From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pps/clients/pps_parport.c | 225 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 drivers/pps/clients/pps_parport.c (limited to 'drivers/pps/clients/pps_parport.c') diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c new file mode 100644 index 000000000..42f93d4c6 --- /dev/null +++ b/drivers/pps/clients/pps_parport.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * pps_parport.c -- kernel parallel port PPS client + * + * Copyright (C) 2009 Alexander Gordeev + */ + + +/* + * TODO: + * implement echo over SEL pin + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +/* module parameters */ + +#define CLEAR_WAIT_MAX 100 +#define CLEAR_WAIT_MAX_ERRORS 5 + +static unsigned int clear_wait = 100; +MODULE_PARM_DESC(clear_wait, + "Maximum number of port reads when polling for signal clear," + " zero turns clear edge capture off entirely"); +module_param(clear_wait, uint, 0); + +static DEFINE_IDA(pps_client_index); + +/* internal per port structure */ +struct pps_client_pp { + struct pardevice *pardev; /* parport device */ + struct pps_device *pps; /* PPS device */ + unsigned int cw; /* port clear timeout */ + unsigned int cw_err; /* number of timeouts */ + int index; /* device number */ +}; + +static inline int signal_is_set(struct parport *port) +{ + return (port->ops->read_status(port) & PARPORT_STATUS_ACK) != 0; +} + +/* parport interrupt handler */ +static void parport_irq(void *handle) +{ + struct pps_event_time ts_assert, ts_clear; + struct pps_client_pp *dev = handle; + struct parport *port = dev->pardev->port; + unsigned int i; + unsigned long flags; + + /* first of all we get the time stamp... */ + pps_get_ts(&ts_assert); + + if (dev->cw == 0) + /* clear edge capture disabled */ + goto out_assert; + + /* try capture the clear edge */ + + /* We have to disable interrupts here. The idea is to prevent + * other interrupts on the same processor to introduce random + * lags while polling the port. Reading from IO port is known + * to take approximately 1us while other interrupt handlers can + * take much more potentially. + * + * Interrupts won't be disabled for a long time because the + * number of polls is limited by clear_wait parameter which is + * kept rather low. So it should never be an issue. + */ + local_irq_save(flags); + /* check the signal (no signal means the pulse is lost this time) */ + if (!signal_is_set(port)) { + local_irq_restore(flags); + dev_err(dev->pps->dev, "lost the signal\n"); + goto out_assert; + } + + /* poll the port until the signal is unset */ + for (i = dev->cw; i; i--) + if (!signal_is_set(port)) { + pps_get_ts(&ts_clear); + local_irq_restore(flags); + dev->cw_err = 0; + goto out_both; + } + local_irq_restore(flags); + + /* timeout */ + dev->cw_err++; + if (dev->cw_err >= CLEAR_WAIT_MAX_ERRORS) { + dev_err(dev->pps->dev, "disabled clear edge capture after %d" + " timeouts\n", dev->cw_err); + dev->cw = 0; + dev->cw_err = 0; + } + +out_assert: + /* fire assert event */ + pps_event(dev->pps, &ts_assert, + PPS_CAPTUREASSERT, NULL); + return; + +out_both: + /* fire assert event */ + pps_event(dev->pps, &ts_assert, + PPS_CAPTUREASSERT, NULL); + /* fire clear event */ + pps_event(dev->pps, &ts_clear, + PPS_CAPTURECLEAR, NULL); + return; +} + +static void parport_attach(struct parport *port) +{ + struct pardev_cb pps_client_cb; + int index; + struct pps_client_pp *device; + struct pps_source_info info = { + .name = KBUILD_MODNAME, + .path = "", + .mode = PPS_CAPTUREBOTH | \ + PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \ + PPS_ECHOASSERT | PPS_ECHOCLEAR | \ + PPS_CANWAIT | PPS_TSFMT_TSPEC, + .owner = THIS_MODULE, + .dev = NULL + }; + + if (clear_wait > CLEAR_WAIT_MAX) { + pr_err("clear_wait value should be not greater then %d\n", + CLEAR_WAIT_MAX); + return; + } + + device = kzalloc(sizeof(struct pps_client_pp), GFP_KERNEL); + if (!device) { + pr_err("memory allocation failed, not attaching\n"); + return; + } + + index = ida_simple_get(&pps_client_index, 0, 0, GFP_KERNEL); + memset(&pps_client_cb, 0, sizeof(pps_client_cb)); + pps_client_cb.private = device; + pps_client_cb.irq_func = parport_irq; + pps_client_cb.flags = PARPORT_FLAG_EXCL; + device->pardev = parport_register_dev_model(port, + KBUILD_MODNAME, + &pps_client_cb, + index); + if (!device->pardev) { + pr_err("couldn't register with %s\n", port->name); + goto err_free; + } + + if (parport_claim_or_block(device->pardev) < 0) { + pr_err("couldn't claim %s\n", port->name); + goto err_unregister_dev; + } + + device->pps = pps_register_source(&info, + PPS_CAPTUREBOTH | PPS_OFFSETASSERT | PPS_OFFSETCLEAR); + if (IS_ERR(device->pps)) { + pr_err("couldn't register PPS source\n"); + goto err_release_dev; + } + + device->cw = clear_wait; + + port->ops->enable_irq(port); + device->index = index; + + pr_info("attached to %s\n", port->name); + + return; + +err_release_dev: + parport_release(device->pardev); +err_unregister_dev: + parport_unregister_device(device->pardev); +err_free: + ida_simple_remove(&pps_client_index, index); + kfree(device); +} + +static void parport_detach(struct parport *port) +{ + struct pardevice *pardev = port->cad; + struct pps_client_pp *device; + + /* FIXME: oooh, this is ugly! */ + if (!pardev || strcmp(pardev->name, KBUILD_MODNAME)) + /* not our port */ + return; + + device = pardev->private; + + port->ops->disable_irq(port); + pps_unregister_source(device->pps); + parport_release(pardev); + parport_unregister_device(pardev); + ida_simple_remove(&pps_client_index, device->index); + kfree(device); +} + +static struct parport_driver pps_parport_driver = { + .name = KBUILD_MODNAME, + .match_port = parport_attach, + .detach = parport_detach, + .devmodel = true, +}; +module_parport_driver(pps_parport_driver); + +MODULE_AUTHOR("Alexander Gordeev "); +MODULE_DESCRIPTION("parallel port PPS client"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3