From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/power/reset/oxnas-restart.c | 233 ++++++++++++++++++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100644 drivers/power/reset/oxnas-restart.c (limited to 'drivers/power/reset/oxnas-restart.c') diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c new file mode 100644 index 000000000..13090bec0 --- /dev/null +++ b/drivers/power/reset/oxnas-restart.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * oxnas SoC reset driver + * based on: + * Microsemi MIPS SoC reset driver + * and ox820_assert_system_reset() written by Ma Hajun + * + * Copyright (c) 2013 Ma Hajun + * Copyright (c) 2017 Microsemi Corporation + * Copyright (c) 2020 Daniel Golle + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* bit numbers of reset control register */ +#define OX820_SYS_CTRL_RST_SCU 0 +#define OX820_SYS_CTRL_RST_COPRO 1 +#define OX820_SYS_CTRL_RST_ARM0 2 +#define OX820_SYS_CTRL_RST_ARM1 3 +#define OX820_SYS_CTRL_RST_USBHS 4 +#define OX820_SYS_CTRL_RST_USBHSPHYA 5 +#define OX820_SYS_CTRL_RST_MACA 6 +#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA +#define OX820_SYS_CTRL_RST_PCIEA 7 +#define OX820_SYS_CTRL_RST_SGDMA 8 +#define OX820_SYS_CTRL_RST_CIPHER 9 +#define OX820_SYS_CTRL_RST_DDR 10 +#define OX820_SYS_CTRL_RST_SATA 11 +#define OX820_SYS_CTRL_RST_SATA_LINK 12 +#define OX820_SYS_CTRL_RST_SATA_PHY 13 +#define OX820_SYS_CTRL_RST_PCIEPHY 14 +#define OX820_SYS_CTRL_RST_STATIC 15 +#define OX820_SYS_CTRL_RST_GPIO 16 +#define OX820_SYS_CTRL_RST_UART1 17 +#define OX820_SYS_CTRL_RST_UART2 18 +#define OX820_SYS_CTRL_RST_MISC 19 +#define OX820_SYS_CTRL_RST_I2S 20 +#define OX820_SYS_CTRL_RST_SD 21 +#define OX820_SYS_CTRL_RST_MACB 22 +#define OX820_SYS_CTRL_RST_PCIEB 23 +#define OX820_SYS_CTRL_RST_VIDEO 24 +#define OX820_SYS_CTRL_RST_DDR_PHY 25 +#define OX820_SYS_CTRL_RST_USBHSPHYB 26 +#define OX820_SYS_CTRL_RST_USBDEV 27 +#define OX820_SYS_CTRL_RST_ARMDBG 29 +#define OX820_SYS_CTRL_RST_PLLA 30 +#define OX820_SYS_CTRL_RST_PLLB 31 + +/* bit numbers of clock control register */ +#define OX820_SYS_CTRL_CLK_COPRO 0 +#define OX820_SYS_CTRL_CLK_DMA 1 +#define OX820_SYS_CTRL_CLK_CIPHER 2 +#define OX820_SYS_CTRL_CLK_SD 3 +#define OX820_SYS_CTRL_CLK_SATA 4 +#define OX820_SYS_CTRL_CLK_I2S 5 +#define OX820_SYS_CTRL_CLK_USBHS 6 +#define OX820_SYS_CTRL_CLK_MACA 7 +#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA +#define OX820_SYS_CTRL_CLK_PCIEA 8 +#define OX820_SYS_CTRL_CLK_STATIC 9 +#define OX820_SYS_CTRL_CLK_MACB 10 +#define OX820_SYS_CTRL_CLK_PCIEB 11 +#define OX820_SYS_CTRL_CLK_REF600 12 +#define OX820_SYS_CTRL_CLK_USBDEV 13 +#define OX820_SYS_CTRL_CLK_DDR 14 +#define OX820_SYS_CTRL_CLK_DDRPHY 15 +#define OX820_SYS_CTRL_CLK_DDRCK 16 + +/* Regmap offsets */ +#define OX820_CLK_SET_REGOFFSET 0x2c +#define OX820_CLK_CLR_REGOFFSET 0x30 +#define OX820_RST_SET_REGOFFSET 0x34 +#define OX820_RST_CLR_REGOFFSET 0x38 +#define OX820_SECONDARY_SEL_REGOFFSET 0x14 +#define OX820_TERTIARY_SEL_REGOFFSET 0x8c +#define OX820_QUATERNARY_SEL_REGOFFSET 0x94 +#define OX820_DEBUG_SEL_REGOFFSET 0x9c +#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4 +#define OX820_PULLUP_SEL_REGOFFSET 0xac +#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014 +#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c +#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094 +#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c +#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4 +#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac + +struct oxnas_restart_context { + struct regmap *sys_ctrl; + struct notifier_block restart_handler; +}; + +static int ox820_restart_handle(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + struct