From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/mt6332-regulator.c | 422 +++++++++++++++++++++++++++++++++++ 1 file changed, 422 insertions(+) create mode 100644 drivers/regulator/mt6332-regulator.c (limited to 'drivers/regulator/mt6332-regulator.c') diff --git a/drivers/regulator/mt6332-regulator.c b/drivers/regulator/mt6332-regulator.c new file mode 100644 index 000000000..77a27d812 --- /dev/null +++ b/drivers/regulator/mt6332-regulator.c @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2022 Collabora Ltd. +// Author: AngeloGioacchino Del Regno +// +// Based on mt6323-regulator.c, +// Copyright (c) 2016 MediaTek Inc. +// + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MT6332_LDO_MODE_NORMAL 0 +#define MT6332_LDO_MODE_LP 1 + +/* + * MT6332 regulators information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + * @status_reg: Register for regulator enable status where qi unavailable + * @status_mask: Mask for querying regulator enable status + */ +struct mt6332_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; + u32 status_reg; + u32 status_mask; +}; + +#define MT6332_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6332_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6332_buck_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6332_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ + .status_mask = 0, \ +} + +#define MT6332_LDO_LINEAR(match, vreg, min, max, step, volt_ranges, \ + enreg, vosel, vosel_mask, voselon, \ + vosel_ctrl, _modeset_reg, _modeset_mask) \ +[MT6332_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6332_ldo_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6332_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(15), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ + .status_mask = 0, \ +} + +#define MT6332_LDO_AO(match, vreg, ldo_volt_table, vosel, vosel_mask) \ +[MT6332_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6332_volt_table_ao_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6332_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + }, \ +} + +#define MT6332_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6332_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6332_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6332_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ + .status_mask = 0, \ +} + +#define MT6332_REG_FIXED(match, vreg, enreg, enbit, qibit, volt, stbit) \ +[MT6332_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6332_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6332_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(qibit), \ + .status_reg = MT6332_EN_STATUS0, \ + .status_mask = BIT(stbit), \ +} + +static const struct linear_range boost_volt_range[] = { + REGULATOR_LINEAR_RANGE(3500000, 0, 0x7f, 31250), +}; + +static const struct linear_range buck_volt_range[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct linear_range buck_pa_volt_range[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const struct linear_range buck_rf_volt_range[] = { + REGULATOR_LINEAR_RANGE(1050000, 0, 0x7f, 9375), +}; + +static const unsigned int ldo_volt_table1[] = { + 2800000, 3000000, 0, 3200000 +}; + +static const unsigned int ldo_volt_table2[] = { + 1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000, +}; + +static int mt6332_get_status(struct regulator_dev *rdev) +{ + struct mt6332_regulator_info *info = rdev_get_drvdata(rdev); + u32 reg, en_mask, regval; + int ret; + + if (info->qi > 0) { + reg = info->desc.enable_reg; + en_mask = info->qi; + } else { + reg = info->status_reg; + en_mask = info->status_mask; + } + + ret = regmap_read(rdev->regmap, reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & en_mask) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6332_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct mt6332_regulator_info *info = rdev_get_drvdata(rdev); + int val; + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6332_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6332_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + return regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); +} + +static unsigned int mt6332_ldo_get_mode(struct regulator_dev *rdev) +{ + struct mt6332_regulator_info *info = rdev_get_drvdata(rdev); + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + return (val & BIT(0)) ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; +} + +static