From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/88pm8607.c | 406 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 406 insertions(+) create mode 100644 drivers/regulator/88pm8607.c (limited to 'drivers/regulator/88pm8607.c') diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c new file mode 100644 index 000000000..1d1c4a7ec --- /dev/null +++ b/drivers/regulator/88pm8607.c @@ -0,0 +1,406 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Regulators driver for Marvell 88PM8607 + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct pm8607_regulator_info { + struct regulator_desc desc; + + unsigned int *vol_suspend; + + int slope_double; +}; + +static const unsigned int BUCK1_table[] = { + 725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000, + 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000, + 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, + 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, + 0, 25000, 50000, 75000, 100000, 125000, 150000, 175000, + 200000, 225000, 250000, 275000, 300000, 325000, 350000, 375000, + 400000, 425000, 450000, 475000, 500000, 525000, 550000, 575000, + 600000, 625000, 650000, 675000, 700000, 725000, 750000, 775000, +}; + +static const unsigned int BUCK1_suspend_table[] = { + 0, 25000, 50000, 75000, 100000, 125000, 150000, 175000, + 200000, 225000, 250000, 275000, 300000, 325000, 350000, 375000, + 400000, 425000, 450000, 475000, 500000, 525000, 550000, 575000, + 600000, 625000, 650000, 675000, 700000, 725000, 750000, 775000, + 800000, 825000, 850000, 875000, 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, 1500000, 1500000, 1500000, 1500000, +}; + +static const unsigned int BUCK2_table[] = { + 0, 50000, 100000, 150000, 200000, 250000, 300000, 350000, + 400000, 450000, 500000, 550000, 600000, 650000, 700000, 750000, + 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, 1150000, + 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, 1550000, + 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000, 1950000, + 2000000, 2050000, 2100000, 2150000, 2200000, 2250000, 2300000, 2350000, + 2400000, 2450000, 2500000, 2550000, 2600000, 2650000, 2700000, 2750000, + 2800000, 2850000, 2900000, 2950000, 3000000, 3000000, 3000000, 3000000, +}; + +static const unsigned int BUCK2_suspend_table[] = { + 0, 50000, 100000, 150000, 200000, 250000, 300000, 350000, + 400000, 450000, 500000, 550000, 600000, 650000, 700000, 750000, + 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, 1150000, + 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, 1550000, + 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000, 1950000, + 2000000, 2050000, 2100000, 2150000, 2200000, 2250000, 2300000, 2350000, + 2400000, 2450000, 2500000, 2550000, 2600000, 2650000, 2700000, 2750000, + 2800000, 2850000, 2900000, 2950000, 3000000, 3000000, 3000000, 3000000, +}; + +static const unsigned int BUCK3_table[] = { + 0, 25000, 50000, 75000, 100000, 125000, 150000, 175000, + 200000, 225000, 250000, 275000, 300000, 325000, 350000, 375000, + 400000, 425000, 450000, 475000, 500000, 525000, 550000, 575000, + 600000, 625000, 650000, 675000, 700000, 725000, 750000, 775000, + 800000, 825000, 850000, 875000, 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, 1500000, 1500000, 1500000, 1500000, +}; + +static const unsigned int BUCK3_suspend_table[] = { + 0, 25000, 50000, 75000, 100000, 125000, 150000, 175000, + 200000, 225000, 250000, 275000, 300000, 325000, 350000, 375000, + 400000, 425000, 450000, 475000, 500000, 525000, 550000, 575000, + 600000, 625000, 650000, 675000, 700000, 725000, 750000, 775000, + 800000, 825000, 850000, 875000, 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, 1500000, 1500000, 1500000, 1500000, +}; + +static const unsigned int LDO1_table[] = { + 1800000, 1200000, 2800000, 0, +}; + +static const unsigned int LDO1_suspend_table[] = { + 1800000, 1200000, 0, 0, +}; + +static const unsigned int LDO2_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 3300000, +}; + +static const unsigned int