + default: + return -EIO; + } +} + +static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, + size_t *data_size) +{ + struct device *dev = priv->dev; + u32 total, loop, eom, status, message_size; + u64 control; + int ret; + + lockdep_assert_held(&priv->mb_lock); + + /* Format and send the read command */ + control = FIELD_PREP(CTRL_EOM, 1) | + FIELD_PREP(CTRL_SOM, 1) | + FIELD_PREP(CTRL_RUN_BUSY, 1) | + FIELD_PREP(CTRL_PACKET_SIZE, info->size); + writeq(control, priv->control_addr); + + /* For reads, data sizes that are larger than the mailbox size are read in packets. */ + total = 0; + loop = 0; + do { + void *buf = info->buffer + (SDSI_SIZE_MAILBOX * loop); + u32 packet_size; + + /* Poll on ready bit */ + ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY, + MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US); + if (ret) + break; + + eom = FIELD_GET(CTRL_EOM, control); + status = FIELD_GET(CTRL_STATUS, control); + packet_size = FIELD_GET(CTRL_PACKET_SIZE, control); + message_size = FIELD_GET(CTRL_MSG_SIZE, control); + + ret = sdsi_status_to_errno(status); + if (ret) + break; + + /* Only the last packet can be less than the mailbox size. */ + if (!eom && packet_size != SDSI_SIZE_MAILBOX) { + dev_err(dev, "Invalid packet size\n"); + ret = -EPROTO; + break; + } + + if (packet_size > SDSI_SIZE_MAILBOX) { + dev_err(dev, "Packet size too large\n"); + ret = -EPROTO; + break; + } + + sdsi_memcpy64_fromio(buf, priv->mbox_addr, round_up(packet_size, SDSI_SIZE_CMD)); + + total += packet_size; + + sdsi_complete_transaction(priv); + } while (!eom && ++loop < MBOX_MAX_PACKETS); + + if (ret) { + sdsi_complete_transaction(priv); + return ret; + } + + if (!eom) { + dev_err(dev, "Exceeded read attempts\n"); + return -EPROTO; + } + + /* Message size check is only valid for multi-packet transfers */ + if (loop && total != message_size) + dev_warn(dev, "Read count %u differs from expected count %u\n", + total, message_size); + + *data_size = total; + + return 0; +} + +static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info) +{ + u64 control; + u32 status; + int ret; + + lockdep_assert_held(&priv->mb_lock); + + /* Write rest of the payload */ + sdsi_memcpy64_toio(priv->mbox_addr + SDSI_SIZE_CMD, info->payload + 1, + info->size - SDSI_SIZE_CMD); + + /* Format and send the write command */ + control = FIELD_PREP(CTRL_EOM, 1) | + FIELD_PREP(CTRL_SOM, 1) | + FIELD_PREP(CTRL_RUN_BUSY, 1) | + FIELD_PREP(CTRL_READ_WRITE, 1) | + FIELD_PREP(CTRL_PACKET_SIZE, info->size); + writeq(control, priv->control_addr); + + /* Poll on ready bit */ + ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY, + MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US); + + if (ret) + goto release_mbox; + + status = FIELD_GET(CTRL_STATUS, control); + ret = sdsi_status_to_errno(status); + +release_mbox: + sdsi_complete_transaction(priv); + + return ret; +} + +static int sdsi_mbox_acquire(struct sdsi_priv *priv, struct sdsi_mbox_info *info) +{ + u64 control; + u32 owner; + int ret, retries = 0; + + lockdep_assert_held(&priv->mb_lock); + + /* Check mailbox is available */ + control = readq(priv->control_addr); + owner = FIELD_GET(CTRL_OWNER, control); + if (owner != MBOX_OWNER_NONE) + return -EBUSY; + + /* + * If there has been no recent transaction and no one owns the mailbox, + * we should acquire it in under 1ms. However, if we've accessed it + * recently it may take up to 2.1 seconds to acquire it again. + */ + do { + /* Write first qword of payload */ + writeq(info->payload[0], priv->mbox_addr); + + /* Check for ownership */ + ret = readq_poll_timeout(priv->control_addr, control, + FIELD_GET(CTRL_OWNER, control) == MBOX_OWNER_INBAND, + MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_ACQUIRE_US); + + if (FIELD_GET(CTRL_OWNER, control) == MBOX_OWNER_NONE && + retries++ < MBOX_ACQUIRE_NUM_RETRIES) { + msleep(MBOX_ACQUIRE_RETRY_DELAY_MS); + continue; + } + + /* Either we got it or someone else did. */ + break; + } while (true); + + return ret; +} + +static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info) +{ + int ret; + + lockdep_assert_held(&priv->mb_lock); + + ret = sdsi_mbox_acquire(priv, info); + if (ret) + return ret; + + return sdsi_mbox_cmd_write(priv, info); +} + +static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, size_t *data_size) +{ + int ret; + + lockdep_assert_held(&priv->mb_lock); + + ret = sdsi_mbox_acquire(priv, info); + if (ret) + return ret; + + return sdsi_mbox_cmd_read(priv, info, data_size); +} + +static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count, + enum sdsi_command command) +{ + struct sdsi_mbox_info info; + int ret; + + if (count > (SDSI_SIZE_WRITE_MSG - SDSI_SIZE_CMD)) + return -EOVERFLOW; + + /* Qword aligned message + command qword */ + info.size = round_up(count, SDSI_SIZE_CMD) + SDSI_SIZE_CMD; + + info.payload = kzalloc(info.size, GFP_KERNEL); + if (!info.payload) + return -ENOMEM; + + /* Copy message to payload buffer */ + memcpy(info.payload, buf, count); + + /* Command is last qword of payload buffer */ + info.payload[(info.size - SDSI_SIZE_CMD) / SDSI_SIZE_CMD] = command; + + ret = mutex_lock_interruptible(&priv->mb_lock); + if (ret) + goto free_payload; + ret = sdsi_mbox_write(priv, &info); + mutex_unlock(&priv->mb_lock); + +free_payload: + kfree(info.payload); + + if (ret) + return ret; + + return count; +} + +static ssize_t provision_akc_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + + if (off) + return -ESPIPE; + + return sdsi_provision(priv, buf, count, SDSI_CMD_PROVISION_AKC); +} +static BIN_ATTR_WO(provision_akc, SDSI_SIZE_WRITE_MSG); + +static ssize_t provision_cap_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + + if (off) + return -ESPIPE; + + return sdsi_provision(priv, buf, count, SDSI_CMD_PROVISION_CAP); +} +static BIN_ATTR_WO(provision_cap, SDSI_SIZE_WRITE_MSG); + +static ssize_t +certificate_read(u64 command, struct sdsi_priv *priv, char *buf, loff_t off, + size_t count) +{ + struct sdsi_mbox_info info; + size_t size; + int ret; + + if (off) + return 0; + + /* Buffer for return data */ + info.buffer = kmalloc(SDSI_SIZE_READ_MSG, GFP_KERNEL); + if (!info.buffer) + return -ENOMEM; + + info.payload = &command; + info.size = sizeof(command); + + ret = mutex_lock_interruptible(&priv->mb_lock); + if (ret) + goto free_buffer; + ret = sdsi_mbox_read(priv, &info, &size); + mutex_unlock(&priv->mb_lock); + if (ret < 0) + goto free_buffer; + + if (size > count) + size = count; + + memcpy(buf, info.buffer, size); + +free_buffer: + kfree(info.buffer); + + if (ret) + return ret; + + return size; +} + +static ssize_t +state_certificate_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + + return certificate_read(SDSI_CMD_READ_STATE, priv, buf, off, count); +} +static BIN_ATTR_ADMIN_RO(state_certificate, SDSI_SIZE_READ_MSG); + +static ssize_t +meter_certificate_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + + return certificate_read(SDSI_CMD_READ_METER, priv, buf, off, count); +} +static BIN_ATTR_ADMIN_RO(meter_certificate, SDSI_SIZE_READ_MSG); + +static ssize_t registers_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + void __iomem *addr = priv->regs_addr; + int size = priv->registers_size; + + /* + * The check below is performed by the sysfs caller based on the static + * file size. But this may be greater than the actual size which is based + * on the GUID. So check here again based on actual size before reading. + */ + if (off >= size) + return 0; + + if (off + count > size) + count = size - off; + + memcpy_fromio(buf, addr + off, count); + + return count; +} +static BIN_ATTR_ADMIN_RO(registers, SDSI_SIZE_REGS); + +static struct bin_attribute *sdsi_bin_attrs[] = { + &bin_attr_registers, + &bin_attr_state_certificate, + &bin_attr_meter_certificate, + &bin_attr_provision_akc, + &bin_attr_provision_cap, + NULL +}; + +static umode_t +sdsi_battr_is_visible(struct kobject *kobj, struct bin_attribute *attr, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + + /* Registers file is always readable if the device is present */ + if (attr == &bin_attr_registers) + return attr->attr.mode; + + /* All other attributes not visible if BIOS has not enabled On Demand */ + if (!