From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/power/supply/gpio-charger.c | 400 ++++++++++++++++++++++++++++++++++++ 1 file changed, 400 insertions(+) create mode 100644 drivers/power/supply/gpio-charger.c (limited to 'drivers/power/supply/gpio-charger.c') diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c new file mode 100644 index 000000000..68212b397 --- /dev/null +++ b/drivers/power/supply/gpio-charger.c @@ -0,0 +1,400 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2010, Lars-Peter Clausen + * Driver for chargers which report their online status through a GPIO pin + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +struct gpio_mapping { + u32 limit_ua; + u32 gpiodata; +} __packed; + +struct gpio_charger { + struct device *dev; + unsigned int irq; + unsigned int charge_status_irq; + bool wakeup_enabled; + + struct power_supply *charger; + struct power_supply_desc charger_desc; + struct gpio_desc *gpiod; + struct gpio_desc *charge_status; + + struct gpio_descs *current_limit_gpios; + struct gpio_mapping *current_limit_map; + u32 current_limit_map_size; + u32 charge_current_limit; +}; + +static irqreturn_t gpio_charger_irq(int irq, void *devid) +{ + struct power_supply *charger = devid; + + power_supply_changed(charger); + + return IRQ_HANDLED; +} + +static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy) +{ + return power_supply_get_drvdata(psy); +} + +static int set_charge_current_limit(struct gpio_charger *gpio_charger, int val) +{ + struct gpio_mapping mapping; + int ndescs = gpio_charger->current_limit_gpios->ndescs; + struct gpio_desc **gpios = gpio_charger->current_limit_gpios->desc; + int i; + + if (!gpio_charger->current_limit_map_size) + return -EINVAL; + + for (i = 0; i < gpio_charger->current_limit_map_size; i++) { + if (gpio_charger->current_limit_map[i].limit_ua <= val) + break; + } + mapping = gpio_charger->current_limit_map[i]; + + for (i = 0; i < ndescs; i++) { + bool val = (mapping.gpiodata >> i) & 1; + gpiod_set_value_cansleep(gpios[ndescs-i-1], val); + } + + gpio_charger->charge_current_limit = mapping.limit_ua; + + dev_dbg(gpio_charger->dev, "set charge current limit to %d (requested: %d)\n", + gpio_charger->charge_current_limit, val); + + return 0; +} + +static int gpio_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, union power_supply_propval *val) +{ + struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod); + break; + case POWER_SUPPLY_PROP_STATUS: + if (gpiod_get_value_cansleep(gpio_charger->charge_status)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + val->intval = gpio_charger->charge_current_limit; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int gpio_charger_set_property(struct power_supply *psy, + enum power_supply_property psp, const union power_supply_propval *val) +{ + struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + return set_charge_current_limit(gpio_charger, val->intval); + default: + return -EINVAL; + } + + return 0; +} + +static int gpio_charger_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + return 1; + default: + break; + } + + return 0; +} + +static enum power_supply_type gpio_charger_get_type(struct device *dev) +{ + const char *chargetype; + + if (!device_property_read_string(dev, "charger-type", &chargetype)) { + if (!strcmp("unknown", chargetype)) + return POWER_SUPPLY_TYPE_UNKNOWN; + if (!strcmp("battery", chargetype)) + return POWER_SUPPLY_TYPE_BATTERY; + if (!strcmp("ups", chargetype)) + return POWER_SUPPLY_TYPE_UPS; + if (!strcmp("mains", chargetype)) + return POWER_SUPPLY_TYPE_MAINS; + if (!strcmp("usb-sdp", chargetype)) + return POWER_SUPPLY_TYPE_USB; + if (!strcmp("usb-dcp", chargetype)) + return POWER_SUPPLY_TYPE_USB; + if (!strcmp("usb-cdp", chargetype)) + return POWER_SUPPLY_TYPE_USB; + if (!strcmp("usb-aca", chargetype)) + return POWER_SUPPLY_TYPE_USB; + } + dev_warn(dev, "unknown charger type %s\n", chargetype); + + return POWER_SUPPLY_TYPE_UNKNOWN; +} + +static int gpio_charger_get_irq(struct device *dev, void *dev_id, + struct gpio_desc *gpio) +{ + int ret, irq = gpiod_to_irq(gpio); + + if (irq > 0) { + ret = devm_request_any_context_irq(dev, irq, gpio_charger_irq, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + dev_name(dev), + dev_id); + if (ret < 0) { + dev_warn(dev, "Failed to request irq: %d\n", ret); + irq = 0; + } + } + + return irq; +} + +static int init_charge_current_limit(struct device *dev, + struct gpio_charger *gpio_charger) +{ + int i, len; + u32 cur_limit = U32_MAX; + + gpio_charger->current_limit_gpios = devm_gpiod_get_array_optional(dev, + "charge-current-limit", GPIOD_OUT_LOW); + if (IS_ERR(gpio_charger->current_limit_gpios)) { + dev_err(dev, "error getting current-limit GPIOs\n"); + return PTR_ERR(gpio_charger->current_limit_gpios); + } + + if (!gpio_charger->current_limit_gpios) + return 0; + + len = device_property_read_u32_array(dev, "charge-current-limit-mapping", + NULL, 0); + if (len < 0) + return len; + + if (len == 0 || len % 2) { + dev_err(dev, "invalid charge-current-limit-mapping length\n"); + return -EINVAL; + } + + gpio_charger->current_limit_map = devm_kmalloc_array(dev, + len / 2, sizeof(*gpio_charger->current_limit_map), GFP_KERNEL); + if (!gpio_charger->current_limit_map) + return -ENOMEM; + + gpio_charger->current_limit_map_size = len / 2; + + len = device_property_read_u32_array(dev, "charge-current-limit-mapping", + (u32*) gpio_charger->current_limit_map, len); + if (len < 0) + return len; + + for (i=0; i < gpio_charger->current_limit_map_size; i++) { + if (gpio_charger->current_limit_map[i].limit_ua > cur_limit) { + dev_err(dev, "charge-current-limit-mapping not sorted by current in descending order\n"); + return -EINVAL; + } + + cur_limit = gpio_charger->current_limit_map[i].limit_ua; + } + + /* default to smallest current limitation for safety reasons */ + len = gpio_charger->current_limit_map_size - 1; + set_charge_current_limit(gpio_charger, + gpio_charger->current_limit_map[len].limit_ua); + + return 0; +} + +/* + * The entries will be overwritten by driver's probe routine depending + * on the available features. This list ensures, that the array is big + * enough for all optional features. + */ +static enum power_supply_property gpio_charger_properties[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, +}; + +static int gpio_charger_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct gpio_charger_platform_data *pdata = dev->platform_data; + struct power_supply_config psy_cfg = {}; + struct gpio_charger *gpio_charger; + struct power_supply_desc *charger_desc; + struct gpio_desc *charge_status; + int charge_status_irq; + int ret; + int num_props = 0; + + if (!pdata && !dev->of_node) { + dev_err(dev, "No platform data\n"); + return -ENOENT; + } + + gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL); + if (!gpio_charger) + return -ENOMEM; + gpio_charger->dev = dev; + + /* + * This will fetch a GPIO descriptor from device tree, ACPI or + * boardfile descriptor tables. It's good to try this first. + */ + gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN); + if (IS_ERR(gpio_charger->gpiod)) { + /* Just try again if this happens */ + return dev_err_probe(dev, PTR_ERR(gpio_charger->gpiod), + "error getting GPIO descriptor\n"); + } + + if (gpio_charger->gpiod) { + gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE; + num_props++; + } + + charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN); + if (IS_ERR(charge_status)) + return PTR_ERR(charge_status); + if (charge_status) { + gpio_charger->charge_status = charge_status; + gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS; + num_props++; + } + + ret = init_charge_current_limit(dev, gpio_charger); + if (ret < 0) + return ret; + if (gpio_charger->current_limit_map) { + gpio_charger_properties[num_props] = + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; + num_props++; + } + + charger_desc = &gpio_charger->charger_desc; + charger_desc->properties = gpio_charger_properties; + charger_desc->num_properties = num_props; + charger_desc->get_property = gpio_charger_get_property; + charger_desc->set_property = gpio_charger_set_property; + charger_desc->property_is_writeable = + gpio_charger_property_is_writeable; + + psy_cfg.of_node = dev->of_node; + psy_cfg.drv_data = gpio_charger; + + if (pdata) { + charger_desc->name = pdata->name; + charger_desc->type = pdata->type; + psy_cfg.supplied_to = pdata->supplied_to; + psy_cfg.num_supplicants = pdata->num_supplicants; + } else { + charger_desc->name = dev->of_node->name; + charger_desc->type = gpio_charger_get_type(dev); + } + + if (!charger_desc->name) + charger_desc->name = pdev->name; + + gpio_charger->charger = devm_power_supply_register(dev, charger_desc, + &psy_cfg); + if (IS_ERR(gpio_charger->charger)) { + ret = PTR_ERR(gpio_charger->charger); + dev_err(dev, "Failed to register power supply: %d\n", ret); + return ret; + } + + gpio_charger->irq = gpio_charger_get_irq(dev, gpio_charger->charger, + gpio_charger->gpiod); + + charge_status_irq = gpio_charger_get_irq(dev, gpio_charger->charger, + gpio_charger->charge_status); + gpio_charger->charge_status_irq = charge_status_irq; + + platform_set_drvdata(pdev, gpio_charger); + + device_init_wakeup(dev, 1); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int gpio_charger_suspend(struct device *dev) +{ + struct gpio_charger *gpio_charger = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + gpio_charger->wakeup_enabled = + !enable_irq_wake(gpio_charger->irq); + + return 0; +} + +static int gpio_charger_resume(struct device *dev) +{ + struct gpio_charger *gpio_charger = dev_get_drvdata(dev); + + if (device_may_wakeup(dev) && gpio_charger->wakeup_enabled) + disable_irq_wake(gpio_charger->irq); + power_supply_changed(gpio_charger->charger); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops, + gpio_charger_suspend, gpio_charger_resume); + +static const struct of_device_id gpio_charger_match[] = { + { .compatible = "gpio-charger" }, + { } +}; +MODULE_DEVICE_TABLE(of, gpio_charger_match); + +static struct platform_driver gpio_charger_driver = { + .probe = gpio_charger_probe, + .driver = { + .name = "gpio-charger", + .pm = &gpio_charger_pm_ops, + .of_match_table = gpio_charger_match, + }, +}; + +module_platform_driver(gpio_charger_driver); + +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-charger"); -- cgit v1.2.3