const struct regulator_ops mt6332_buck_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6332_get_status, +}; + +static const struct regulator_ops mt6332_ldo_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6332_get_status, + .set_mode = mt6332_ldo_set_mode, + .get_mode = mt6332_ldo_get_mode, +}; + +static const struct regulator_ops mt6332_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6332_get_status, + .set_mode = mt6332_ldo_set_mode, + .get_mode = mt6332_ldo_get_mode, +}; + +static const struct regulator_ops mt6332_volt_table_ao_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static const struct regulator_ops mt6332_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6332_get_status, +}; + +/* The array is indexed by id(MT6332_ID_XXX) */ +static struct mt6332_regulator_info mt6332_regulators[] = { + MT6332_BUCK("buck-vdram", VDRAM, 700000, 1493750, 6250, buck_volt_range, + MT6332_EN_STATUS0, MT6332_VDRAM_CON11, GENMASK(6, 0), + MT6332_VDRAM_CON12, MT6332_VDRAM_CON7), + MT6332_BUCK("buck-vdvfs2", VDVFS2, 700000, 1312500, 6250, buck_volt_range, + MT6332_VDVFS2_CON9, MT6332_VDVFS2_CON11, GENMASK(6, 0), + MT6332_VDVFS2_CON12, MT6332_VDVFS2_CON7), + MT6332_BUCK("buck-vpa", VPA, 500000, 3400000, 50000, buck_pa_volt_range, + MT6332_VPA_CON9, MT6332_VPA_CON11, GENMASK(5, 0), + MT6332_VPA_CON12, MT6332_VPA_CON7), + MT6332_BUCK("buck-vrf18a", VRF1, 1050000, 2240625, 9375, buck_rf_volt_range, + MT6332_VRF1_CON9, MT6332_VRF1_CON11, GENMASK(6, 0), + MT6332_VRF1_CON12, MT6332_VRF1_CON7), + MT6332_BUCK("buck-vrf18b", VRF2, 1050000, 2240625, 9375, buck_rf_volt_range, + MT6332_VRF2_CON9, MT6332_VRF2_CON11, GENMASK(6, 0), + MT6332_VRF2_CON12, MT6332_VRF2_CON7), + MT6332_BUCK("buck-vsbst", VSBST, 3500000, 7468750, 31250, boost_volt_range, + MT6332_VSBST_CON8, MT6332_VSBST_CON12, GENMASK(6, 0), + MT6332_VSBST_CON13, MT6332_VSBST_CON8), + MT6332_LDO("ldo-vauxb32", VAUXB32, ldo_volt_table1, MT6332_LDO_CON1, 10, + MT6332_LDO_CON9, GENMASK(6, 5), MT6332_LDO_CON1, GENMASK(1, 0)), + MT6332_REG_FIXED("ldo-vbif28", VBIF28, MT6332_LDO_CON2, 10, 0, 2800000, 1), + MT6332_REG_FIXED("ldo-vusb33", VUSB33, MT6332_LDO_CON3, 10, 0, 3300000, 2), + MT6332_LDO_LINEAR("ldo-vsram", VSRAM_DVFS2, 700000, 1493750, 6250, buck_volt_range, + MT6332_EN_STATUS0, MT6332_LDO_CON8, GENMASK(15, 9), + MT6332_VDVFS2_CON23, MT6332_VDVFS2_CON22, + MT6332_LDO_CON5, GENMASK(1, 0)), + MT6332_LDO_AO("ldo-vdig18", VDIG18, ldo_volt_table2, MT6332_LDO_CON12, GENMASK(11, 9)), +}; + +static int mt6332_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6332_ID_VREG_MAX; i++) { + if (mt6332_regulators[i].vselctrl_reg) { + if (regmap_read(mt6332->regmap, + mt6332_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6332_regulators[i].vselctrl_mask) { + mt6332_regulators[i].desc.vsel_reg = + mt6332_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6332_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6332_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6332->regmap, MT6332_HWCID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + reg_value &= GENMASK(7, 0); + + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + /* + * ChipID 0x10 is "MT6332 E1", has a different voltage table and + * it's currently not supported in this driver. Upon detection of + * this ID, refuse to register the regulators, as we will wrongly + * interpret the VSEL for this revision, potentially overvolting + * some device. + */ + if (reg_value == 0x10) { + dev_err(&pdev->dev, "Chip version not supported. Bailing out.\n"); + return -EINVAL; + } + + for (i = 0; i < MT6332_ID_VREG_MAX; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6332_regulators[i]; + config.regmap = mt6332->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6332_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6332_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6332_platform_ids[] = { + {"mt6332-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6332_platform_ids); + +static struct platform_driver mt6332_regulator_driver = { + .driver = { + .name = "mt6332-regulator", + }, + .probe = mt6332_regulator_probe, + .id_table = mt6332_platform_ids, +}; + +module_platform_driver(mt6332_regulator_driver); + +MODULE_AUTHOR("AngeloGioacchino Del Regno "); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6332 PMIC"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3