From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/max8907-regulator.c | 396 ++++++++++++++++++++++++++++++++++ 1 file changed, 396 insertions(+) create mode 100644 drivers/regulator/max8907-regulator.c (limited to 'drivers/regulator/max8907-regulator.c') diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c new file mode 100644 index 000000000..1a6fd68f3 --- /dev/null +++ b/drivers/regulator/max8907-regulator.c @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * max8907-regulator.c -- support regulators in max8907 + * + * Copyright (C) 2010 Gyungoh Yoo + * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * Portions based on drivers/regulator/tps65910-regulator.c, + * Copyright 2010 Texas Instruments Inc. + * Author: Graeme Gregory + * Author: Jorge Eduardo Candelaria + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX8907_II2RR_VERSION_MASK 0xF0 +#define MAX8907_II2RR_VERSION_REV_A 0x00 +#define MAX8907_II2RR_VERSION_REV_B 0x10 +#define MAX8907_II2RR_VERSION_REV_C 0x30 + +struct max8907_regulator { + struct regulator_desc desc[MAX8907_NUM_REGULATORS]; +}; + +#define REG_MBATT() \ + [MAX8907_MBATT] = { \ + .name = "MBATT", \ + .supply_name = "mbatt", \ + .id = MAX8907_MBATT, \ + .ops = &max8907_mbatt_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +#define REG_LDO(ids, supply, base, min, max, step) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &max8907_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + MAX8907_VOUT, \ + .vsel_mask = 0x3f, \ + .enable_reg = (base) + MAX8907_CTL, \ + .enable_mask = MAX8907_MASK_LDO_EN, \ + } + +#define REG_FIXED(ids, supply, voltage) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = 1, \ + .ops = &max8907_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (voltage), \ + } + +#define REG_OUT5V(ids, supply, base, voltage) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = 1, \ + .ops = &max8907_out5v_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (voltage), \ + .enable_reg = (base), \ + .enable_mask = MAX8907_MASK_OUT5V_EN, \ + } + +#define REG_BBAT(ids, supply, base, min, max, step) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &max8907_bbat_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base), \ + .vsel_mask = MAX8907_MASK_VBBATTCV, \ + } + +#define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \ + 750000, 3900000, 50000) +#define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \ + 650000, 2225000, 25000) + +static const struct regulator_ops max8907_mbatt_ops = { +}; + +static const struct regulator_ops max8907_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_ops max8907_ldo_hwctl_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops max8907_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, +}; + +static const struct regulator_ops max8907_out5v_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_ops max8907_out5v_hwctl_ops = { + .list_voltage = regulator_list_voltage_linear, +}; + +static const struct regulator_ops max8907_bbat_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_desc max8907_regulators[] = { + REG_MBATT(), + REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000), + REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500), + REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000), + LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1), + LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2), + LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3), + LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4), + LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5), + LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6), + LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7), + LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8), + LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9), + LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10), + LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11), + LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12), + LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13), + LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14), + LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15), + LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16), + LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17), + LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18), + LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19), + LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20), + REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000), + REG_OUT5V(OUT33V, "mbatt", MAX8907_REG_OUT33VEN, 3300000), + REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG, + 2400000, 3000000, 200000), + REG_FIXED(SDBY, "MBATT", 1200000), + REG_FIXED(VRTC, "MBATT", 3300000), +}; + +#ifdef CONFIG_OF + +#define