From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/as3722-regulator.c | 845 +++++++++++++++++++++++++++++++++++ 1 file changed, 845 insertions(+) create mode 100644 drivers/regulator/as3722-regulator.c (limited to 'drivers/regulator/as3722-regulator.c') diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c new file mode 100644 index 000000000..7bebf9ce6 --- /dev/null +++ b/drivers/regulator/as3722-regulator.c @@ -0,0 +1,845 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Voltage regulator support for AMS AS3722 PMIC + * + * Copyright (C) 2013 ams + * + * Author: Florian Lobmaier + * Author: Laxman Dewangan + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Regulator IDs */ +enum as3722_regulators_id { + AS3722_REGULATOR_ID_SD0, + AS3722_REGULATOR_ID_SD1, + AS3722_REGULATOR_ID_SD2, + AS3722_REGULATOR_ID_SD3, + AS3722_REGULATOR_ID_SD4, + AS3722_REGULATOR_ID_SD5, + AS3722_REGULATOR_ID_SD6, + AS3722_REGULATOR_ID_LDO0, + AS3722_REGULATOR_ID_LDO1, + AS3722_REGULATOR_ID_LDO2, + AS3722_REGULATOR_ID_LDO3, + AS3722_REGULATOR_ID_LDO4, + AS3722_REGULATOR_ID_LDO5, + AS3722_REGULATOR_ID_LDO6, + AS3722_REGULATOR_ID_LDO7, + AS3722_REGULATOR_ID_LDO9, + AS3722_REGULATOR_ID_LDO10, + AS3722_REGULATOR_ID_LDO11, + AS3722_REGULATOR_ID_MAX, +}; + +struct as3722_register_mapping { + u8 regulator_id; + const char *name; + const char *sname; + u8 vsel_reg; + u8 vsel_mask; + int n_voltages; + u32 enable_reg; + u8 enable_mask; + u32 control_reg; + u8 mode_mask; + u32 sleep_ctrl_reg; + u8 sleep_ctrl_mask; +}; + +struct as3722_regulator_config_data { + struct regulator_init_data *reg_init; + bool enable_tracking; + int ext_control; +}; + +struct as3722_regulators { + struct device *dev; + struct as3722 *as3722; + struct regulator_desc desc[AS3722_REGULATOR_ID_MAX]; + struct as3722_regulator_config_data + reg_config_data[AS3722_REGULATOR_ID_MAX]; +}; + +static const struct as3722_register_mapping as3722_reg_lookup[] = { + { + .regulator_id = AS3722_REGULATOR_ID_SD0, + .name = "as3722-sd0", + .vsel_reg = AS3722_SD0_VOLTAGE_REG, + .vsel_mask = AS3722_SD_VSEL_MASK, + .enable_reg = AS3722_SD_CONTROL_REG, + .enable_mask = AS3722_SDn_CTRL(0), + .sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG, + .sleep_ctrl_mask = AS3722_SD0_EXT_ENABLE_MASK, + .control_reg = AS3722_SD0_CONTROL_REG, + .mode_mask = AS3722_SD0_MODE_FAST, + }, + { + .regulator_id = AS3722_REGULATOR_ID_SD1, + .name = "as3722-sd1", + .vsel_reg = AS3722_SD1_VOLTAGE_REG, + .vsel_mask = AS3722_SD_VSEL_MASK, + .enable_reg = AS3722_SD_CONTROL_REG, + .enable_mask = AS3722_SDn_CTRL(1), + .sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG, + .sleep_ctrl_mask = AS3722_SD1_EXT_ENABLE_MASK, + .control_reg = AS3722_SD1_CONTROL_REG, + .mode_mask = AS3722_SD1_MODE_FAST, + }, + { + .regulator_id = AS3722_REGULATOR_ID_SD2, + .name = "as3722-sd2", + .sname = "vsup-sd2", + .vsel_reg = AS3722_SD2_VOLTAGE_REG, + .vsel_mask = AS3722_SD_VSEL_MASK, + .enable_reg = AS3722_SD_CONTROL_REG, + .enable_mask = AS3722_SDn_CTRL(2), + .sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG, + .sleep_ctrl_mask = AS3722_SD2_EXT_ENABLE_MASK, + .control_reg = AS3722_SD23_CONTROL_REG, + .mode_mask = AS3722_SD2_MODE_FAST, + .n_voltages = AS3722_SD2_VSEL_MAX + 1, + }, + { + .regulator_id = AS3722_REGULATOR_ID_SD3, + .name = "as3722-sd3", + .sname = "vsup-sd3", + .vsel_reg = AS3722_SD3_VOLTAGE_REG, + .vsel_mask = AS3722_SD_VSEL_MASK, + .enable_reg = AS3722_SD_CONTROL_REG, + .enable_mask = AS3722_SDn_CTRL(3), + .sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG, + .sleep_ctrl_mask = AS3722_SD3_EXT_ENABLE_MASK, + .control_reg = AS3722_SD23_CONTROL_REG, + .mode_mask = AS3722_SD3_MODE_FAST, + .n_voltages = AS3722_SD2_VSEL_MAX + 1, + }, + { + .regulator_id = AS3722_REGULATOR_ID_SD4, + .name = "as3722-sd4", + .sname = "vsup-sd4", + .vsel_reg = AS3722_SD4_VOLTAGE_REG, + .vsel_mask = AS3722_SD_VSEL_MASK, + .enable_reg = AS3722_SD_CONTROL_REG, + .enable_mask = AS3722_SDn_CTRL(4), + .sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG, + .sleep_ctrl_mask = AS3722_SD4_EXT_ENABLE_MASK, + .control_reg = AS3722_SD4_CONTROL_REG, + .mode_mask = AS3722_SD4_MODE_FAST, + .n_voltages = AS3722_SD2_VSEL_MAX + 1, + }, + { + .regulator_id = AS3722_REGULATOR_ID_SD5, + .name = "as3722-sd5", + .sname = "vsup-sd5", + .vsel_reg = AS3722_SD5_VOLTAGE_REG, + .vsel_mask = AS3722_SD_VSEL_MASK, + .enable_reg = AS3722_SD_CONTROL_REG, + .enable_mask = AS3722_SDn_CTRL(5), + .sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG, + .sleep_ctrl_mask = AS3722_SD5_EXT_ENABLE_MASK, + .control_reg = AS3722_SD5_CONTROL_REG, + .mode_mask = AS3722_SD5_MODE_FAST, + .n_voltages = AS3722_SD2_VSEL_MAX + 1, + }, + { + .regulator_id = AS3722_REGULATOR_ID_SD6, + .name = "as3722-sd6", + .vsel_reg = AS3722_SD6_VOLTAGE_REG, + .vsel_mask = AS3722_SD_VSEL_MASK, + .enable_reg = AS3722_SD_CONTROL_REG, + .enable_mask = AS3722_SDn_CTRL(6), + .sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG, + .sleep_ctrl_mask = AS3722_SD6_EXT_ENABLE_MASK, + .control_reg = AS3722_SD6_CONTROL_REG, + .mode_mask = AS3722_SD6_MODE_FAST, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO0, + .name = "as3722-ldo0", + .sname = "vin-ldo0", + .vsel_reg = AS3722_LDO0_VOLTAGE_REG, + .vsel_mask = AS3722_LDO0_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL0_REG, + .enable_mask = AS3722_LDO0_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG, + .sleep_ctrl_mask = AS3722_LDO0_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO0_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO1, + .name = "as3722-ldo1", + .sname = "vin-ldo1-6", + .vsel_reg = AS3722_LDO1_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL0_REG, + .enable_mask = AS3722_LDO1_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG, + .sleep_ctrl_mask = AS3722_LDO1_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO2, + .name = "as3722-ldo2", + .sname = "vin-ldo2-5-7", + .vsel_reg = AS3722_LDO2_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL0_REG, + .enable_mask = AS3722_LDO2_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG, + .sleep_ctrl_mask = AS3722_LDO2_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO3, + .name = "as3722-ldo3", + .sname = "vin-ldo3-4", + .vsel_reg = AS3722_LDO3_VOLTAGE_REG, + .vsel_mask = AS3722_LDO3_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL0_REG, + .enable_mask = AS3722_LDO3_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG, + .sleep_ctrl_mask = AS3722_LDO3_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO3_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO4, + .name = "as3722-ldo4", + .sname = "vin-ldo3-4", + .vsel_reg = AS3722_LDO4_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL0_REG, + .enable_mask = AS3722_LDO4_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG, + .sleep_ctrl_mask = AS3722_LDO4_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO5, + .name = "as3722-ldo5", + .sname = "vin-ldo2-5-7", + .vsel_reg = AS3722_LDO5_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL0_REG, + .enable_mask = AS3722_LDO5_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG, + .sleep_ctrl_mask = AS3722_LDO5_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO6, + .name = "as3722-ldo6", + .sname = "vin-ldo1-6", + .vsel_reg = AS3722_LDO6_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL0_REG, + .enable_mask = AS3722_LDO6_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG, + .sleep_ctrl_mask = AS3722_LDO6_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO7, + .name = "as3722-ldo7", + .sname = "vin-ldo2-5-7", + .vsel_reg = AS3722_LDO7_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL0_REG, + .enable_mask = AS3722_LDO7_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG, + .sleep_ctrl_mask = AS3722_LDO7_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO9, + .name = "as3722-ldo9", + .sname = "vin-ldo9-10", + .vsel_reg = AS3722_LDO9_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL1_REG, + .enable_mask = AS3722_LDO9_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG, + .sleep_ctrl_mask = AS3722_LDO9_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO10, + .name = "as3722-ldo10", + .sname = "vin-ldo9-10", + .vsel_reg = AS3722_LDO10_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL1_REG, + .enable_mask = AS3722_LDO10_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG, + .sleep_ctrl_mask = AS3722_LDO10_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, + { + .regulator_id = AS3722_REGULATOR_ID_LDO11, + .name = "as3722-ldo11", + .sname = "vin-ldo11", + .vsel_reg = AS3722_LDO11_VOLTAGE_REG, + .vsel_mask = AS3722_LDO_VSEL_MASK, + .enable_reg = AS3722_LDOCONTROL1_REG, + .enable_mask = AS3722_LDO11_CTRL, + .sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG, + .sleep_ctrl_mask = AS3722_LDO11_EXT_ENABLE_MASK, + .n_voltages = AS3722_LDO_NUM_VOLT, + }, +}; + +static const unsigned int as3722_ldo_current[] = { 150000, 300000 }; +static const unsigned int as3722_sd016_current[] = { + 2500000, 3000000, 3500000 +}; + +static const struct regulator_ops as3722_ldo0_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, +}; + +static const struct regulator_ops as3722_ldo0_extcntrl_ops = { + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, +}; + +static int as3722_ldo3_set_tracking_mode(struct as3722_regulators *as3722_reg, + int id, u8 mode) +{ + struct as3722 *as3722 = as3722_reg->as3722; + + switch (mode) { + case AS3722_LDO3_MODE_PMOS: + case AS3722_LDO3_MODE_PMOS_TRACKING: + case AS3722_LDO3_MODE_NMOS: + case AS3722_LDO3_MODE_SWITCH: + return as3722_update_bits(as3722, + as3722_reg_lookup[id].vsel_reg, + AS3722_LDO3_MODE_MASK, mode); + + default: + return -EINVAL; + } +} + +static int as3722_ldo3_get_current_limit(struct regulator_dev *rdev) +{ + return 150000; +} + +static const struct regulator_ops as3722_ldo3_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_current_limit = as3722_ldo3_get_current_limit, +}; + +static const struct regulator_ops as3722_ldo3_extcntrl_ops = { + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_current_limit = as3722_ldo3_get_current_limit, +}; + +static const struct regulator_ops as3722_ldo6_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, +}; + +static const struct regulator_ops as3722_ldo6_extcntrl_ops = { + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, +}; + +static const struct linear_range as3722_ldo_ranges[] = { + REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0), + REGULATOR_LINEAR_RANGE(825000, 0x01, 0x24, 25000), + REGULATOR_LINEAR_RANGE(1725000, 0x40, 0x7F, 25000), +}; + +static const struct regulator_ops as3722_ldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, +}; + +static const struct regulator_ops as3722_ldo_extcntrl_ops = { + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, +}; + +static unsigned int as3722_sd_get_mode(struct regulator_dev *rdev) +{ + struct as3722_regulators *as3722_regs = rdev_get_drvdata(rdev); + struct as3722 *as3722 = as3722_regs->as3722; + int id = rdev_get_id(rdev); + u32 val; + int ret; + + if (!as3722_reg_lookup[id].control_reg) + return -ENOTSUPP; + + ret = as3722_read(as3722, as3722_reg_lookup[id].control_reg, &val); + if (ret < 0) { + dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n", + as3722_reg_lookup[id].control_reg, ret); + return ret; + } + + if (val & as3722_reg_lookup[id].mode_mask) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static int as3722_sd_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct as3722_regulators *as3722_regs = rdev_get_drvdata(rdev); + struct as3722 *as3722 = as3722_regs->as3722; + u8 id = rdev_get_id(rdev); + u8 val = 0; + int ret; + + if (!as3722_reg_lookup[id].control_reg) + return -ERANGE; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = as3722_reg_lookup[id].mode_mask; + fallthrough; + case REGULATOR_MODE_NORMAL: + break; + default: + return -EINVAL; + } + + ret = as3722_update_bits(as3722, as3722_reg_lookup[id].control_reg, + as3722_reg_lookup[id].mode_mask, val); + if (ret < 0) { + dev_err(as3722_regs->dev, "Reg 0x%02x update failed: %d\n", + as3722_reg_lookup[id].control_reg, ret); + return ret; + } + return ret; +} + +static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs) +{ + int err; + unsigned val; + + err = as3722_read(as3722_regs->as3722, AS3722_FUSE7_REG, &val); + if (err < 0) { + dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n", + AS3722_FUSE7_REG, err); + return false; + } + if (val & AS3722_FUSE7_SD0_LOW_VOLTAGE) + return true; + return false; +} + +static const struct linear_range as3722_sd2345_ranges[] = { + REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0), + REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500), + REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), + REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7F, 50000), +}; + +static const struct regulator_ops as3722_sd016_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, + .get_mode = as3722_sd_get_mode, + .set_mode = as3722_sd_set_mode, +}; + +static const struct regulator_ops as3722_sd016_extcntrl_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, + .get_mode = as3722_sd_get_mode, + .set_mode = as3722_sd_set_mode, +}; + +static const struct regulator_ops as3722_sd2345_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .get_mode = as3722_sd_get_mode, + .set_mode = as3722_sd_set_mode, +}; + +static const struct regulator_ops as3722_sd2345_extcntrl_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .get_mode = as3722_sd_get_mode, + .set_mode = as3722_sd_set_mode, +}; + +static int as3722_extreg_init(struct as3722_regulators *as3722_regs, int id, + int ext_pwr_ctrl) +{ + int ret; + unsigned int val; + + if ((ext_pwr_ctrl < AS3722_EXT_CONTROL_ENABLE1) || + (ext_pwr_ctrl > AS3722_EXT_CONTROL_ENABLE3)) + return -EINVAL; + + val = ext_pwr_ctrl << (ffs(as3722_reg_lookup[id].sleep_ctrl_mask) - 1); + ret = as3722_update_bits(as3722_regs->as3722, + as3722_reg_lookup[id].sleep_ctrl_reg, + as3722_reg_lookup[id].sleep_ctrl_mask, val); + if (ret < 0) + dev_err(as3722_regs->dev, "Reg 0x%02x update failed: %d\n", + as3722_reg_lookup[id].sleep_ctrl_reg, ret); + return ret; +} + +static struct of_regulator_match as3722_regulator_matches[] = { + { .name = "sd0", }, + { .name = "sd1", }, + { .name = "sd2", }, + { .name = "sd3", }, + { .name = "sd4", }, + { .name = "sd5", }, + { .name = "sd6", }, + { .name = "ldo0", }, + { .name = "ldo1", }, + { .name = "ldo2", }, + { .name = "ldo3", }, + { .name = "ldo4", }, + { .name = "ldo5", }, + { .name = "ldo6", }, + { .name = "ldo7", }, + { .name = "ldo9", }, + { .name = "ldo10", }, + { .name = "ldo11", }, +}; + +static int as3722_get_regulator_dt_data(struct platform_device *pdev, + struct as3722_regulators *as3722_regs) +{ + struct device_node *np; + struct