From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/max77686-regulator.c | 537 +++++++++++++++++++++++++++++++++ 1 file changed, 537 insertions(+) create mode 100644 drivers/regulator/max77686-regulator.c (limited to 'drivers/regulator/max77686-regulator.c') diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c new file mode 100644 index 000000000..55a07d3f3 --- /dev/null +++ b/drivers/regulator/max77686-regulator.c @@ -0,0 +1,537 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// max77686.c - Regulator driver for the Maxim 77686 +// +// Copyright (C) 2012 Samsung Electronics +// Chiwoong Byun +// Jonghwa Lee +// +// This driver is based on max8997.c + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX77686_LDO_MINUV 800000 +#define MAX77686_LDO_UVSTEP 50000 +#define MAX77686_LDO_LOW_MINUV 800000 +#define MAX77686_LDO_LOW_UVSTEP 25000 +#define MAX77686_BUCK_MINUV 750000 +#define MAX77686_BUCK_UVSTEP 50000 +#define MAX77686_BUCK_ENABLE_TIME 40 /* us */ +#define MAX77686_DVS_ENABLE_TIME 22 /* us */ +#define MAX77686_RAMP_DELAY 100000 /* uV/us */ +#define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */ +#define MAX77686_DVS_MINUV 600000 +#define MAX77686_DVS_UVSTEP 12500 + +/* + * Value for configuring buck[89] and LDO{20,21,22} as GPIO control. + * It is the same as 'off' for other regulators. + */ +#define MAX77686_GPIO_CONTROL 0x0 +/* + * Values used for configuring LDOs and bucks. + * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26 + */ +#define MAX77686_LDO_LOWPOWER 0x1 +/* + * On/off controlled by PWRREQ: + * - LDO2, 6-8, 10-12, 14-16 + * - buck[1234] + */ +#define MAX77686_OFF_PWRREQ 0x1 +/* Low power mode controlled by PWRREQ: All LDOs */ +#define MAX77686_LDO_LOWPOWER_PWRREQ 0x2 +/* Forcing low power mode: buck[234] */ +#define MAX77686_BUCK_LOWPOWER 0x2 +#define MAX77686_NORMAL 0x3 + +#define MAX77686_OPMODE_SHIFT 6 +#define MAX77686_OPMODE_BUCK234_SHIFT 4 +#define MAX77686_OPMODE_MASK 0x3 + +#define MAX77686_VSEL_MASK 0x3F +#define MAX77686_DVS_VSEL_MASK 0xFF + +#define MAX77686_RAMP_RATE_MASK 0xC0 + +#define MAX77686_REGULATORS MAX77686_REG_MAX +#define MAX77686_LDOS 26 + +struct max77686_data { + struct device *dev; + DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS); + + /* Array indexed by regulator id */ + unsigned int opmode[MAX77686_REGULATORS]; +}; + +static unsigned int max77686_get_opmode_shift(int id) +{ + switch (id) { + case MAX77686_BUCK1: + case MAX77686_BUCK5 ... MAX77686_BUCK9: + return 0; + case MAX77686_BUCK2 ... MAX77686_BUCK4: + return MAX77686_OPMODE_BUCK234_SHIFT; + default: + /* all LDOs */ + return MAX77686_OPMODE_SHIFT; + } +} + +/* + * When regulator is configured for GPIO control then it + * replaces "normal" mode. Any change from low power mode to normal + * should actually change to GPIO control. + * Map normal mode to proper value for such regulators. + */ +static unsigned int max77686_map_normal_mode(struct max77686_data *max77686, + int id) +{ + switch (id) { + case MAX77686_BUCK8: + case MAX77686_BUCK9: + case MAX77686_LDO20 ... MAX77686_LDO22: + if (test_bit(id, max77686->gpio_enabled)) + return MAX77686_GPIO_CONTROL; + } + + return MAX77686_NORMAL; +} + +/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */ +static int max77686_set_suspend_disable(struct regulator_dev *rdev) +{ + unsigned int val, shift; + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + int ret, id = rdev_get_id(rdev); + + shift = max77686_get_opmode_shift(id); + val = MAX77686_OFF_PWRREQ; + + ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val << shift); + if (ret) + return ret; + + max77686->opmode[id] = val; + return 0; +} + +/* Some LDOs supports [LPM/Normal]ON mode during suspend state */ +static int max77686_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + unsigned int val; + int ret, id = rdev_get_id(rdev); + + /* BUCK[5-9] doesn't support this feature */ + if (id >= MAX77686_BUCK5) + return 0; + + switch (mode) { + case REGULATOR_MODE_IDLE: /* ON in LP Mode */ + val = MAX77686_LDO_LOWPOWER_PWRREQ; + break; + case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ + val = max77686_map_normal_mode(max77686, id); + break; + default: + pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", + rdev->desc->name, mode); + return -EINVAL; + } + + ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, + val << MAX77686_OPMODE_SHIFT); + if (ret) + return ret; + + max77686->opmode[id] = val; + return 0; +} + +/* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */ +static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + unsigned int val; + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + int ret, id = rdev_get_id(rdev); + + switch (mode) { + case REGULATOR_MODE_STANDBY: /* switch off */ + val = MAX77686_OFF_PWRREQ; + break; + case REGULATOR_MODE_IDLE: /* ON in LP Mode */ + val = MAX77686_LDO_LOWPOWER_PWRREQ; + break; + case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ + val = max77686_map_normal_mode(max77686, id); + break; + default: + pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", + rdev->desc->name, mode); + return -EINVAL; + } + + ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, + val << MAX77686_OPMODE_SHIFT); + if (ret) + return ret; + + max77686->opmode[id] = val; + return 0; +} + +static int max77686_enable(struct regulator_dev *rdev) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + unsigned int shift; + int id = rdev_get_id(rdev); + + shift = max77686_get_opmode_shift(id); + + if (max77686->opmode[id] == MAX77686_OFF_PWRREQ) + max77686->opmode[id] = max77686_map_normal_mode(max77686, id); + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, + max77686->opmode[id] << shift); +} + +static int max77686_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct max77686_data *max77686 = config->driver_data; + int ret; + + switch (desc->id) { + case MAX77686_BUCK8: + case MAX77686_BUCK9: + case MAX77686_LDO20 ... MAX77686_LDO22: + config->ena_gpiod = fwnode_gpiod_get_index( + of_fwnode_handle(np), + "maxim,ena", + 0, + GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE, + "max77686-regulator"); + if (IS_ERR(config->ena_gpiod)) + config->ena_gpiod = NULL; + break; + default: + return 0; + } + + if (config->ena_gpiod) { + set_bit(desc->id, max77686->gpio_enabled); + + ret = regmap_update_bits(config->regmap, desc->enable_reg, + desc->enable_mask, + MAX77686_GPIO_CONTROL); + if (ret) { + gpiod_put(config->ena_gpiod); + config->ena_gpiod = NULL; + } + } + + return 0; +} + +static const unsigned int max77686_buck_dvs_ramp_table[] = { + 13750, 27500, 55000, 100000 +}; + +static const struct regulator_ops max77686_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77686_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_mode = max77686_set_suspend_mode, +}; + +static const struct regulator_ops max77686_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77686_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_mode = max77686_ldo_set_suspend_mode, + .set_suspend_disable = max77686_set_suspend_disable, +}; + +static const struct regulator_ops max77686_buck1_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77686_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_disable = max77686_set_suspend_disable, +}; + +static const struct regulator_ops max77686_buck_dvs_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77686_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = regulator_set_ramp_delay_regmap, + .set_suspend_disable = max77686_set_suspend_disable, +}; + +#define regulator_desc_ldo(num) { \ + .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ + .of_parse_cb = max77686_of_parse_cb, \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_LDO_MINUV, \ + .uV_step = MAX77686_LDO_UVSTEP, \ + .ramp_delay = MAX77686_RAMP_DELAY, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77686_OPMODE_MASK \ + << MAX77686_OPMODE_SHIFT, \ +} +#define regulator_desc_lpm_ldo(num) { \ + .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_LDO_MINUV, \ + .uV_step = MAX77686_LDO_UVSTEP, \ + .ramp_delay = MAX77686_RAMP_DELAY, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77686_OPMODE_MASK \ + << MAX77686_OPMODE_SHIFT, \ +} +#define regulator_desc_ldo_low(num) { \ + .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_LDO_LOW_MINUV, \ + .uV_step = MAX77686_LDO_LOW_UVSTEP, \ + .ramp_delay = MAX77686_RAMP_DELAY, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77686_OPMODE_MASK \ + << MAX77686_OPMODE_SHIFT, \ +} +#define regulator_desc_ldo1_low(num) { \ + .