From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/rapidio/switches/idt_gen2.c | 490 ++++++++++++++++++++++++++++++++++++ 1 file changed, 490 insertions(+) create mode 100644 drivers/rapidio/switches/idt_gen2.c (limited to 'drivers/rapidio/switches/idt_gen2.c') diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c new file mode 100644 index 000000000..8a89bba17 --- /dev/null +++ b/drivers/rapidio/switches/idt_gen2.c @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * IDT CPS Gen.2 Serial RapidIO switch family support + * + * Copyright 2010 Integrated Device Technology, Inc. + * Alexandre Bounine + */ + +#include +#include +#include +#include +#include +#include + +#include +#include "../rio.h" + +#define LOCAL_RTE_CONF_DESTID_SEL 0x010070 +#define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f + +#define IDT_LT_ERR_REPORT_EN 0x03100c + +#define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40) +#define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04 + +#define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40) +#define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c +#define IDT_PORT_INIT_TX_ACQUIRED 0x00000020 + +#define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100) +#define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10 + +#define IDT_DEV_CTRL_1 0xf2000c +#define IDT_DEV_CTRL_1_GENPW 0x02000000 +#define IDT_DEV_CTRL_1_PRSTBEH 0x00000001 + +#define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008 +#define IDT_CFGBLK_ERR_REPORT 0xf20014 +#define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002 + +#define IDT_AUX_PORT_ERR_CAP_EN 0x020000 +#define IDT_AUX_ERR_REPORT_EN 0xf20018 +#define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002 +#define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001 + +#define IDT_ISLTL_ADDRESS_CAP 0x021014 + +#define IDT_RIO_DOMAIN 0xf20020 +#define IDT_RIO_DOMAIN_MASK 0x000000ff + +#define IDT_PW_INFO_CSR 0xf20024 + +#define IDT_SOFT_RESET 0xf20040 +#define IDT_SOFT_RESET_REQ 0x00030097 + +#define IDT_I2C_MCTRL 0xf20050 +#define IDT_I2C_MCTRL_GENPW 0x04000000 + +#define IDT_JTAG_CTRL 0xf2005c +#define IDT_JTAG_CTRL_GENPW 0x00000002 + +#define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100) +#define IDT_LANE_CTRL_BC 0xffff00 +#define IDT_LANE_CTRL_GENPW 0x00200000 +#define IDT_LANE_DFE_1_BC 0xffff18 +#define IDT_LANE_DFE_2_BC 0xffff1c + +#define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100) +#define IDT_PORT_OPS_GENPW 0x08000000 +#define IDT_PORT_OPS_PL_ELOG 0x00000040 +#define IDT_PORT_OPS_LL_ELOG 0x00000020 +#define IDT_PORT_OPS_LT_ELOG 0x00000010 +#define IDT_PORT_OPS_BC 0xf4ff04 + +#define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100) + +#define IDT_ERR_CAP 0xfd0000 +#define IDT_ERR_CAP_LOG_OVERWR 0x00000004 + +#define IDT_ERR_RD 0xfd0004 + +#define IDT_DEFAULT_ROUTE 0xde +#define IDT_NO_ROUTE 0xdf + +static int +idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 route_port) +{ + /* + * Select routing table to update + */ + if (table == RIO_GLOBAL_TABLE) + table = 0; + else + table++; + + if (route_port == RIO_INVALID_ROUTE) + route_port = IDT_DEFAULT_ROUTE; + + rio_mport_write_config_32(mport, destid, hopcount, + LOCAL_RTE_CONF_DESTID_SEL, table); + + /* + * Program destination port for the specified destID + */ + rio_mport_write_config_32(mport, destid, hopcount, + RIO_STD_RTE_CONF_DESTID_SEL_CSR, + (u32)route_destid); + + rio_mport_write_config_32(mport, destid, hopcount, + RIO_STD_RTE_CONF_PORT_SEL_CSR, + (u32)route_port); + udelay(10); + + return 0; +} + +static int +idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 *route_port) +{ + u32 result; + + /* + * Select routing table to read + */ + if (table == RIO_GLOBAL_TABLE) + table = 0; + else + table++; + + rio_mport_write_config_32(mport, destid, hopcount, + LOCAL_RTE_CONF_DESTID_SEL, table); + + rio_mport_write_config_32(mport, destid, hopcount, + RIO_STD_RTE_CONF_DESTID_SEL_CSR, + route_destid); + + rio_mport_read_config_32(mport, destid, hopcount, + RIO_STD_RTE_CONF_PORT_SEL_CSR, &result); + + if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result) + *route_port = RIO_INVALID_ROUTE; + else + *route_port = (u8)result; + + return 0; +} + +static int +idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table) +{ + u32 i; + + /* + * Select routing table to read + */ + if (table == RIO_GLOBAL_TABLE) + table = 0; + else + table++; + + rio_mport_write_config_32(mport, destid, hopcount, + LOCAL_RTE_CONF_DESTID_SEL, table); + + for (i = RIO_STD_RTE_CONF_EXTCFGEN; + i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) { + rio_mport_write_config_32(mport, destid, hopcount, + RIO_STD_RTE_CONF_DESTID_SEL_CSR, i); + rio_mport_write_config_32(mport, destid, hopcount, + RIO_STD_RTE_CONF_PORT_SEL_CSR, + (IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) | + (IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE); + i += 4; + } + + return 0; +} + + +static int +idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount, + u8 sw_domain) +{ + /* + * Switch domain configuration operates only at global level + */ + rio_mport_write_config_32(mport, destid, hopcount, + IDT_RIO_DOMAIN, (u32)sw_domain); + return 0; +} + +static int +idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, + u8 *sw_domain) +{ + u32 regval; + + /* + * Switch domain configuration operates only at global level + */ + rio_mport_read_config_32(mport, destid, hopcount, + IDT_RIO_DOMAIN, ®val); + + *sw_domain = (u8)(regval & 0xff); + + return 0; +} + +static int +idtg2_em_init(struct rio_dev *rdev) +{ + u32 regval; + int i, tmp; + + /* + * This routine performs device-specific initialization only. + * All standard EM configuration should be performed at upper level. + */ + + pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); + + /* Set Port-Write info CSR: PRIO=3 and CRF=1 */ + rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000); + + /* + * Configure LT LAYER error reporting. + */ + + /* Enable standard (RIO.p8) error reporting */ + rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN, + REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR | + REM_LTL_ERR_UNSUPTR); + + /* Use Port-Writes for LT layer error reporting. + * Enable per-port reset + */ + rio_read_config_32(rdev, IDT_DEV_CTRL_1, ®val); + rio_write_config_32(rdev, IDT_DEV_CTRL_1, + regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH); + + /* + * Configure PORT error reporting. + */ + + /* Report all RIO.p8 errors supported by device */ + rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037); + + /* Configure reporting of implementation specific errors/events */ + rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC, + IDT_PORT_INIT_TX_ACQUIRED); + + /* Use Port-Writes for port error reporting and enable error logging */ + tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo); + for (i = 0; i < tmp; i++) { + rio_read_config_32(rdev, IDT_PORT_OPS(i), ®val); + rio_write_config_32(rdev, + IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW | + IDT_PORT_OPS_PL_ELOG | + IDT_PORT_OPS_LL_ELOG | + IDT_PORT_OPS_LT_ELOG); + } + /* Overwrite error log if full */ + rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR); + + /* + * Configure LANE error reporting. + */ + + /* Disable line error reporting */ + rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0); + + /* Use Port-Writes for lane error reporting (when enabled) + * (do per-lane update because lanes may have different configuration) + */ + tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16; + for (i = 0; i < tmp; i++) { + rio_read_config_32(rdev, IDT_LANE_CTRL(i), ®val); + rio_write_config_32(rdev, IDT_LANE_CTRL(i), + regval | IDT_LANE_CTRL_GENPW); + } + + /* + * Configure AUX error reporting. + */ + + /* Disable JTAG and I2C Error capture */ + rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0); + + /* Disable JTAG and I2C Error reporting/logging */ + rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0); + + /* Disable Port-Write notification from JTAG */ + rio_write_config_32(rdev, IDT_JTAG_CTRL, 0); + + /* Disable Port-Write notification from I2C */ + rio_read_config_32(rdev, IDT_I2C_MCTRL, ®val); + rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW); + + /* + * Configure