From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/power/supply/max8903_charger.c | 423 +++++++++++++++++++++++++++++++++ 1 file changed, 423 insertions(+) create mode 100644 drivers/power/supply/max8903_charger.c (limited to 'drivers/power/supply/max8903_charger.c') diff --git a/drivers/power/supply/max8903_charger.c b/drivers/power/supply/max8903_charger.c new file mode 100644 index 000000000..54d50b55f --- /dev/null +++ b/drivers/power/supply/max8903_charger.c @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct max8903_data { + struct device *dev; + struct power_supply *psy; + struct power_supply_desc psy_desc; + /* + * GPIOs + * chg, flt, dcm and usus are optional. + * dok or uok must be present. + * If dok is present, cen must be present. + */ + struct gpio_desc *cen; /* Charger Enable input */ + struct gpio_desc *dok; /* DC (Adapter) Power OK output */ + struct gpio_desc *uok; /* USB Power OK output */ + struct gpio_desc *chg; /* Charger status output */ + struct gpio_desc *flt; /* Fault output */ + struct gpio_desc *dcm; /* Current-Limit Mode input (1: DC, 2: USB) */ + struct gpio_desc *usus; /* USB Suspend Input (1: suspended) */ + bool fault; + bool usb_in; + bool ta_in; +}; + +static enum power_supply_property max8903_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, /* Charger status output */ + POWER_SUPPLY_PROP_ONLINE, /* External power source */ + POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */ +}; + +static int max8903_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max8903_data *data = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + if (data->chg) { + if (gpiod_get_value(data->chg)) + /* CHG asserted */ + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (data->usb_in || data->ta_in) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + } + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = 0; + if (data->usb_in || data->ta_in) + val->intval = 1; + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + if (data->fault) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + default: + return -EINVAL; + } + + return 0; +} + +static irqreturn_t max8903_dcin(int irq, void *_data) +{ + struct max8903_data *data = _data; + bool ta_in; + enum power_supply_type old_type; + + /* + * This means the line is asserted. + * + * The signal is active low, but the inversion is handled in the GPIO + * library as the line should be flagged GPIO_ACTIVE_LOW in the device + * tree. + */ + ta_in = gpiod_get_value(data->dok); + + if (ta_in == data->ta_in) + return IRQ_HANDLED; + + data->ta_in = ta_in; + + /* Set Current-Limit-Mode 1:DC 0:USB */ + if (data->dcm) + gpiod_set_value(data->dcm, ta_in); + + /* Charger Enable / Disable */ + if (data->cen) { + int val; + + if (ta_in) + /* Certainly enable if DOK is asserted */ + val = 1; + else if (data->usb_in) + /* Enable if the USB charger is enabled */ + val = 1; + else + /* Else default-disable */ + val = 0; + + gpiod_set_value(data->cen, val); + } + + dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ? + "Connected" : "Disconnected"); + + old_type = data->psy_desc.type; + + if (data->ta_in) + data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS; + else if (data->usb_in) + data->psy_desc.type = POWER_SUPPLY_TYPE_USB; + else + data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY; + + if (old_type != data->psy_desc.type) + power_supply_changed(data->psy); + + return IRQ_HANDLED; +} + +static irqreturn_t max8903_usbin(int irq, void *_data) +{ + struct max8903_data *data = _data; + bool usb_in; + enum power_supply_type old_type; + + /* + * This means the line is asserted. + * + * The signal is active low, but the inversion is handled in the GPIO + * library as the line should be flagged GPIO_ACTIVE_LOW in the device + * tree. + */ + usb_in = gpiod_get_value(data->uok); + + if (usb_in == data->usb_in) + return IRQ_HANDLED; + + data->usb_in = usb_in; + + /* Do not touch Current-Limit-Mode */ + + /* Charger Enable / Disable */ + if (data->cen) { + int val; + + if (usb_in) + /* Certainly enable if UOK is asserted */ + val = 1; + else if (data->ta_in) + /* Enable if the DC charger is enabled */ + val = 1; + else + /* Else default-disable */ + val = 0; + + gpiod_set_value(data->cen, val); + } + + dev_dbg(data->dev, "USB Charger %s.\n", usb_in ? + "Connected" : "Disconnected"); + + old_type = data->psy_desc.type; + + if (data->ta_in) + data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS; + else if (data->usb_in) + data->psy_desc.type = POWER_SUPPLY_TYPE_USB; + else + data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY; + + if (old_type != data->psy_desc.type) + power_supply_changed(data->psy); + + return IRQ_HANDLED; +} + +static irqreturn_t max8903_fault(int irq, void *_data) +{ + struct max8903_data *data = _data; + bool fault; + + /* + * This means the line is asserted. + * + * The signal is active low, but the inversion is handled in the GPIO + * library as the line should be flagged GPIO_ACTIVE_LOW in the device + * tree. + */ + fault = gpiod_get_value(data->flt); + + if (fault == data->fault) + return IRQ_HANDLED; + + data->fault = fault; + + if (fault) + dev_err(data->dev, "Charger suffers a fault and stops.\n"); + else + dev_err(data->dev, "Charger recovered from a fault.