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_LDO_LOW_MINUV, \ + .uV_step = MAX77686_LDO_LOW_UVSTEP, \ + .ramp_delay = MAX77686_RAMP_DELAY, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77686_OPMODE_MASK \ + << MAX77686_OPMODE_SHIFT, \ +} +#define regulator_desc_buck(num) { \ + .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ + .of_parse_cb = max77686_of_parse_cb, \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_BUCK_MINUV, \ + .uV_step = MAX77686_BUCK_UVSTEP, \ + .ramp_delay = MAX77686_RAMP_DELAY, \ + .enable_time = MAX77686_BUCK_ENABLE_TIME, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \ + .enable_mask = MAX77686_OPMODE_MASK, \ +} +#define regulator_desc_buck1(num) { \ + .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_buck1_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_BUCK_MINUV, \ + .uV_step = MAX77686_BUCK_UVSTEP, \ + .ramp_delay = MAX77686_RAMP_DELAY, \ + .enable_time = MAX77686_BUCK_ENABLE_TIME, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_BUCK1OUT, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_BUCK1CTRL, \ + .enable_mask = MAX77686_OPMODE_MASK, \ +} +#define regulator_desc_buck_dvs(num) { \ + .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_buck_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_DVS_MINUV, \ + .uV_step = MAX77686_DVS_UVSTEP, \ + .ramp_delay = MAX77686_DVS_RAMP_DELAY, \ + .enable_time = MAX77686_DVS_ENABLE_TIME, \ + .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \ + .vsel_mask = MAX77686_DVS_VSEL_MASK, \ + .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \ + .enable_mask = MAX77686_OPMODE_MASK \ + << MAX77686_OPMODE_BUCK234_SHIFT, \ + .ramp_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \ + .ramp_mask = MAX77686_RAMP_RATE_MASK, \ + .ramp_delay_table = max77686_buck_dvs_ramp_table, \ + .n_ramp_values = ARRAY_SIZE(max77686_buck_dvs_ramp_table), \ +} + +static const struct regulator_desc regulators[] = { + regulator_desc_ldo1_low(1), + regulator_desc_ldo_low(2), + regulator_desc_ldo(3), + regulator_desc_ldo(4), + regulator_desc_ldo(5), + regulator_desc_ldo_low(6), + regulator_desc_ldo_low(7), + regulator_desc_ldo_low(8), + regulator_desc_ldo(9), + regulator_desc_lpm_ldo(10), + regulator_desc_lpm_ldo(11), + regulator_desc_lpm_ldo(12), + regulator_desc_ldo(13), + regulator_desc_lpm_ldo(14), + regulator_desc_ldo_low(15), + regulator_desc_lpm_ldo(16), + regulator_desc_ldo(17), + regulator_desc_ldo(18), + regulator_desc_ldo(19), + regulator_desc_ldo(20), + regulator_desc_ldo(21), + regulator_desc_ldo(22), + regulator_desc_ldo(23), + regulator_desc_ldo(24), + regulator_desc_ldo(25), + regulator_desc_ldo(26), + regulator_desc_buck1(1), + regulator_desc_buck_dvs(2), + regulator_desc_buck_dvs(3), + regulator_desc_buck_dvs(4), + regulator_desc_buck(5), + regulator_desc_buck(6), + regulator_desc_buck(7), + regulator_desc_buck(8), + regulator_desc_buck(9), +}; + +static int max77686_pmic_probe(struct platform_device *pdev) +{ + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max77686_data *max77686; + int i; + struct regulator_config config = { }; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data), + GFP_KERNEL); + if (!max77686) + return -ENOMEM; + + max77686->dev = &pdev->dev; + config.dev = iodev->dev; + config.regmap = iodev->regmap; + config.driver_data = max77686; + platform_set_drvdata(pdev, max77686); + + for (i = 0; i < MAX77686_REGULATORS; i++) { + struct regulator_dev *rdev; + int id = regulators[i].id; + + max77686->opmode[id] = MAX77686_NORMAL; + rdev = devm_regulator_register(&pdev->dev, + ®ulators[i], &config); + if (IS_ERR(rdev)) { + int ret = PTR_ERR(rdev); + dev_err(&pdev->dev, + "regulator init failed for %d: %d\n", i, ret); + return ret; + } + } + + return 0; +} + +static const struct platform_device_id max77686_pmic_id[] = { + {"max77686-pmic", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77686_pmic_id); + +static struct platform_driver max77686_pmic_driver = { + .driver = { + .name = "max77686-pmic", + }, + .probe = max77686_pmic_probe, + .id_table = max77686_pmic_id, +}; + +module_platform_driver(max77686_pmic_driver); + +MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver"); +MODULE_AUTHOR("Chiwoong Byun "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3