From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pps/clients/pps-gpio.c | 255 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 255 insertions(+) create mode 100644 drivers/pps/clients/pps-gpio.c (limited to 'drivers/pps/clients/pps-gpio.c') diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c new file mode 100644 index 000000000..2f4b11b4d --- /dev/null +++ b/drivers/pps/clients/pps-gpio.c @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * pps-gpio.c -- PPS client driver using GPIO + * + * Copyright (C) 2010 Ricardo Martins + * Copyright (C) 2011 James Nuss + */ + +#define PPS_GPIO_NAME "pps-gpio" +#define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Info for each registered platform device */ +struct pps_gpio_device_data { + int irq; /* IRQ used as PPS source */ + struct pps_device *pps; /* PPS source device */ + struct pps_source_info info; /* PPS source information */ + struct gpio_desc *gpio_pin; /* GPIO port descriptors */ + struct gpio_desc *echo_pin; + struct timer_list echo_timer; /* timer to reset echo active state */ + bool assert_falling_edge; + bool capture_clear; + unsigned int echo_active_ms; /* PPS echo active duration */ + unsigned long echo_timeout; /* timer timeout value in jiffies */ +}; + +/* + * Report the PPS event + */ + +static irqreturn_t pps_gpio_irq_handler(int irq, void *data) +{ + const struct pps_gpio_device_data *info; + struct pps_event_time ts; + int rising_edge; + + /* Get the time stamp first */ + pps_get_ts(&ts); + + info = data; + + rising_edge = gpiod_get_value(info->gpio_pin); + if ((rising_edge && !info->assert_falling_edge) || + (!rising_edge && info->assert_falling_edge)) + pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data); + else if (info->capture_clear && + ((rising_edge && info->assert_falling_edge) || + (!rising_edge && !info->assert_falling_edge))) + pps_event(info->pps, &ts, PPS_CAPTURECLEAR, data); + + return IRQ_HANDLED; +} + +/* This function will only be called when an ECHO GPIO is defined */ +static void pps_gpio_echo(struct pps_device *pps, int event, void *data) +{ + /* add_timer() needs to write into info->echo_timer */ + struct pps_gpio_device_data *info = data; + + switch (event) { + case PPS_CAPTUREASSERT: + if (pps->params.mode & PPS_ECHOASSERT) + gpiod_set_value(info->echo_pin, 1); + break; + + case PPS_CAPTURECLEAR: + if (pps->params.mode & PPS_ECHOCLEAR) + gpiod_set_value(info->echo_pin, 1); + break; + } + + /* fire the timer */ + if (info->pps->params.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) { + info->echo_timer.expires = jiffies + info->echo_timeout; + add_timer(&info->echo_timer); + } +} + +/* Timer callback to reset the echo pin to the inactive state */ +static void pps_gpio_echo_timer_callback(struct timer_list *t) +{ + const struct pps_gpio_device_data *info; + + info = from_timer(info, t, echo_timer); + + gpiod_set_value(info->echo_pin, 0); +} + +static int pps_gpio_setup(struct device *dev) +{ + struct pps_gpio_device_data *data = dev_get_drvdata(dev); + int ret; + u32 value; + + data->gpio_pin = devm_gpiod_get(dev, NULL, GPIOD_IN); + if (IS_ERR(data->gpio_pin)) + return dev_err_probe(dev, PTR_ERR(data->gpio_pin), + "failed to request PPS GPIO\n"); + + data->assert_falling_edge = + device_property_read_bool(dev, "assert-falling-edge"); + + data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW); + if (IS_ERR(data->echo_pin)) + return dev_err_probe(dev, PTR_ERR(data->echo_pin), + "failed to request ECHO GPIO\n"); + + if (!data->echo_pin) + return 0; + + ret = device_property_read_u32(dev, "echo-active-ms", &value); + if (ret) { + dev_err(dev, "failed to get echo-active-ms from FW\n"); + return ret; + } + + /* sanity check on echo_active_ms */ + if (!value || value > 999) { + dev_err(dev, "echo-active-ms: %u - bad value from FW\n", value); + return -EINVAL; + } + + data->echo_active_ms = value; + + return 0; +} + +static unsigned long +get_irqf_trigger_flags(const struct pps_gpio_device_data *data) +{ + unsigned long flags = data->assert_falling_edge ? + IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; + + if (data->capture_clear) { + flags |= ((flags & IRQF_TRIGGER_RISING) ? + IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING); + } + + return flags; +} + +static int pps_gpio_probe(struct platform_device *pdev) +{ + struct pps_gpio_device_data *data; + struct device *dev = &pdev->dev; + int ret; + int pps_default_params; + + /* allocate space for device info */ + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + dev_set_drvdata(dev, data); + + /* GPIO setup */ + ret = pps_gpio_setup(dev); + if (ret) + return ret; + + /* IRQ setup */ + ret = gpiod_to_irq(data->gpio_pin); + if (ret < 0) { + dev_err(dev, "failed to map GPIO to IRQ: %d\n", ret); + return -EINVAL; + } + data->irq = ret; + + /* initialize PPS specific parts of the bookkeeping data structure. */ + data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | + PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC; + if (data->capture_clear) + data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR | + PPS_ECHOCLEAR; + data->info.owner = THIS_MODULE; + snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d", + pdev->name, pdev->id); + if (data->echo_pin) { + data->info.echo = pps_gpio_echo; + data->echo_timeout = msecs_to_jiffies(data->echo_active_ms); + timer_setup(&data->echo_timer, pps_gpio_echo_timer_callback, 0); + } + + /* register PPS source */ + pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT; + if (data->capture_clear) + pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR; + data->pps = pps_register_source(&data->info, pps_default_params); + if (IS_ERR(data->pps)) { + dev_err(dev, "failed to register IRQ %d as PPS source\n", + data->irq); + return PTR_ERR(data->pps); + } + + /* register IRQ interrupt handler */ + ret = devm_request_irq(dev, data->irq, pps_gpio_irq_handler, + get_irqf_trigger_flags(data), data->info.name, data); + if (ret) { + pps_unregister_source(data->pps); + dev_err(dev, "failed to acquire IRQ %d\n", data->irq); + return -EINVAL; + } + + dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n", + data->irq); + + return 0; +} + +static int pps_gpio_remove(struct platform_device *pdev) +{ + struct pps_gpio_device_data *data = platform_get_drvdata(pdev); + + pps_unregister_source(data->pps); + del_timer_sync(&data->echo_timer); + /* reset echo pin in any case */ + gpiod_set_value(data->echo_pin, 0); + dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq); + return 0; +} + +static const struct of_device_id pps_gpio_dt_ids[] = { + { .compatible = "pps-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids); + +static struct platform_driver pps_gpio_driver = { + .probe = pps_gpio_probe, + .remove = pps_gpio_remove, + .driver = { + .name = PPS_GPIO_NAME, + .of_match_table = pps_gpio_dt_ids, + }, +}; + +module_platform_driver(pps_gpio_driver); +MODULE_AUTHOR("Ricardo Martins "); +MODULE_AUTHOR("James Nuss "); +MODULE_DESCRIPTION("Use GPIO pin as PPS source"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.2.0"); -- cgit v1.2.3