MATCH(_name, _id) \ + [MAX8907_##_id] = { \ + .name = #_name, \ + .driver_data = (void *)&max8907_regulators[MAX8907_##_id], \ + } + +static struct of_regulator_match max8907_matches[] = { + MATCH(mbatt, MBATT), + MATCH(sd1, SD1), + MATCH(sd2, SD2), + MATCH(sd3, SD3), + MATCH(ldo1, LDO1), + MATCH(ldo2, LDO2), + MATCH(ldo3, LDO3), + MATCH(ldo4, LDO4), + MATCH(ldo5, LDO5), + MATCH(ldo6, LDO6), + MATCH(ldo7, LDO7), + MATCH(ldo8, LDO8), + MATCH(ldo9, LDO9), + MATCH(ldo10, LDO10), + MATCH(ldo11, LDO11), + MATCH(ldo12, LDO12), + MATCH(ldo13, LDO13), + MATCH(ldo14, LDO14), + MATCH(ldo15, LDO15), + MATCH(ldo16, LDO16), + MATCH(ldo17, LDO17), + MATCH(ldo18, LDO18), + MATCH(ldo19, LDO19), + MATCH(ldo20, LDO20), + MATCH(out5v, OUT5V), + MATCH(out33v, OUT33V), + MATCH(bbat, BBAT), + MATCH(sdby, SDBY), + MATCH(vrtc, VRTC), +}; + +static int max8907_regulator_parse_dt(struct platform_device *pdev) +{ + struct device_node *np, *regulators; + int ret; + + np = pdev->dev.parent->of_node; + if (!np) + return 0; + + regulators = of_get_child_by_name(np, "regulators"); + if (!regulators) { + dev_err(&pdev->dev, "regulators node not found\n"); + return -EINVAL; + } + + ret = of_regulator_match(&pdev->dev, regulators, max8907_matches, + ARRAY_SIZE(max8907_matches)); + of_node_put(regulators); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", + ret); + return ret; + } + + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return max8907_matches[index].init_data; +} + +static inline struct device_node *match_of_node(int index) +{ + return max8907_matches[index].of_node; +} +#else +static int max8907_regulator_parse_dt(struct platform_device *pdev) +{ + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return NULL; +} + +static inline struct device_node *match_of_node(int index) +{ + return NULL; +} +#endif + +static int max8907_regulator_probe(struct platform_device *pdev) +{ + struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent); + struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev); + int ret; + struct max8907_regulator *pmic; + unsigned int val; + int i; + struct regulator_config config = {}; + struct regulator_init_data *idata; + const char *mbatt_rail_name = NULL; + + ret = max8907_regulator_parse_dt(pdev); + if (ret) + return ret; + + pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + platform_set_drvdata(pdev, pmic); + + memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc)); + + /* Backwards compatibility with MAX8907B; SD1 uses different voltages */ + ret = regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val); + if (ret) + return ret; + + if ((val & MAX8907_II2RR_VERSION_MASK) == + MAX8907_II2RR_VERSION_REV_B) { + pmic->desc[MAX8907_SD1].min_uV = 637500; + pmic->desc[MAX8907_SD1].uV_step = 12500; + pmic->desc[MAX8907_SD1].n_voltages = + (1425000 - 637500) / 12500 + 1; + } + + for (i = 0; i < MAX8907_NUM_REGULATORS; i++) { + struct regulator_dev *rdev; + + config.dev = pdev->dev.parent; + if (pdata) + idata = pdata->init_data[i]; + else + idata = match_init_data(i); + config.init_data = idata; + config.driver_data = pmic; + config.regmap = max8907->regmap_gen; + config.of_node = match_of_node(i); + + switch (pmic->desc[i].id) { + case MAX8907_MBATT: + if (idata && idata->constraints.name) + mbatt_rail_name = idata->constraints.name; + else + mbatt_rail_name = pmic->desc[i].name; + break; + case MAX8907_BBAT: + case MAX8907_SDBY: + case MAX8907_VRTC: + idata->supply_regulator = mbatt_rail_name; + break; + } + + if (pmic->desc[i].ops == &max8907_ldo_ops) { + ret = regmap_read(config.regmap, pmic->desc[i].enable_reg, + &val); + if (ret) + return ret; + + if ((val & MAX8907_MASK_LDO_SEQ) != + MAX8907_MASK_LDO_SEQ) + pmic->desc[i].ops = &max8907_ldo_hwctl_ops; + } else if (pmic->desc[i].ops == &max8907_out5v_ops) { + ret = regmap_read(config.regmap, pmic->desc[i].enable_reg, + &val); + if (ret) + return ret; + + if ((val & (MAX8907_MASK_OUT5V_VINEN | + MAX8907_MASK_OUT5V_ENSRC)) != + MAX8907_MASK_OUT5V_ENSRC) + pmic->desc[i].ops = &max8907_out5v_hwctl_ops; + } + + rdev = devm_regulator_register(&pdev->dev, + &pmic->desc[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + pmic->desc[i].name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver max8907_regulator_driver = { + .driver = { + .name = "max8907-regulator", + }, + .probe = max8907_regulator_probe, +}; + +static int __init max8907_regulator_init(void) +{ + return platform_driver_register(&max8907_regulator_driver); +} + +subsys_initcall(max8907_regulator_init); + +static void __exit max8907_reg_exit(void) +{ + platform_driver_unregister(&max8907_regulator_driver); +} + +module_exit(max8907_reg_exit); + +MODULE_DESCRIPTION("MAX8907 regulator driver"); +MODULE_AUTHOR("Gyungoh Yoo "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:max8907-regulator"); -- cgit v1.2.3