From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pwm/pwm-mtk-disp.c | 323 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 323 insertions(+) create mode 100644 drivers/pwm/pwm-mtk-disp.c (limited to 'drivers/pwm/pwm-mtk-disp.c') diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c new file mode 100644 index 000000000..692a06121 --- /dev/null +++ b/drivers/pwm/pwm-mtk-disp.c @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MediaTek display pulse-width-modulation controller driver. + * Copyright (c) 2015 MediaTek Inc. + * Author: YH Huang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DISP_PWM_EN 0x00 + +#define PWM_CLKDIV_SHIFT 16 +#define PWM_CLKDIV_MAX 0x3ff +#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT) + +#define PWM_PERIOD_BIT_WIDTH 12 +#define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1) + +#define PWM_HIGH_WIDTH_SHIFT 16 +#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT) + +struct mtk_pwm_data { + u32 enable_mask; + unsigned int con0; + u32 con0_sel; + unsigned int con1; + + bool has_commit; + unsigned int commit; + unsigned int commit_mask; + + unsigned int bls_debug; + u32 bls_debug_mask; +}; + +struct mtk_disp_pwm { + struct pwm_chip chip; + const struct mtk_pwm_data *data; + struct clk *clk_main; + struct clk *clk_mm; + void __iomem *base; + bool enabled; +}; + +static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip) +{ + return container_of(chip, struct mtk_disp_pwm, chip); +} + +static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset, + u32 mask, u32 data) +{ + void __iomem *address = mdp->base + offset; + u32 value; + + value = readl(address); + value &= ~mask; + value |= data; + writel(value, address); +} + +static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip); + u32 clk_div, period, high_width, value; + u64 div, rate; + int err; + + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + if (!state->enabled) { + mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask, + 0x0); + + if (mdp->enabled) { + clk_disable_unprepare(mdp->clk_mm); + clk_disable_unprepare(mdp->clk_main); + } + + mdp->enabled = false; + return 0; + } + + if (!mdp->enabled) { + err = clk_prepare_enable(mdp->clk_main); + if (err < 0) { + dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n", + ERR_PTR(err)); + return err; + } + + err = clk_prepare_enable(mdp->clk_mm); + if (err < 0) { + dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n", + ERR_PTR(err)); + clk_disable_unprepare(mdp->clk_main); + return err; + } + } + + /* + * Find period, high_width and clk_div to suit duty_ns and period_ns. + * Calculate proper div value to keep period value in the bound. + * + * period_ns = 10^9 * (clk_div + 1) * (period + 1) / PWM_CLK_RATE + * duty_ns = 10^9 * (clk_div + 1) * high_width / PWM_CLK_RATE + * + * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1 + * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1)) + */ + rate = clk_get_rate(mdp->clk_main); + clk_div = mul_u64_u64_div_u64(state->period, rate, NSEC_PER_SEC) >> + PWM_PERIOD_BIT_WIDTH; + if (clk_div > PWM_CLKDIV_MAX) { + if (!mdp->enabled) { + clk_disable_unprepare(mdp->clk_mm); + clk_disable_unprepare(mdp->clk_main); + } + return -EINVAL; + } + + div = NSEC_PER_SEC * (clk_div + 1); + period = mul_u64_u64_div_u64(state->period, rate, div); + if (period > 0) + period--; + + high_width = mul_u64_u64_div_u64(state->duty_cycle, rate, div); + value = period | (high_width << PWM_HIGH_WIDTH_SHIFT); + + mtk_disp_pwm_update_bits(mdp, mdp->data->con0, + PWM_CLKDIV_MASK, + clk_div << PWM_CLKDIV_SHIFT); + mtk_disp_pwm_update_bits(mdp, mdp->data->con1, + PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, + value); + + if (mdp->data->has_commit) { + mtk_disp_pwm_update_bits(mdp, mdp->data->commit, + mdp->data->commit_mask, + mdp->data->commit_mask); + mtk_disp_pwm_update_bits(mdp, mdp->data->commit, + mdp->data->commit_mask, + 0x0); + } else { + /* + * For MT2701, disable double buffer before writing register + * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH. + */ + mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug, + mdp->data->bls_debug_mask, + mdp->data->bls_debug_mask); + mtk_disp_pwm_update_bits(mdp, mdp->data->con0, + mdp->data->con0_sel, + mdp->data->con0_sel); + } + + mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask, + mdp->data->enable_mask); + mdp->enabled = true; + + return 0; +} + +static int mtk_disp_pwm_get_state(struct pwm_chip *chip, + struct pwm_device *pwm, + struct pwm_state *state) +{ + struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip); + u64 rate, period, high_width; + u32 clk_div, pwm_en, con0, con1; + int err; + + err = clk_prepare_enable(mdp->clk_main); + if (err < 0) { + dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n", ERR_PTR(err)); + return err; + } + + err = clk_prepare_enable(mdp->clk_mm); + if (err < 0) { + dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n", ERR_PTR(err)); + clk_disable_unprepare(mdp->clk_main); + return err; + } + + rate = clk_get_rate(mdp->clk_main); + con0 = readl(mdp->base + mdp->data->con0); + con1 = readl(mdp->base + mdp->data->con1); + pwm_en = readl(mdp->base + DISP_PWM_EN); + state->enabled = !!(pwm_en & mdp->data->enable_mask); + clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0); + period = FIELD_GET(PWM_PERIOD_MASK, con1); + /* + * period has 12 bits, clk_div 11 and NSEC_PER_SEC has 30, + * so period * (clk_div + 1) * NSEC_PER_SEC doesn't overflow. + */ + state->period = DIV64_U64_ROUND_UP(period * (clk_div + 1) * NSEC_PER_SEC, rate); + high_width = FIELD_GET(PWM_HIGH_WIDTH_MASK, con1); + state->duty_cycle = DIV64_U64_ROUND_UP(high_width * (clk_div + 1) * NSEC_PER_SEC, + rate); + state->polarity = PWM_POLARITY_NORMAL; + clk_disable_unprepare(mdp->clk_mm); + clk_disable_unprepare(mdp->clk_main); + + return 0; +} + +static const struct pwm_ops mtk_disp_pwm_ops = { + .apply = mtk_disp_pwm_apply, + .get_state = mtk_disp_pwm_get_state, + .owner = THIS_MODULE, +}; + +static int mtk_disp_pwm_probe(struct platform_device *pdev) +{ + struct mtk_disp_pwm *mdp; + int ret; + + mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL); + if (!mdp) + return -ENOMEM; + + mdp->data = of_device_get_match_data(&pdev->dev); + + mdp->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(mdp->base)) + return PTR_ERR(mdp->base); + + mdp->clk_main = devm_clk_get(&pdev->dev, "main"); + if (IS_ERR(mdp->clk_main)) + return PTR_ERR(mdp->clk_main); + + mdp->clk_mm = devm_clk_get(&pdev->dev, "mm"); + if (IS_ERR(mdp->clk_mm)) + return PTR_ERR(mdp->clk_mm); + + mdp->chip.dev = &pdev->dev; + mdp->chip.ops = &mtk_disp_pwm_ops; + mdp->chip.npwm = 1; + + ret = pwmchip_add(&mdp->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %pe\n", ERR_PTR(ret)); + return ret; + } + + platform_set_drvdata(pdev, mdp); + + return 0; +} + +static int mtk_disp_pwm_remove(struct platform_device *pdev) +{ + struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev); + + pwmchip_remove(&mdp->chip); + + return 0; +} + +static const struct mtk_pwm_data mt2701_pwm_data = { + .enable_mask = BIT(16), + .con0 = 0xa8, + .con0_sel = 0x2, + .con1 = 0xac, + .has_commit = false, + .bls_debug = 0xb0, + .bls_debug_mask = 0x3, +}; + +static const struct mtk_pwm_data mt8173_pwm_data = { + .enable_mask = BIT(0), + .con0 = 0x10, + .con0_sel = 0x0, + .con1 = 0x14, + .has_commit = true, + .commit = 0x8, + .commit_mask = 0x1, +}; + +static const struct mtk_pwm_data mt8183_pwm_data = { + .enable_mask = BIT(0), + .con0 = 0x18, + .con0_sel = 0x0, + .con1 = 0x1c, + .has_commit = false, + .bls_debug = 0x80, + .bls_debug_mask = 0x3, +}; + +static const struct of_device_id mtk_disp_pwm_of_match[] = { + { .compatible = "mediatek,mt2701-disp-pwm", .data = &mt2701_pwm_data}, + { .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data}, + { .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data}, + { .compatible = "mediatek,mt8183-disp-pwm", .data = &mt8183_pwm_data}, + { } +}; +MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match); + +static struct platform_driver mtk_disp_pwm_driver = { + .driver = { + .name = "mediatek-disp-pwm", + .of_match_table = mtk_disp_pwm_of_match, + }, + .probe = mtk_disp_pwm_probe, + .remove = mtk_disp_pwm_remove, +}; +module_platform_driver(mtk_disp_pwm_driver); + +MODULE_AUTHOR("YH Huang "); +MODULE_DESCRIPTION("MediaTek SoC display PWM driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3