(priv->features & SDSI_FEATURE_SDSI)) + return 0; + + if (attr == &bin_attr_meter_certificate) + return (priv->features & SDSI_FEATURE_METERING) ? + attr->attr.mode : 0; + + return attr->attr.mode; +} + +static ssize_t guid_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sdsi_priv *priv = dev_get_drvdata(dev); + + return sysfs_emit(buf, "0x%x\n", priv->guid); +} +static DEVICE_ATTR_RO(guid); + +static struct attribute *sdsi_attrs[] = { + &dev_attr_guid.attr, + NULL +}; + +static const struct attribute_group sdsi_group = { + .attrs = sdsi_attrs, + .bin_attrs = sdsi_bin_attrs, + .is_bin_visible = sdsi_battr_is_visible, +}; +__ATTRIBUTE_GROUPS(sdsi); + +static int sdsi_get_layout(struct sdsi_priv *priv, struct disc_table *table) +{ + switch (table->guid) { + case SDSI_GUID_V1: + priv->control_size = GUID_V1_CNTRL_SIZE; + priv->registers_size = GUID_V1_REGS_SIZE; + break; + case SDSI_GUID_V2: + priv->control_size = GUID_V2_CNTRL_SIZE; + priv->registers_size = GUID_V2_REGS_SIZE; + break; + default: + dev_err(priv->dev, "Unrecognized GUID 0x%x\n", table->guid); + return -EINVAL; + } + return 0; +} + +static int sdsi_map_mbox_registers(struct sdsi_priv *priv, struct pci_dev *parent, + struct disc_table *disc_table, struct resource *disc_res) +{ + u32 access_type = FIELD_GET(DT_ACCESS_TYPE, disc_table->access_info); + u32 size = FIELD_GET(DT_SIZE, disc_table->access_info); + u32 tbir = FIELD_GET(DT_TBIR, disc_table->offset); + u32 offset = DT_OFFSET(disc_table->offset); + struct resource res = {}; + + /* Starting location of SDSi MMIO region based on access type */ + switch (access_type) { + case ACCESS_TYPE_LOCAL: + if (tbir) { + dev_err(priv->dev, "Unsupported BAR index %u for access type %u\n", + tbir, access_type); + return -EINVAL; + } + + /* + * For access_type LOCAL, the base address is as follows: + * base address = end of discovery region + base offset + 1 + */ + res.start = disc_res->end + offset + 1; + break; + + case ACCESS_TYPE_BARID: + res.start = pci_resource_start(parent, tbir) + offset; + break; + + default: + dev_err(priv->dev, "Unrecognized access_type %u\n", access_type); + return -EINVAL; + } + + res.end = res.start + size * sizeof(u32) - 1; + res.flags = IORESOURCE_MEM; + + priv->control_addr = devm_ioremap_resource(priv->dev, &res); + if (IS_ERR(priv->control_addr)) + return PTR_ERR(priv->control_addr); + + priv->mbox_addr = priv->control_addr + priv->control_size; + priv->regs_addr = priv->mbox_addr + SDSI_SIZE_MAILBOX; + + priv->features = readq(priv->regs_addr + SDSI_ENABLED_FEATURES_OFFSET); + + return 0; +} + +static int sdsi_probe(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id) +{ + struct intel_vsec_device *intel_cap_dev = auxdev_to_ivdev(auxdev); + struct disc_table disc_table; + struct resource *disc_res; + void __iomem *disc_addr; + struct sdsi_priv *priv; + int ret; + + priv = devm_kzalloc(&auxdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &auxdev->dev; + mutex_init(&priv->mb_lock); + auxiliary_set_drvdata(auxdev, priv); + + /* Get the SDSi discovery table */ + disc_res = &intel_cap_dev->resource[0]; + disc_addr = devm_ioremap_resource(&auxdev->dev, disc_res); + if (IS_ERR(disc_addr)) + return PTR_ERR(disc_addr); + + memcpy_fromio(&disc_table, disc_addr, DISC_TABLE_SIZE); + + priv->guid = disc_table.guid; + + /* Get guid based layout info */ + ret = sdsi_get_layout(priv, &disc_table); + if (ret) + return ret; + + /* Map the SDSi mailbox registers */ + ret = sdsi_map_mbox_registers(priv, intel_cap_dev->pcidev, &disc_table, disc_res); + if (ret) + return ret; + + return 0; +} + +static const struct auxiliary_device_id sdsi_aux_id_table[] = { + { .name = "intel_vsec.sdsi" }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, sdsi_aux_id_table); + +static struct auxiliary_driver sdsi_aux_driver = { + .driver = { + .dev_groups = sdsi_groups, + }, + .id_table = sdsi_aux_id_table, + .probe = sdsi_probe, + /* No remove. All resources are handled under devm */ +}; +module_auxiliary_driver(sdsi_aux_driver); + +MODULE_AUTHOR("David E. Box "); +MODULE_DESCRIPTION("Intel On Demand (SDSi) driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3