From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/irq_helpers.c | 436 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 436 insertions(+) create mode 100644 drivers/regulator/irq_helpers.c (limited to 'drivers/regulator/irq_helpers.c') diff --git a/drivers/regulator/irq_helpers.c b/drivers/regulator/irq_helpers.c new file mode 100644 index 000000000..fe7ae0f3f --- /dev/null +++ b/drivers/regulator/irq_helpers.c @@ -0,0 +1,436 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 ROHM Semiconductors +// regulator IRQ based event notification helpers +// +// Logic has been partially adapted from qcom-labibb driver. +// +// Author: Matti Vaittinen + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "internal.h" + +#define REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS 10000 + +struct regulator_irq { + struct regulator_irq_data rdata; + struct regulator_irq_desc desc; + int irq; + int retry_cnt; + struct delayed_work isr_work; +}; + +/* + * Should only be called from threaded handler to prevent potential deadlock + */ +static void rdev_flag_err(struct regulator_dev *rdev, int err) +{ + spin_lock(&rdev->err_lock); + rdev->cached_err |= err; + spin_unlock(&rdev->err_lock); +} + +static void rdev_clear_err(struct regulator_dev *rdev, int err) +{ + spin_lock(&rdev->err_lock); + rdev->cached_err &= ~err; + spin_unlock(&rdev->err_lock); +} + +static void regulator_notifier_isr_work(struct work_struct *work) +{ + struct regulator_irq *h; + struct regulator_irq_desc *d; + struct regulator_irq_data *rid; + int ret = 0; + int tmo, i; + int num_rdevs; + + h = container_of(work, struct regulator_irq, + isr_work.work); + d = &h->desc; + rid = &h->rdata; + num_rdevs = rid->num_states; + +reread: + if (d->fatal_cnt && h->retry_cnt > d->fatal_cnt) { + if (!d->die) + return hw_protection_shutdown("Regulator HW failure? - no IC recovery", + REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS); + ret = d->die(rid); + /* + * If the 'last resort' IC recovery failed we will have + * nothing else left to do... + */ + if (ret) + return hw_protection_shutdown("Regulator HW failure. IC recovery failed", + REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS); + + /* + * If h->die() was implemented we assume recovery has been + * attempted (probably regulator was shut down) and we + * just enable IRQ and bail-out. + */ + goto enable_out; + } + if (d->renable) { + ret = d->renable(rid); + + if (ret == REGULATOR_FAILED_RETRY) { + /* Driver could not get current status */ + h->retry_cnt++; + if (!d->reread_ms) + goto reread; + + tmo = d->reread_ms; + goto reschedule; + } + + if (ret) { + /* + * IC status reading succeeded. update error info + * just in case the renable changed it. + */ + for (i = 0; i < num_rdevs; i++) { + struct regulator_err_state *stat; + struct regulator_dev *rdev; + + stat = &rid->states[i]; + rdev = stat->rdev; + rdev_clear_err(rdev, (~stat->errors) & + stat->possible_errs); + } + h->retry_cnt++; + /* + * The IC indicated problem is still ON - no point in + * re-enabling the IRQ. Retry later. + */ + tmo = d->irq_off_ms; + goto reschedule; + } + } + + /* + * Either IC reported problem cleared or no status checker was provided. + * If problems are gone - good. If not - then the IRQ will fire again + * and we'll have a new nice loop. In any case we should clear error + * flags here and re-enable IRQs. + */ + for (i = 0; i < num_rdevs; i++) { + struct regulator_err_state *stat; + struct regulator_dev *rdev; + + stat = &rid->states[i]; + rdev = stat->rdev; + rdev_clear_err(rdev, stat->possible_errs); + } + + /* + * Things have been seemingly successful => zero retry-counter. + */ + h->retry_cnt = 0; + +enable_out: + enable_irq(h->irq); + + return; + +reschedule: + if (!d->high_prio) + mod_delayed_work(system_wq, &h->isr_work, + msecs_to_jiffies(tmo)); + else + mod_delayed_work(system_highpri_wq, &h->isr_work, + msecs_to_jiffies(tmo)); +} + +static irqreturn_t regulator_notifier_isr(int irq, void *data) +{ + struct