as3722_regulator_config_data *reg_config; + u32 prop; + int id; + int ret; + + np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators"); + if (!np) { + dev_err(&pdev->dev, "Device is not having regulators node\n"); + return -ENODEV; + } + pdev->dev.of_node = np; + + ret = of_regulator_match(&pdev->dev, np, as3722_regulator_matches, + ARRAY_SIZE(as3722_regulator_matches)); + of_node_put(np); + if (ret < 0) { + dev_err(&pdev->dev, "Parsing of regulator node failed: %d\n", + ret); + return ret; + } + + for (id = 0; id < ARRAY_SIZE(as3722_regulator_matches); ++id) { + struct device_node *reg_node; + + reg_config = &as3722_regs->reg_config_data[id]; + reg_config->reg_init = as3722_regulator_matches[id].init_data; + reg_node = as3722_regulator_matches[id].of_node; + + if (!reg_config->reg_init || !reg_node) + continue; + + ret = of_property_read_u32(reg_node, "ams,ext-control", &prop); + if (!ret) { + if (prop < 3) + reg_config->ext_control = prop; + else + dev_warn(&pdev->dev, + "ext-control have invalid option: %u\n", + prop); + } + reg_config->enable_tracking = + of_property_read_bool(reg_node, "ams,enable-tracking"); + } + return 0; +} + +static int as3722_regulator_probe(struct platform_device *pdev) +{ + struct as3722 *as3722 = dev_get_drvdata(pdev->dev.parent); + struct as3722_regulators *as3722_regs; + struct as3722_regulator_config_data *reg_config; + struct regulator_dev *rdev; + struct regulator_config config = { }; + const struct regulator_ops *ops; + int id; + int ret; + + as3722_regs = devm_kzalloc(&pdev->dev, sizeof(*as3722_regs), + GFP_KERNEL); + if (!as3722_regs) + return -ENOMEM; + + as3722_regs->dev = &pdev->dev; + as3722_regs->as3722 = as3722; + platform_set_drvdata(pdev, as3722_regs); + + ret = as3722_get_regulator_dt_data(pdev, as3722_regs); + if (ret < 0) + return ret; + + config.dev = &pdev->dev; + config.driver_data = as3722_regs; + config.regmap = as3722->regmap; + + for (id = 0; id < AS3722_REGULATOR_ID_MAX; id++) { + struct regulator_desc *desc; + + desc = &as3722_regs->desc[id]; + reg_config = &as3722_regs->reg_config_data[id]; + + desc->name = as3722_reg_lookup[id].name; + desc->supply_name = as3722_reg_lookup[id].sname; + desc->id = as3722_reg_lookup[id].regulator_id; + desc->n_voltages = as3722_reg_lookup[id].n_voltages; + desc->type = REGULATOR_VOLTAGE; + desc->owner = THIS_MODULE; + desc->enable_reg = as3722_reg_lookup[id].enable_reg; + desc->enable_mask = as3722_reg_lookup[id].enable_mask; + desc->vsel_reg = as3722_reg_lookup[id].vsel_reg; + desc->vsel_mask = as3722_reg_lookup[id].vsel_mask; + switch (id) { + case AS3722_REGULATOR_ID_LDO0: + if (reg_config->ext_control) + ops = &as3722_ldo0_extcntrl_ops; + else + ops = &as3722_ldo0_ops; + desc->min_uV = 825000; + desc->uV_step = 25000; + desc->linear_min_sel = 1; + desc->enable_time = 500; + desc->curr_table = as3722_ldo_current; + desc->n_current_limits = ARRAY_SIZE(as3722_ldo_current); + desc->csel_reg = as3722_reg_lookup[id].vsel_reg; + desc->csel_mask = AS3722_LDO_ILIMIT_MASK; + break; + case AS3722_REGULATOR_ID_LDO3: + if (reg_config->ext_control) + ops = &as3722_ldo3_extcntrl_ops; + else + ops = &as3722_ldo3_ops; + desc->min_uV = 620000; + desc->uV_step = 20000; + desc->linear_min_sel = 1; + desc->enable_time = 500; + if (reg_config->enable_tracking) { + ret = as3722_ldo3_set_tracking_mode(as3722_regs, + id, AS3722_LDO3_MODE_PMOS_TRACKING); + if (ret < 0) { + dev_err(&pdev->dev, + "LDO3 tracking failed: %d\n", + ret); + return ret; + } + } + break; + case AS3722_REGULATOR_ID_LDO6: + if (reg_config->ext_control) + ops = &as3722_ldo6_extcntrl_ops; + else + ops = &as3722_ldo6_ops; + desc->enable_time = 500; + desc->bypass_reg = AS3722_LDO6_VOLTAGE_REG; + desc->bypass_mask = AS3722_LDO_VSEL_MASK; + desc->bypass_val_on = AS3722_LDO6_VSEL_BYPASS; + desc->bypass_val_off = AS3722_LDO6_VSEL_BYPASS; + desc->linear_ranges = as3722_ldo_ranges; + desc->n_linear_ranges = ARRAY_SIZE(as3722_ldo_ranges); + desc->curr_table = as3722_ldo_current; + desc->n_current_limits = ARRAY_SIZE(as3722_ldo_current); + desc->csel_reg = as3722_reg_lookup[id].vsel_reg; + desc->csel_mask = AS3722_LDO_ILIMIT_MASK; + break; + case AS3722_REGULATOR_ID_SD0: + case AS3722_REGULATOR_ID_SD1: + case AS3722_REGULATOR_ID_SD6: + if (reg_config->ext_control) + ops = &as3722_sd016_extcntrl_ops; + else + ops = &as3722_sd016_ops; + if (id == AS3722_REGULATOR_ID_SD0 && + as3722_sd0_is_low_voltage(as3722_regs)) { + as3722_regs->desc[id].n_voltages = + AS3722_SD0_VSEL_LOW_VOL_MAX + 1; + as3722_regs->desc[id].min_uV = 410000; + } else { + as3722_regs->desc[id].n_voltages = + AS3722_SD0_VSEL_MAX + 1; + as3722_regs->desc[id].min_uV = 610000; + } + desc->uV_step = 10000; + desc->linear_min_sel = 1; + desc->enable_time = 600; + desc->curr_table = as3722_sd016_current; + desc->n_current_limits = + ARRAY_SIZE(as3722_sd016_current); + if (id == AS3722_REGULATOR_ID_SD0) { + desc->csel_reg = AS3722_OVCURRENT_REG; + desc->csel_mask = + AS3722_OVCURRENT_SD0_TRIP_MASK; + } else if (id == AS3722_REGULATOR_ID_SD1) { + desc->csel_reg = AS3722_OVCURRENT_REG; + desc->csel_mask = + AS3722_OVCURRENT_SD1_TRIP_MASK; + } else if (id == AS3722_REGULATOR_ID_SD6) { + desc->csel_reg = AS3722_OVCURRENT_DEB_REG; + desc->csel_mask = + AS3722_OVCURRENT_SD6_TRIP_MASK; + } + break; + case AS3722_REGULATOR_ID_SD2: + case AS3722_REGULATOR_ID_SD3: + case AS3722_REGULATOR_ID_SD4: + case AS3722_REGULATOR_ID_SD5: + if (reg_config->ext_control) + ops = &as3722_sd2345_extcntrl_ops; + else + ops = &as3722_sd2345_ops; + desc->linear_ranges = as3722_sd2345_ranges; + desc->n_linear_ranges = + ARRAY_SIZE(as3722_sd2345_ranges); + break; + default: + if (reg_config->ext_control) + ops = &as3722_ldo_extcntrl_ops; + else + ops = &as3722_ldo_ops; + desc->enable_time = 500; + desc->linear_ranges = as3722_ldo_ranges; + desc->n_linear_ranges = ARRAY_SIZE(as3722_ldo_ranges); + desc->curr_table = as3722_ldo_current; + desc->n_current_limits = ARRAY_SIZE(as3722_ldo_current); + desc->csel_reg = as3722_reg_lookup[id].vsel_reg; + desc->csel_mask = AS3722_LDO_ILIMIT_MASK; + break; + } + desc->ops = ops; + config.init_data = reg_config->reg_init; + config.of_node = as3722_regulator_matches[id].of_node; + rdev = devm_regulator_register(&pdev->dev, desc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(&pdev->dev, "regulator %d register failed %d\n", + id, ret); + return ret; + } + + if (reg_config->ext_control) { + ret = regulator_enable_regmap(rdev); + if (ret < 0) { + dev_err(&pdev->dev, + "Regulator %d enable failed: %d\n", + id, ret); + return ret; + } + ret = as3722_extreg_init(as3722_regs, id, + reg_config->ext_control); + if (ret < 0) { + dev_err(&pdev->dev, + "AS3722 ext control failed: %d", ret); + return ret; + } + } + } + return 0; +} + +static const struct of_device_id of_as3722_regulator_match[] = { + { .compatible = "ams,as3722-regulator", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_as3722_regulator_match); + +static struct platform_driver as3722_regulator_driver = { + .driver = { + .name = "as3722-regulator", + .of_match_table = of_as3722_regulator_match, + }, + .probe = as3722_regulator_probe, +}; + +module_platform_driver(as3722_regulator_driver); + +MODULE_ALIAS("platform:as3722-regulator"); +MODULE_DESCRIPTION("AS3722 regulator driver"); +MODULE_AUTHOR("Florian Lobmaier "); +MODULE_AUTHOR("Laxman Dewangan "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3