LDO2_suspend_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 2900000, +}; + +static const unsigned int LDO3_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 3300000, +}; + +static const unsigned int LDO3_suspend_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 2900000, +}; + +static const unsigned int LDO4_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2900000, 3300000, +}; + +static const unsigned int LDO4_suspend_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2900000, 2900000, +}; + +static const unsigned int LDO5_table[] = { + 2900000, 3000000, 3100000, 3300000, +}; + +static const unsigned int LDO5_suspend_table[] = { + 2900000, 0, 0, 0, +}; + +static const unsigned int LDO6_table[] = { + 1800000, 1850000, 2600000, 2650000, 2700000, 2750000, 2800000, 3300000, +}; + +static const unsigned int LDO6_suspend_table[] = { + 1800000, 1850000, 2600000, 2650000, 2700000, 2750000, 2800000, 2900000, +}; + +static const unsigned int LDO7_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 2900000, +}; + +static const unsigned int LDO7_suspend_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 2900000, +}; + +static const unsigned int LDO8_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 2900000, +}; + +static const unsigned int LDO8_suspend_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 2900000, +}; + +static const unsigned int LDO9_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 3300000, +}; + +static const unsigned int LDO9_suspend_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 2900000, +}; + +static const unsigned int LDO10_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 3300000, + 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, +}; + +static const unsigned int LDO10_suspend_table[] = { + 1800000, 1850000, 1900000, 2700000, 2750000, 2800000, 2850000, 2900000, + 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, +}; + +static const unsigned int LDO12_table[] = { + 1800000, 1900000, 2700000, 2800000, 2900000, 3000000, 3100000, 3300000, + 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, +}; + +static const unsigned int LDO12_suspend_table[] = { + 1800000, 1900000, 2700000, 2800000, 2900000, 2900000, 2900000, 2900000, + 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, 1200000, +}; + +static const unsigned int LDO13_table[] = { + 1200000, 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0, +}; + +static const unsigned int LDO13_suspend_table[] = { + 0, +}; + +static const unsigned int LDO14_table[] = { + 1800000, 1850000, 2700000, 2750000, 2800000, 2850000, 2900000, 3300000, +}; + +static const unsigned int LDO14_suspend_table[] = { + 1800000, 1850000, 2700000, 2750000, 2800000, 2850000, 2900000, 2900000, +}; + +static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + int ret; + + ret = regulator_list_voltage_table(rdev, index); + if (ret < 0) + return ret; + + if (info->slope_double) + ret <<= 1; + + return ret; +} + +static const struct regulator_ops pm8607_regulator_ops = { + .list_voltage = pm8607_list_voltage, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_ops pm8606_preg_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +#define PM8606_PREG(ereg, ebit) \ +{ \ + .desc = { \ + .name = "PREG", \ + .of_match = of_match_ptr("PREG"), \ + .regulators_node = of_match_ptr("regulators"), \ + .ops = &pm8606_preg_ops, \ + .type = REGULATOR_CURRENT, \ + .id = PM8606_ID_PREG, \ + .owner = THIS_MODULE, \ + .enable_reg = PM8606_##ereg, \ + .enable_mask = (ebit), \ + .enable_is_inverted = true, \ + }, \ +} + +#define PM8607_DVC(vreg, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(#vreg), \ + .regulators_node = of_match_ptr("regulators"), \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_##vreg, \ + .owner = THIS_MODULE, \ + .volt_table = vreg##_table, \ + .n_voltages = ARRAY_SIZE(vreg##_table), \ + .vsel_reg = PM8607_##vreg, \ + .vsel_mask = ARRAY_SIZE(vreg##_table) - 1, \ + .apply_reg = PM8607_##ureg, \ + .apply_bit = (ubit), \ + .enable_reg = PM8607_##ereg, \ + .enable_mask = 1 << (ebit), \ + }, \ + .slope_double = (0), \ + .vol_suspend = (unsigned int *)&vreg##_suspend_table, \ +} + +#define PM8607_LDO(_id, vreg, shift, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .of_match = of_match_ptr("LDO" #_id), \ + .regulators_node = of_match_ptr("regulators"), \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_LDO##_id, \ + .owner = THIS_MODULE, \ + .volt_table = LDO##_id##_table, \ + .n_voltages = ARRAY_SIZE(LDO##_id##_table), \ + .vsel_reg = PM8607_##vreg, \ + .vsel_mask = (ARRAY_SIZE(LDO##_id##_table) - 1) << (shift), \ + .enable_reg = PM8607_##ereg, \ + .enable_mask = 1 << (ebit), \ + }, \ + .slope_double = (0), \ + .vol_suspend = (unsigned int *)&LDO##_id##_suspend_table, \ +} + +static struct pm8607_regulator_info pm8607_regulator_info[] = { + PM8607_DVC(BUCK1, GO, BIT(0), SUPPLIES_EN11, 0), + PM8607_DVC(BUCK2, GO, BIT(1), SUPPLIES_EN11, 1), + PM8607_DVC(BUCK3, GO, BIT(2), SUPPLIES_EN11, 2), + + PM8607_LDO(1, LDO1, 0, SUPPLIES_EN11, 3), + PM8607_LDO(2, LDO2, 0, SUPPLIES_EN11, 4), + PM8607_LDO(3, LDO3, 0, SUPPLIES_EN11, 5), + PM8607_LDO(4, LDO4, 0, SUPPLIES_EN11, 6), + PM8607_LDO(5, LDO5, 0, SUPPLIES_EN11, 7), + PM8607_LDO(6, LDO6, 0, SUPPLIES_EN12, 0), + PM8607_LDO(7, LDO7, 0, SUPPLIES_EN12, 1), + PM8607_LDO(8, LDO8, 0, SUPPLIES_EN12, 2), + PM8607_LDO(9, LDO9, 0, SUPPLIES_EN12, 3), + PM8607_LDO(10, LDO10, 0, SUPPLIES_EN12, 4), + PM8607_LDO(12, LDO12, 0, SUPPLIES_EN12, 5), + PM8607_LDO(13, VIBRATOR_SET, 1, VIBRATOR_SET, 0), + PM8607_LDO(14, LDO14, 0, SUPPLIES_EN12, 6), +}; + +static struct pm8607_regulator_info pm8606_regulator_info[] = { + PM8606_PREG(PREREGULATORB, 5), +}; + +static int pm8607_regulator_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm8607_regulator_info *info = NULL; + struct regulator_init_data *pdata = dev_get_platdata(&pdev->dev); + struct regulator_config config = { }; + struct regulator_dev *rdev; + struct resource *res; + int i; + + res = platform_get_resource(pdev, IORESOURCE_REG, 0); + if (res) { + /* There're resources in 88PM8607 regulator driver */ + for (i = 0; i < ARRAY_SIZE(pm8607_regulator_info); i++) { + info = &pm8607_regulator_info[i]; + if (info->desc.vsel_reg == res->start) + break; + } + if (i == ARRAY_SIZE(pm8607_regulator_info)) { + dev_err(&pdev->dev, "Failed to find regulator %llu\n", + (unsigned long long)res->start); + return -EINVAL; + } + } else { + /* There's no resource in 88PM8606 PREG regulator driver */ + info = &pm8606_regulator_info[0]; + /* i is used to check regulator ID */ + i = -1; + } + + /* check DVC ramp slope double */ + if ((i == PM8607_ID_BUCK3) && chip->buck3_double) + info->slope_double = 1; + + config.dev = chip->dev; + config.driver_data = info; + + if (pdata) + config.init_data = pdata; + + if (chip->id == CHIP_PM8607) + config.regmap = chip->regmap; + else + config.regmap = chip->regmap_companion; + + rdev = devm_regulator_register(&pdev->dev, &info->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + info->desc.name); + return PTR_ERR(rdev); + } + + platform_set_drvdata(pdev, info); + return 0; +} + +static const struct platform_device_id pm8607_regulator_driver_ids[] = { + { + .name = "88pm860x-regulator", + .driver_data = 0, + }, { + .name = "88pm860x-preg", + .driver_data = 0, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, pm8607_regulator_driver_ids); + +static struct platform_driver pm8607_regulator_driver = { + .driver = { + .name = "88pm860x-regulator", + }, + .probe = pm8607_regulator_probe, + .id_table = pm8607_regulator_driver_ids, +}; + +static int __init pm8607_regulator_init(void) +{ + return platform_driver_register(&pm8607_regulator_driver); +} +subsys_initcall(pm8607_regulator_init); + +static void __exit pm8607_regulator_exit(void) +{ + platform_driver_unregister(&pm8607_regulator_driver); +} +module_exit(pm8607_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Haojian Zhuang "); +MODULE_DESCRIPTION("Regulator Driver for Marvell 88PM8607 PMIC"); +MODULE_ALIAS("platform:88pm8607-regulator"); -- cgit v1.2.3