CFG_BLK error reporting. + */ + + /* Disable Configuration Block error capture */ + rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0); + + /* Disable Port-Writes for Configuration Block error reporting */ + rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, ®val); + rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT, + regval & ~IDT_CFGBLK_ERR_REPORT_GENPW); + + /* set TVAL = ~50us */ + rio_write_config_32(rdev, + rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8); + + return 0; +} + +static int +idtg2_em_handler(struct rio_dev *rdev, u8 portnum) +{ + u32 regval, em_perrdet, em_ltlerrdet; + + rio_read_config_32(rdev, + rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet); + if (em_ltlerrdet) { + /* Service Logical/Transport Layer Error(s) */ + if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) { + /* Implementation specific error reported */ + rio_read_config_32(rdev, + IDT_ISLTL_ADDRESS_CAP, ®val); + + pr_debug("RIO: %s Implementation Specific LTL errors" \ + " 0x%x @(0x%x)\n", + rio_name(rdev), em_ltlerrdet, regval); + + /* Clear implementation specific address capture CSR */ + rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0); + + } + } + + rio_read_config_32(rdev, + rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet); + if (em_perrdet) { + /* Service Port-Level Error(s) */ + if (em_perrdet & REM_PED_IMPL_SPEC) { + /* Implementation Specific port error reported */ + + /* Get IS errors reported */ + rio_read_config_32(rdev, + IDT_PORT_ISERR_DET(portnum), ®val); + + pr_debug("RIO: %s Implementation Specific Port" \ + " errors 0x%x\n", rio_name(rdev), regval); + + /* Clear all implementation specific events */ + rio_write_config_32(rdev, + IDT_PORT_ISERR_DET(portnum), 0); + } + } + + return 0; +} + +static ssize_t +idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct rio_dev *rdev = to_rio_dev(dev); + ssize_t len = 0; + u32 regval; + + while (!rio_read_config_32(rdev, IDT_ERR_RD, ®val)) { + if (!regval) /* 0 = end of log */ + break; + len += snprintf(buf + len, PAGE_SIZE - len, + "%08x\n", regval); + if (len >= (PAGE_SIZE - 10)) + break; + } + + return len; +} + +static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL); + +static int idtg2_sysfs(struct rio_dev *rdev, bool create) +{ + struct device *dev = &rdev->dev; + int err = 0; + + if (create) { + /* Initialize sysfs entries */ + err = device_create_file(dev, &dev_attr_errlog); + if (err) + dev_err(dev, "Unable create sysfs errlog file\n"); + } else + device_remove_file(dev, &dev_attr_errlog); + + return err; +} + +static struct rio_switch_ops idtg2_switch_ops = { + .owner = THIS_MODULE, + .add_entry = idtg2_route_add_entry, + .get_entry = idtg2_route_get_entry, + .clr_table = idtg2_route_clr_table, + .set_domain = idtg2_set_domain, + .get_domain = idtg2_get_domain, + .em_init = idtg2_em_init, + .em_handle = idtg2_em_handler, +}; + +static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + + rdev->rswitch->ops = &idtg2_switch_ops; + + if (rdev->do_enum) { + /* Ensure that default routing is disabled on startup */ + rio_write_config_32(rdev, + RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE); + } + + spin_unlock(&rdev->rswitch->lock); + + /* Create device-specific sysfs attributes */ + idtg2_sysfs(rdev, true); + + return 0; +} + +static void idtg2_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &idtg2_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); + /* Remove device-specific sysfs attributes */ + idtg2_sysfs(rdev, false); +} + +static const struct rio_device_id idtg2_id_table[] = { + {RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver idtg2_driver = { + .name = "idt_gen2", + .id_table = idtg2_id_table, + .probe = idtg2_probe, + .remove = idtg2_remove, +}; + +static int __init idtg2_init(void) +{ + return rio_register_driver(&idtg2_driver); +} + +static void __exit idtg2_exit(void) +{ + pr_debug("RIO: %s\n", __func__); + rio_unregister_driver(&idtg2_driver); + pr_debug("RIO: %s done\n", __func__); +} + +device_initcall(idtg2_init); +module_exit(idtg2_exit); + +MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); -- cgit v1.2.3