oxnas_restart_context *ctx = container_of(this, struct + oxnas_restart_context, + restart_handler); + u32 value; + + /* + * Assert reset to cores as per power on defaults + * Don't touch the DDR interface as things will come to an impromptu + * stop NB Possibly should be asserting reset for PLLB, but there are + * timing concerns here according to the docs + */ + value = BIT(OX820_SYS_CTRL_RST_COPRO) | + BIT(OX820_SYS_CTRL_RST_USBHS) | + BIT(OX820_SYS_CTRL_RST_USBHSPHYA) | + BIT(OX820_SYS_CTRL_RST_MACA) | + BIT(OX820_SYS_CTRL_RST_PCIEA) | + BIT(OX820_SYS_CTRL_RST_SGDMA) | + BIT(OX820_SYS_CTRL_RST_CIPHER) | + BIT(OX820_SYS_CTRL_RST_SATA) | + BIT(OX820_SYS_CTRL_RST_SATA_LINK) | + BIT(OX820_SYS_CTRL_RST_SATA_PHY) | + BIT(OX820_SYS_CTRL_RST_PCIEPHY) | + BIT(OX820_SYS_CTRL_RST_STATIC) | + BIT(OX820_SYS_CTRL_RST_UART1) | + BIT(OX820_SYS_CTRL_RST_UART2) | + BIT(OX820_SYS_CTRL_RST_MISC) | + BIT(OX820_SYS_CTRL_RST_I2S) | + BIT(OX820_SYS_CTRL_RST_SD) | + BIT(OX820_SYS_CTRL_RST_MACB) | + BIT(OX820_SYS_CTRL_RST_PCIEB) | + BIT(OX820_SYS_CTRL_RST_VIDEO) | + BIT(OX820_SYS_CTRL_RST_USBHSPHYB) | + BIT(OX820_SYS_CTRL_RST_USBDEV); + + regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value); + + /* Release reset to cores as per power on defaults */ + regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET, + BIT(OX820_SYS_CTRL_RST_GPIO)); + + /* + * Disable clocks to cores as per power-on defaults - must leave DDR + * related clocks enabled otherwise we'll stop rather abruptly. + */ + value = BIT(OX820_SYS_CTRL_CLK_COPRO) | + BIT(OX820_SYS_CTRL_CLK_DMA) | + BIT(OX820_SYS_CTRL_CLK_CIPHER) | + BIT(OX820_SYS_CTRL_CLK_SD) | + BIT(OX820_SYS_CTRL_CLK_SATA) | + BIT(OX820_SYS_CTRL_CLK_I2S) | + BIT(OX820_SYS_CTRL_CLK_USBHS) | + BIT(OX820_SYS_CTRL_CLK_MAC) | + BIT(OX820_SYS_CTRL_CLK_PCIEA) | + BIT(OX820_SYS_CTRL_CLK_STATIC) | + BIT(OX820_SYS_CTRL_CLK_MACB) | + BIT(OX820_SYS_CTRL_CLK_PCIEB) | + BIT(OX820_SYS_CTRL_CLK_REF600) | + BIT(OX820_SYS_CTRL_CLK_USBDEV); + + regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value); + + /* Enable clocks to cores as per power-on defaults */ + + /* Set sys-control pin mux'ing as per power-on defaults */ + regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0); + + regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0); + + /* + * No need to save any state, as the ROM loader can determine whether + * reset is due to power cycling or programatic action, just hit the + * (self-clearing) CPU reset bit of the block reset register + */ + value = + BIT(OX820_SYS_CTRL_RST_SCU) | + BIT(OX820_SYS_CTRL_RST_ARM0) | + BIT(OX820_SYS_CTRL_RST_ARM1); + + regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value); + + pr_emerg("Unable to restart system\n"); + return NOTIFY_DONE; +} + +static int ox820_restart_probe(struct platform_device *pdev) +{ + struct oxnas_restart_context *ctx; + struct regmap *sys_ctrl; + struct device *dev = &pdev->dev; + int err = 0; + + sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node); + if (IS_ERR(sys_ctrl)) + return PTR_ERR(sys_ctrl); + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->sys_ctrl = sys_ctrl; + ctx->restart_handler.notifier_call = ox820_restart_handle; + ctx->restart_handler.priority = 192; + err = register_restart_handler(&ctx->restart_handler); + if (err) + dev_err(dev, "can't register restart notifier (err=%d)\n", err); + + return err; +} + +static const struct of_device_id ox820_restart_of_match[] = { + { .compatible = "oxsemi,ox820-sys-ctrl" }, + {} +}; + +static struct platform_driver ox820_restart_driver = { + .probe = ox820_restart_probe, + .driver = { + .name = "ox820-chip-reset", + .of_match_table = ox820_restart_of_match, + }, +}; +builtin_platform_driver(ox820_restart_driver); -- cgit v1.2.3