\n"); + + return IRQ_HANDLED; +} + +static int max8903_setup_gpios(struct platform_device *pdev) +{ + struct max8903_data *data = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + bool ta_in = false; + bool usb_in = false; + enum gpiod_flags flags; + + data->dok = devm_gpiod_get_optional(dev, "dok", GPIOD_IN); + if (IS_ERR(data->dok)) + return dev_err_probe(dev, PTR_ERR(data->dok), + "failed to get DOK GPIO"); + if (data->dok) { + gpiod_set_consumer_name(data->dok, data->psy_desc.name); + /* + * The DC OK is pulled up to 1 and goes low when a charger + * is plugged in (active low) but in the device tree the + * line is marked as GPIO_ACTIVE_LOW so we get a 1 (asserted) + * here if the DC charger is plugged in. + */ + ta_in = gpiod_get_value(data->dok); + } + + data->uok = devm_gpiod_get_optional(dev, "uok", GPIOD_IN); + if (IS_ERR(data->uok)) + return dev_err_probe(dev, PTR_ERR(data->uok), + "failed to get UOK GPIO"); + if (data->uok) { + gpiod_set_consumer_name(data->uok, data->psy_desc.name); + /* + * The USB OK is pulled up to 1 and goes low when a USB charger + * is plugged in (active low) but in the device tree the + * line is marked as GPIO_ACTIVE_LOW so we get a 1 (asserted) + * here if the USB charger is plugged in. + */ + usb_in = gpiod_get_value(data->uok); + } + + /* Either DC OK or USB OK must be provided */ + if (!data->dok && !data->uok) { + dev_err(dev, "no valid power source\n"); + return -EINVAL; + } + + /* + * If either charger is already connected at this point, + * assert the CEN line and enable charging from the start. + * + * The line is active low but also marked with GPIO_ACTIVE_LOW + * in the device tree, so when we assert the line with + * GPIOD_OUT_HIGH the line will be driven low. + */ + flags = (ta_in || usb_in) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + /* + * If DC OK is provided, Charger Enable CEN is compulsory + * so this is not optional here. + */ + data->cen = devm_gpiod_get(dev, "cen", flags); + if (IS_ERR(data->cen)) + return dev_err_probe(dev, PTR_ERR(data->cen), + "failed to get CEN GPIO"); + gpiod_set_consumer_name(data->cen, data->psy_desc.name); + + /* + * If the DC charger is connected, then select it. + * + * The DCM line should be marked GPIO_ACTIVE_HIGH in the + * device tree. Driving it high will enable the DC charger + * input over the USB charger input. + */ + flags = ta_in ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + data->dcm = devm_gpiod_get_optional(dev, "dcm", flags); + if (IS_ERR(data->dcm)) + return dev_err_probe(dev, PTR_ERR(data->dcm), + "failed to get DCM GPIO"); + gpiod_set_consumer_name(data->dcm, data->psy_desc.name); + + data->chg = devm_gpiod_get_optional(dev, "chg", GPIOD_IN); + if (IS_ERR(data->chg)) + return dev_err_probe(dev, PTR_ERR(data->chg), + "failed to get CHG GPIO"); + gpiod_set_consumer_name(data->chg, data->psy_desc.name); + + data->flt = devm_gpiod_get_optional(dev, "flt", GPIOD_IN); + if (IS_ERR(data->flt)) + return dev_err_probe(dev, PTR_ERR(data->flt), + "failed to get FLT GPIO"); + gpiod_set_consumer_name(data->flt, data->psy_desc.name); + + data->usus = devm_gpiod_get_optional(dev, "usus", GPIOD_IN); + if (IS_ERR(data->usus)) + return dev_err_probe(dev, PTR_ERR(data->usus), + "failed to get USUS GPIO"); + gpiod_set_consumer_name(data->usus, data->psy_desc.name); + + data->fault = false; + data->ta_in = ta_in; + data->usb_in = usb_in; + + return 0; +} + +static int max8903_probe(struct platform_device *pdev) +{ + struct max8903_data *data; + struct device *dev = &pdev->dev; + struct power_supply_config psy_cfg = {}; + int ret = 0; + + data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->dev = dev; + platform_set_drvdata(pdev, data); + + ret = max8903_setup_gpios(pdev); + if (ret) + return ret; + + data->psy_desc.name = "max8903_charger"; + data->psy_desc.type = (data->ta_in) ? POWER_SUPPLY_TYPE_MAINS : + ((data->usb_in) ? POWER_SUPPLY_TYPE_USB : + POWER_SUPPLY_TYPE_BATTERY); + data->psy_desc.get_property = max8903_get_property; + data->psy_desc.properties = max8903_charger_props; + data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props); + + psy_cfg.of_node = dev->of_node; + psy_cfg.drv_data = data; + + data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg); + if (IS_ERR(data->psy)) { + dev_err(dev, "failed: power supply register.\n"); + return PTR_ERR(data->psy); + } + + if (data->dok) { + ret = devm_request_threaded_irq(dev, gpiod_to_irq(data->dok), + NULL, max8903_dcin, + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "MAX8903 DC IN", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for DC (%d)\n", + gpiod_to_irq(data->dok), ret); + return ret; + } + } + + if (data->uok) { + ret = devm_request_threaded_irq(dev, gpiod_to_irq(data->uok), + NULL, max8903_usbin, + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "MAX8903 USB IN", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for USB (%d)\n", + gpiod_to_irq(data->uok), ret); + return ret; + } + } + + if (data->flt) { + ret = devm_request_threaded_irq(dev, gpiod_to_irq(data->flt), + NULL, max8903_fault, + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "MAX8903 Fault", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for Fault (%d)\n", + gpiod_to_irq(data->flt), ret); + return ret; + } + } + + return 0; +} + +static const struct of_device_id max8903_match_ids[] = { + { .compatible = "maxim,max8903", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, max8903_match_ids); + +static struct platform_driver max8903_driver = { + .probe = max8903_probe, + .driver = { + .name = "max8903-charger", + .of_match_table = max8903_match_ids + }, +}; + +module_platform_driver(max8903_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MAX8903 Charger Driver"); +MODULE_AUTHOR("MyungJoo Ham "); +MODULE_ALIAS("platform:max8903-charger"); -- cgit v1.2.3