From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/x86/meraki-mx100.c | 230 ++++++++++++++++++++++++++++++++++++ 1 file changed, 230 insertions(+) create mode 100644 drivers/platform/x86/meraki-mx100.c (limited to 'drivers/platform/x86/meraki-mx100.c') diff --git a/drivers/platform/x86/meraki-mx100.c b/drivers/platform/x86/meraki-mx100.c new file mode 100644 index 000000000..3751ed36a --- /dev/null +++ b/drivers/platform/x86/meraki-mx100.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * Cisco Meraki MX100 (Tinkerbell) board platform driver + * + * Based off of arch/x86/platform/meraki/tink.c from the + * Meraki GPL release meraki-firmware-sources-r23-20150601 + * + * Format inspired by platform/x86/pcengines-apuv2.c + * + * Copyright (C) 2021 Chris Blake + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TINK_GPIO_DRIVER_NAME "gpio_ich" + +/* LEDs */ +static const struct gpio_led tink_leds[] = { + { + .name = "mx100:green:internet", + .default_trigger = "default-on", + }, + { + .name = "mx100:green:lan2", + }, + { + .name = "mx100:green:lan3", + }, + { + .name = "mx100:green:lan4", + }, + { + .name = "mx100:green:lan5", + }, + { + .name = "mx100:green:lan6", + }, + { + .name = "mx100:green:lan7", + }, + { + .name = "mx100:green:lan8", + }, + { + .name = "mx100:green:lan9", + }, + { + .name = "mx100:green:lan10", + }, + { + .name = "mx100:green:lan11", + }, + { + .name = "mx100:green:ha", + }, + { + .name = "mx100:orange:ha", + }, + { + .name = "mx100:green:usb", + }, + { + .name = "mx100:orange:usb", + }, +}; + +static const struct gpio_led_platform_data tink_leds_pdata = { + .num_leds = ARRAY_SIZE(tink_leds), + .leds = tink_leds, +}; + +static struct gpiod_lookup_table tink_leds_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 11, + NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 18, + NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 20, + NULL, 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 22, + NULL, 3, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 23, + NULL, 4, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 32, + NULL, 5, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 34, + NULL, 6, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 35, + NULL, 7, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 36, + NULL, 8, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 37, + NULL, 9, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 48, + NULL, 10, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 16, + NULL, 11, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 7, + NULL, 12, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 21, + NULL, 13, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 19, + NULL, 14, GPIO_ACTIVE_LOW), + {} /* Terminating entry */ + } +}; + +/* Reset Button */ +static struct gpio_keys_button tink_buttons[] = { + { + .desc = "Reset", + .type = EV_KEY, + .code = KEY_RESTART, + .active_low = 1, + .debounce_interval = 100, + }, +}; + +static const struct gpio_keys_platform_data tink_buttons_pdata = { + .buttons = tink_buttons, + .nbuttons = ARRAY_SIZE(tink_buttons), + .poll_interval = 20, + .rep = 0, + .name = "mx100-keys", +}; + +static struct gpiod_lookup_table tink_keys_table = { + .dev_id = "gpio-keys-polled", + .table = { + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 60, + NULL, 0, GPIO_ACTIVE_LOW), + {} /* Terminating entry */ + } +}; + +/* Board setup */ +static const struct dmi_system_id tink_systems[] __initconst = { + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Cisco"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MX100-HW"), + }, + }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(dmi, tink_systems); + +static struct platform_device *tink_leds_pdev; +static struct platform_device *tink_keys_pdev; + +static struct platform_device * __init tink_create_dev( + const char *name, const void *pdata, size_t sz) +{ + struct platform_device *pdev; + + pdev = platform_device_register_data(NULL, + name, PLATFORM_DEVID_NONE, pdata, sz); + if (IS_ERR(pdev)) + pr_err("failed registering %s: %ld\n", name, PTR_ERR(pdev)); + + return pdev; +} + +static int __init tink_board_init(void) +{ + int ret; + + if (!dmi_first_match(tink_systems)) + return -ENODEV; + + /* + * We need to make sure that GPIO60 isn't set to native mode as is default since it's our + * Reset Button. To do this, write to GPIO_USE_SEL2 to have GPIO60 set to GPIO mode. + * This is documented on page 1609 of the PCH datasheet, order number 327879-005US + */ + outl(inl(0x530) | BIT(28), 0x530); + + gpiod_add_lookup_table(&tink_leds_table); + gpiod_add_lookup_table(&tink_keys_table); + + tink_leds_pdev = tink_create_dev("leds-gpio", + &tink_leds_pdata, sizeof(tink_leds_pdata)); + if (IS_ERR(tink_leds_pdev)) { + ret = PTR_ERR(tink_leds_pdev); + goto err; + } + + tink_keys_pdev = tink_create_dev("gpio-keys-polled", + &tink_buttons_pdata, sizeof(tink_buttons_pdata)); + if (IS_ERR(tink_keys_pdev)) { + ret = PTR_ERR(tink_keys_pdev); + platform_device_unregister(tink_leds_pdev); + goto err; + } + + return 0; + +err: + gpiod_remove_lookup_table(&tink_keys_table); + gpiod_remove_lookup_table(&tink_leds_table); + return ret; +} +module_init(tink_board_init); + +static void __exit tink_board_exit(void) +{ + platform_device_unregister(tink_keys_pdev); + platform_device_unregister(tink_leds_pdev); + gpiod_remove_lookup_table(&tink_keys_table); + gpiod_remove_lookup_table(&tink_leds_table); +} +module_exit(tink_board_exit); + +MODULE_AUTHOR("Chris Blake "); +MODULE_DESCRIPTION("Cisco Meraki MX100 Platform Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:meraki-mx100"); -- cgit v1.2.3