From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/rapidio/rio-driver.c | 267 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 267 insertions(+) create mode 100644 drivers/rapidio/rio-driver.c (limited to 'drivers/rapidio/rio-driver.c') diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c new file mode 100644 index 000000000..a72bb0a40 --- /dev/null +++ b/drivers/rapidio/rio-driver.c @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * RapidIO driver support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + */ + +#include +#include +#include +#include +#include + +#include "rio.h" + +/** + * rio_match_device - Tell if a RIO device has a matching RIO device id structure + * @id: the RIO device id structure to match against + * @rdev: the RIO device structure to match against + * + * Used from driver probe and bus matching to check whether a RIO device + * matches a device id structure provided by a RIO driver. Returns the + * matching &struct rio_device_id or %NULL if there is no match. + */ +static const struct rio_device_id *rio_match_device(const struct rio_device_id + *id, + const struct rio_dev *rdev) +{ + while (id->vid || id->asm_vid) { + if (((id->vid == RIO_ANY_ID) || (id->vid == rdev->vid)) && + ((id->did == RIO_ANY_ID) || (id->did == rdev->did)) && + ((id->asm_vid == RIO_ANY_ID) + || (id->asm_vid == rdev->asm_vid)) + && ((id->asm_did == RIO_ANY_ID) + || (id->asm_did == rdev->asm_did))) + return id; + id++; + } + return NULL; +} + +/** + * rio_dev_get - Increments the reference count of the RIO device structure + * + * @rdev: RIO device being referenced + * + * Each live reference to a device should be refcounted. + * + * Drivers for RIO devices should normally record such references in + * their probe() methods, when they bind to a device, and release + * them by calling rio_dev_put(), in their disconnect() methods. + */ +struct rio_dev *rio_dev_get(struct rio_dev *rdev) +{ + if (rdev) + get_device(&rdev->dev); + + return rdev; +} + +/** + * rio_dev_put - Release a use of the RIO device structure + * + * @rdev: RIO device being disconnected + * + * Must be called when a user of a device is finished with it. + * When the last user of the device calls this function, the + * memory of the device is freed. + */ +void rio_dev_put(struct rio_dev *rdev) +{ + if (rdev) + put_device(&rdev->dev); +} + +/** + * rio_device_probe - Tell if a RIO device structure has a matching RIO device id structure + * @dev: the RIO device structure to match against + * + * return 0 and set rio_dev->driver when drv claims rio_dev, else error + */ +static int rio_device_probe(struct device *dev) +{ + struct rio_driver *rdrv = to_rio_driver(dev->driver); + struct rio_dev *rdev = to_rio_dev(dev); + int error = -ENODEV; + const struct rio_device_id *id; + + if (!rdev->driver && rdrv->probe) { + if (!rdrv->id_table) + return error; + id = rio_match_device(rdrv->id_table, rdev); + rio_dev_get(rdev); + if (id) + error = rdrv->probe(rdev, id); + if (error >= 0) { + rdev->driver = rdrv; + error = 0; + } else + rio_dev_put(rdev); + } + return error; +} + +/** + * rio_device_remove - Remove a RIO device from the system + * + * @dev: the RIO device structure to match against + * + * Remove a RIO device from the system. If it has an associated + * driver, then run the driver remove() method. Then update + * the reference count. + */ +static void rio_device_remove(struct device *dev) +{ + struct rio_dev *rdev = to_rio_dev(dev); + struct rio_driver *rdrv = rdev->driver; + + if (rdrv) { + if (rdrv->remove) + rdrv->remove(rdev); + rdev->driver = NULL; + } + + rio_dev_put(rdev); +} + +static void rio_device_shutdown(struct device *dev) +{ + struct rio_dev *rdev = to_rio_dev(dev); + struct rio_driver *rdrv = rdev->driver; + + dev_dbg(dev, "RIO: %s\n", __func__); + + if (rdrv && rdrv->shutdown) + rdrv->shutdown(rdev); +} + +/** + * rio_register_driver - register a new RIO driver + * @rdrv: the RIO driver structure to register + * + * Adds a &struct rio_driver to the list of registered drivers. + * Returns a negative value on error, otherwise 0. If no error + * occurred, the driver remains registered even if no device + * was claimed during registration. + */ +int rio_register_driver(struct rio_driver *rdrv) +{ + /* initialize common driver fields */ + rdrv->driver.name = rdrv->name; + rdrv->driver.bus = &rio_bus_type; + + /* register with core */ + return driver_register(&rdrv->driver); +} + +/** + * rio_unregister_driver - unregister a RIO driver + * @rdrv: the RIO driver structure to unregister + * + * Deletes the &struct rio_driver from the list of registered RIO + * drivers, gives it a chance to clean up by calling its remove() + * function for each device it was responsible for, and marks those + * devices as driverless. + */ +void rio_unregister_driver(struct rio_driver *rdrv) +{ + driver_unregister(&rdrv->driver); +} + +void rio_attach_device(struct rio_dev *rdev) +{ + rdev->dev.bus = &rio_bus_type; +} +EXPORT_SYMBOL_GPL(rio_attach_device); + +/** + * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure + * @dev: the standard device structure to match against + * @drv: the standard driver structure containing the ids to match against + * + * Used by a driver to check whether a RIO device present in the + * system is in its list of supported devices. Returns 1 if + * there is a matching &struct rio_device_id or 0 if there is + * no match. + */ +static int rio_match_bus(struct device *dev, struct device_driver *drv) +{ + struct rio_dev *rdev = to_rio_dev(dev); + struct rio_driver *rdrv = to_rio_driver(drv); + const struct rio_device_id *id = rdrv->id_table; + const struct rio_device_id *found_id; + + if (!id) + goto out; + + found_id = rio_match_device(id, rdev); + + if (found_id) + return 1; + + out:return 0; +} + +static int rio_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct rio_dev *rdev; + + if (!dev) + return -ENODEV; + + rdev = to_rio_dev(dev); + if (!rdev) + return -ENODEV; + + if (add_uevent_var(env, "MODALIAS=rapidio:v%04Xd%04Xav%04Xad%04X", + rdev->vid, rdev->did, rdev->asm_vid, rdev->asm_did)) + return -ENOMEM; + return 0; +} + +struct class rio_mport_class = { + .name = "rapidio_port", + .owner = THIS_MODULE, + .dev_groups = rio_mport_groups, +}; +EXPORT_SYMBOL_GPL(rio_mport_class); + +struct bus_type rio_bus_type = { + .name = "rapidio", + .match = rio_match_bus, + .dev_groups = rio_dev_groups, + .bus_groups = rio_bus_groups, + .probe = rio_device_probe, + .remove = rio_device_remove, + .shutdown = rio_device_shutdown, + .uevent = rio_uevent, +}; + +/** + * rio_bus_init - Register the RapidIO bus with the device model + * + * Registers the RIO mport device class and RIO bus type with the Linux + * device model. + */ +static int __init rio_bus_init(void) +{ + int ret; + + ret = class_register(&rio_mport_class); + if (!ret) { + ret = bus_register(&rio_bus_type); + if (ret) + class_unregister(&rio_mport_class); + } + return ret; +} + +postcore_initcall(rio_bus_init); + +EXPORT_SYMBOL_GPL(rio_register_driver); +EXPORT_SYMBOL_GPL(rio_unregister_driver); +EXPORT_SYMBOL_GPL(rio_bus_type); +EXPORT_SYMBOL_GPL(rio_dev_get); +EXPORT_SYMBOL_GPL(rio_dev_put); -- cgit v1.2.3