regulator_irq *h = data; + struct regulator_irq_desc *d; + struct regulator_irq_data *rid; + unsigned long rdev_map = 0; + int num_rdevs; + int ret, i; + + d = &h->desc; + rid = &h->rdata; + num_rdevs = rid->num_states; + + if (d->fatal_cnt) + h->retry_cnt++; + + /* + * we spare a few cycles by not clearing statuses prior to this call. + * The IC driver must initialize the status buffers for rdevs + * which it indicates having active events via rdev_map. + * + * Maybe we should just to be on a safer side(?) + */ + ret = d->map_event(irq, rid, &rdev_map); + + /* + * If status reading fails (which is unlikely) we don't ack/disable + * IRQ but just increase fail count and retry when IRQ fires again. + * If retry_count exceeds the given safety limit we call IC specific die + * handler which can try disabling regulator(s). + * + * If no die handler is given we will just power-off as a last resort. + * + * We could try disabling all associated rdevs - but we might shoot + * ourselves in the head and leave the problematic regulator enabled. So + * if IC has no die-handler populated we just assume the regulator + * can't be disabled. + */ + if (unlikely(ret == REGULATOR_FAILED_RETRY)) + goto fail_out; + + h->retry_cnt = 0; + /* + * Let's not disable IRQ if there were no status bits for us. We'd + * better leave spurious IRQ handling to genirq + */ + if (ret || !rdev_map) + return IRQ_NONE; + + /* + * Some events are bogus if the regulator is disabled. Skip such events + * if all relevant regulators are disabled + */ + if (d->skip_off) { + for_each_set_bit(i, &rdev_map, num_rdevs) { + struct regulator_dev *rdev; + const struct regulator_ops *ops; + + rdev = rid->states[i].rdev; + ops = rdev->desc->ops; + + /* + * If any of the flagged regulators is enabled we do + * handle this + */ + if (ops->is_enabled(rdev)) + break; + } + if (i == num_rdevs) + return IRQ_NONE; + } + + /* Disable IRQ if HW keeps line asserted */ + if (d->irq_off_ms) + disable_irq_nosync(irq); + + /* + * IRQ seems to be for us. Let's fire correct notifiers / store error + * flags + */ + for_each_set_bit(i, &rdev_map, num_rdevs) { + struct regulator_err_state *stat; + struct regulator_dev *rdev; + + stat = &rid->states[i]; + rdev = stat->rdev; + + rdev_dbg(rdev, "Sending regulator notification EVT 0x%lx\n", + stat->notifs); + + regulator_notifier_call_chain(rdev, stat->notifs, NULL); + rdev_flag_err(rdev, stat->errors); + } + + if (d->irq_off_ms) { + if (!d->high_prio) + schedule_delayed_work(&h->isr_work, + msecs_to_jiffies(d->irq_off_ms)); + else + mod_delayed_work(system_highpri_wq, + &h->isr_work, + msecs_to_jiffies(d->irq_off_ms)); + } + + return IRQ_HANDLED; + +fail_out: + if (d->fatal_cnt && h->retry_cnt > d->fatal_cnt) { + /* If we have no recovery, just try shut down straight away */ + if (!d->die) { + hw_protection_shutdown("Regulator failure. Retry count exceeded", + REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS); + } else { + ret = d->die(rid); + /* If die() failed shut down as a last attempt to save the HW */ + if (ret) + hw_protection_shutdown("Regulator failure. Recovery failed", + REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS); + } + } + + return IRQ_NONE; +} + +static int init_rdev_state(struct device *dev, struct regulator_irq *h, + struct regulator_dev **rdev, int common_err, + int *rdev_err, int rdev_amount) +{ + int i; + + h->rdata.states = devm_kzalloc(dev, sizeof(*h->rdata.states) * + rdev_amount, GFP_KERNEL); + if (!h->rdata.states) + return -ENOMEM; + + h->rdata.num_states = rdev_amount; + h->rdata.data = h->desc.data; + + for (i = 0; i < rdev_amount; i++) { + h->rdata.states[i].possible_errs = common_err; + if (rdev_err) + h->rdata.states[i].possible_errs |= *rdev_err++; + h->rdata.states[i].rdev = *rdev++; + } + + return 0; +} + +static void init_rdev_errors(struct regulator_irq *h) +{ + int i; + + for (i = 0; i < h->rdata.num_states; i++) + if (h->rdata.states[i].possible_errs) + h->rdata.states[i].rdev->use_cached_err = true; +} + +/** + * regulator_irq_helper - register IRQ based regulator event/error notifier + * + * @dev: device providing the IRQs + * @d: IRQ helper descriptor. + * @irq: IRQ used to inform events/errors to be notified. + * @irq_flags: Extra IRQ flags to be OR'ed with the default + * IRQF_ONESHOT when requesting the (threaded) irq. + * @common_errs: Errors which can be flagged by this IRQ for all rdevs. + * When IRQ is re-enabled these errors will be cleared + * from all associated regulators. Use this instead of the + * per_rdev_errs if you use + * regulator_irq_map_event_simple() for event mapping. + * @per_rdev_errs: Optional error flag array describing errors specific + * for only some of the regulators. These errors will be + * or'ed with common errors. If this is given the array + * should contain rdev_amount flags. Can be set to NULL + * if there is no regulator specific error flags for this + * IRQ. + * @rdev: Array of pointers to regulators associated with this + * IRQ. + * @rdev_amount: Amount of regulators associated with this IRQ. + * + * Return: handle to irq_helper or an ERR_PTR() encoded error code. + */ +void *regulator_irq_helper(struct device *dev, + const struct regulator_irq_desc *d, int irq, + int irq_flags, int common_errs, int *per_rdev_errs, + struct regulator_dev **rdev, int rdev_amount) +{ + struct regulator_irq *h; + int ret; + + if (!rdev_amount || !d || !d->map_event || !d->name) + return ERR_PTR(-EINVAL); + + h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL); + if (!h) + return ERR_PTR(-ENOMEM); + + h->irq = irq; + h->desc = *d; + + ret = init_rdev_state(dev, h, rdev, common_errs, per_rdev_errs, + rdev_amount); + if (ret) + return ERR_PTR(ret); + + init_rdev_errors(h); + + if (h->desc.irq_off_ms) + INIT_DELAYED_WORK(&h->isr_work, regulator_notifier_isr_work); + + ret = request_threaded_irq(h->irq, NULL, regulator_notifier_isr, + IRQF_ONESHOT | irq_flags, h->desc.name, h); + if (ret) { + dev_err(dev, "Failed to request IRQ %d\n", irq); + + return ERR_PTR(ret); + } + + return h; +} +EXPORT_SYMBOL_GPL(regulator_irq_helper); + +/** + * regulator_irq_helper_cancel - drop IRQ based regulator event/error notifier + * + * @handle: Pointer to handle returned by a successful call to + * regulator_irq_helper(). Will be NULLed upon return. + * + * The associated IRQ is released and work is cancelled when the function + * returns. + */ +void regulator_irq_helper_cancel(void **handle) +{ + if (handle && *handle) { + struct regulator_irq *h = *handle; + + free_irq(h->irq, h); + if (h->desc.irq_off_ms) + cancel_delayed_work_sync(&h->isr_work); + + h = NULL; + } +} +EXPORT_SYMBOL_GPL(regulator_irq_helper_cancel); + +/** + * regulator_irq_map_event_simple - regulator IRQ notification for trivial IRQs + * + * @irq: Number of IRQ that occurred + * @rid: Information about the event IRQ indicates + * @dev_mask: mask indicating the regulator originating the IRQ + * + * Regulators whose IRQ has single, well defined purpose (always indicate + * exactly one event, and are relevant to exactly one regulator device) can + * use this function as their map_event callbac for their regulator IRQ + * notification helperk. Exactly one rdev and exactly one error (in + * "common_errs"-field) can be given at IRQ helper registration for + * regulator_irq_map_event_simple() to be viable. + */ +int regulator_irq_map_event_simple(int irq, struct regulator_irq_data *rid, + unsigned long *dev_mask) +{ + int err = rid->states[0].possible_errs; + + *dev_mask = 1; + /* + * This helper should only be used in a situation where the IRQ + * can indicate only one type of problem for one specific rdev. + * Something fishy is going on if we are having multiple rdevs or ERROR + * flags here. + */ + if (WARN_ON(rid->num_states != 1 || hweight32(err) != 1)) + return 0; + + rid->states[0].errors = err; + rid->states[0].notifs = regulator_err2notif(err); + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_irq_map_event_simple); + -- cgit v1.2.3