From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pwm/pwm-visconti.c | 177 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 drivers/pwm/pwm-visconti.c (limited to 'drivers/pwm/pwm-visconti.c') diff --git a/drivers/pwm/pwm-visconti.c b/drivers/pwm/pwm-visconti.c new file mode 100644 index 000000000..e3fb79b3e --- /dev/null +++ b/drivers/pwm/pwm-visconti.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Toshiba Visconti pulse-width-modulation controller driver + * + * Copyright (c) 2020 - 2021 TOSHIBA CORPORATION + * Copyright (c) 2020 - 2021 Toshiba Electronic Devices & Storage Corporation + * + * Authors: Nobuhiro Iwamatsu + * + * Limitations: + * - The fixed input clock is running at 1 MHz and is divided by either 1, + * 2, 4 or 8. + * - When the settings of the PWM are modified, the new values are shadowed + * in hardware until the PIPGM_PCSR register is written and the currently + * running period is completed. This way the hardware switches atomically + * from the old setting to the new. + * - Disabling the hardware completes the currently running period and keeps + * the output at low level at all times. + */ + +#include +#include +#include +#include +#include +#include + +#define PIPGM_PCSR(ch) (0x400 + 4 * (ch)) +#define PIPGM_PDUT(ch) (0x420 + 4 * (ch)) +#define PIPGM_PWMC(ch) (0x440 + 4 * (ch)) + +#define PIPGM_PWMC_PWMACT BIT(5) +#define PIPGM_PWMC_CLK_MASK GENMASK(1, 0) +#define PIPGM_PWMC_POLARITY_MASK GENMASK(5, 5) + +struct visconti_pwm_chip { + struct pwm_chip chip; + void __iomem *base; +}; + +static inline struct visconti_pwm_chip *visconti_pwm_from_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct visconti_pwm_chip, chip); +} + +static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip); + u32 period, duty_cycle, pwmc0; + + if (!state->enabled) { + writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm)); + return 0; + } + + /* + * The biggest period the hardware can provide is + * (0xffff << 3) * 1000 ns + * This value fits easily in an u32, so simplify the maths by + * capping the values to 32 bit integers. + */ + if (state->period > (0xffff << 3) * 1000) + period = (0xffff << 3) * 1000; + else + period = state->period; + + if (state->duty_cycle > period) + duty_cycle = period; + else + duty_cycle = state->duty_cycle; + + /* + * The input clock runs fixed at 1 MHz, so we have only + * microsecond resolution and so can divide by + * NSEC_PER_SEC / CLKFREQ = 1000 without losing precision. + */ + period /= 1000; + duty_cycle /= 1000; + + if (!period) + return -ERANGE; + + /* + * PWMC controls a divider that divides the input clk by a power of two + * between 1 and 8. As a smaller divider yields higher precision, pick + * the smallest possible one. As period is at most 0xffff << 3, pwmc0 is + * in the intended range [0..3]. + */ + pwmc0 = fls(period >> 16); + if (WARN_ON(pwmc0 > 3)) + return -EINVAL; + + period >>= pwmc0; + duty_cycle >>= pwmc0; + + if (state->polarity == PWM_POLARITY_INVERSED) + pwmc0 |= PIPGM_PWMC_PWMACT; + writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm)); + writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm)); + writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm)); + + return 0; +} + +static int visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_state *state) +{ + struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip); + u32 period, duty, pwmc0, pwmc0_clk; + + period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm)); + duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm)); + pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm)); + pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK; + + state->period = (period << pwmc0_clk) * NSEC_PER_USEC; + state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC; + if (pwmc0 & PIPGM_PWMC_POLARITY_MASK) + state->polarity = PWM_POLARITY_INVERSED; + else + state->polarity = PWM_POLARITY_NORMAL; + + state->enabled = true; + + return 0; +} + +static const struct pwm_ops visconti_pwm_ops = { + .apply = visconti_pwm_apply, + .get_state = visconti_pwm_get_state, + .owner = THIS_MODULE, +}; + +static int visconti_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct visconti_pwm_chip *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->chip.dev = dev; + priv->chip.ops = &visconti_pwm_ops; + priv->chip.npwm = 4; + + ret = devm_pwmchip_add(&pdev->dev, &priv->chip); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n"); + + return 0; +} + +static const struct of_device_id visconti_pwm_of_match[] = { + { .compatible = "toshiba,visconti-pwm", }, + { } +}; +MODULE_DEVICE_TABLE(of, visconti_pwm_of_match); + +static struct platform_driver visconti_pwm_driver = { + .driver = { + .name = "pwm-visconti", + .of_match_table = visconti_pwm_of_match, + }, + .probe = visconti_pwm_probe, +}; +module_platform_driver(visconti_pwm_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Nobuhiro Iwamatsu "); +MODULE_ALIAS("platform:pwm-visconti"); -- cgit v1.2.3