From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/rt5120-regulator.c | 420 +++++++++++++++++++++++++++++++++++ 1 file changed, 420 insertions(+) create mode 100644 drivers/regulator/rt5120-regulator.c (limited to 'drivers/regulator/rt5120-regulator.c') diff --git a/drivers/regulator/rt5120-regulator.c b/drivers/regulator/rt5120-regulator.c new file mode 100644 index 000000000..8173ede09 --- /dev/null +++ b/drivers/regulator/rt5120-regulator.c @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RT5120_REG_PGSTAT 0x03 +#define RT5120_REG_CH1VID 0x06 +#define RT5120_REG_CH1SLPVID 0x07 +#define RT5120_REG_ENABLE 0x08 +#define RT5120_REG_MODECTL 0x09 +#define RT5120_REG_UVOVPROT 0x0A +#define RT5120_REG_SLPCTL 0x0C +#define RT5120_REG_INTSTAT 0x1E +#define RT5120_REG_DISCHG 0x1F + +#define RT5120_OUTPG_MASK(rid) BIT(rid + 1) +#define RT5120_OUTUV_MASK(rid) BIT(rid + 9) +#define RT5120_OUTOV_MASK(rid) BIT(rid + 16) +#define RT5120_CH1VID_MASK GENMASK(6, 0) +#define RT5120_RIDEN_MASK(rid) BIT(rid + 1) +#define RT5120_RADEN_MASK(rid) BIT(rid) +#define RT5120_FPWM_MASK(rid) BIT(rid + 1) +#define RT5120_UVHICCUP_MASK BIT(1) +#define RT5120_OVHICCUP_MASK BIT(0) +#define RT5120_HOTDIE_MASK BIT(1) + +#define RT5120_BUCK1_MINUV 600000 +#define RT5120_BUCK1_MAXUV 1393750 +#define RT5120_BUCK1_STEPUV 6250 +#define RT5120_BUCK1_NUM_VOLT 0x80 + +#define RT5120_AUTO_MODE 0 +#define RT5120_FPWM_MODE 1 + +enum { + RT5120_REGULATOR_BUCK1 = 0, + RT5120_REGULATOR_BUCK2, + RT5120_REGULATOR_BUCK3, + RT5120_REGULATOR_BUCK4, + RT5120_REGULATOR_LDO, + RT5120_REGULATOR_EXTEN, + RT5120_MAX_REGULATOR +}; + +struct rt5120_priv { + struct device *dev; + struct regmap *regmap; + struct regulator_desc rdesc[RT5120_MAX_REGULATOR]; +}; + +static int rt5120_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int rid = rdev_get_id(rdev); + unsigned int mask = RT5120_FPWM_MASK(rid), val; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + val = 0; + break; + case REGULATOR_MODE_FAST: + val = RT5120_FPWM_MASK(rid); + break; + default: + return -EINVAL; + } + + return regmap_update_bits(regmap, RT5120_REG_MODECTL, mask, val); +} + +static unsigned int rt5120_buck_get_mode(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int ret, rid = rdev_get_id(rdev); + unsigned int val; + + ret = regmap_read(regmap, RT5120_REG_MODECTL, &val); + if (ret) + return REGULATOR_MODE_INVALID; + + if (val & RT5120_FPWM_MASK(rid)) + return REGULATOR_MODE_FAST; + + return REGULATOR_MODE_NORMAL; +} + +static int rt5120_regulator_get_error_flags(struct regulator_dev *rdev, + unsigned int *flags) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + unsigned int stat, hd_stat, cur_flags = 0; + int rid = rdev_get_id(rdev), ret; + + /* + * reg 0x03/0x04/0x05 to indicate PG/UV/OV + * use block read to descrease I/O xfer time + */ + ret = regmap_raw_read(regmap, RT5120_REG_PGSTAT, &stat, 3); + if (ret) + return ret; + + ret = regmap_read(regmap, RT5120_REG_INTSTAT, &hd_stat); + if (ret) + return ret; + + if (!(stat & RT5120_OUTPG_MASK(rid))) { + if (stat & RT5120_OUTUV_MASK(rid)) + cur_flags |= REGULATOR_ERROR_UNDER_VOLTAGE; + + if (stat & RT5120_OUTOV_MASK(rid)) + cur_flags |= REGULATOR_ERROR_REGULATION_OUT; + } + + if (hd_stat & RT5120_HOTDIE_MASK) + cur_flags |= REGULATOR_ERROR_OVER_TEMP; + + *flags = cur_flags; + return 0; +} + +static int rt5120_buck1_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int sel; + + if (uV < RT5120_BUCK1_MINUV || uV > RT5120_BUCK1_MAXUV) + return -EINVAL; + + sel = (uV - RT5120_BUCK1_MINUV) / RT5120_BUCK1_STEPUV; + return regmap_write(regmap, RT5120_REG_CH1SLPVID, sel); +} + +static int rt5120_regulator_set_suspend_enable(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int rid = rdev_get_id(rdev); + unsigned int mask = RT5120_RIDEN_MASK(rid); + + return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, mask); +} + +static int rt5120_regulator_set_suspend_disable(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int rid = rdev_get_id(rdev); + unsigned int mask = RT5120_RIDEN_MASK(rid); + + return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, 0); +} + +static const struct regulator_ops rt5120_buck1_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_mode = rt5120_buck_set_mode, + .get_mode = rt5120_buck_get_mode, + .get_error_flags = rt5120_regulator_get_error_flags, + .set_suspend_voltage = rt5120_buck1_set_suspend_voltage, + .set_suspend_enable = rt5120_regulator_set_suspend_enable, + .set_suspend_disable = rt5120_regulator_set_suspend_disable, +}; + +static const struct regulator_ops rt5120_buck234_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_mode = rt5120_buck_set_mode, + .get_mode = rt5120_buck_get_mode, + .get_error_flags = rt5120_regulator_get_error_flags, + .set_suspend_enable = rt5120_regulator_set_suspend_enable, + .set_suspend_disable = rt5120_regulator_set_suspend_disable, +}; + +static const struct regulator_ops rt5120_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .get_error_flags = rt5120_regulator_get_error_flags, + .set_suspend_enable = rt5120_regulator_set_suspend_enable, + .set_suspend_disable = rt5120_regulator_set_suspend_disable, +}; + +static const struct regulator_ops rt5120_exten_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_suspend_enable = rt5120_regulator_set_suspend_enable, + .set_suspend_disable = rt5120_regulator_set_suspend_disable, +}; + +static unsigned int rt5120_buck_of_map_mode(unsigned int mode) +{ + switch (mode) { + case RT5120_AUTO_MODE: + return REGULATOR_MODE_NORMAL; + case RT5120_FPWM_MODE: + return REGULATOR_MODE_FAST; + default: + return REGULATOR_MODE_INVALID; + } +} + +static void rt5120_fillin_regulator_desc(struct regulator_desc *desc, int rid) +{ + static const char * const name[] = { + "buck1", "buck2", "buck3", "buck4", "ldo", "exten" }; + static const char * const sname[] = { + "vin1", "vin2", "vin3", "vin4", "vinldo", NULL }; + + /* Common regulator property */ + desc->name = name[rid]; + desc->supply_name = sname[rid]; + desc->owner = THIS_MODULE; + desc->type = REGULATOR_VOLTAGE; + desc->id = rid; + desc->enable_reg = RT5120_REG_ENABLE; + desc->enable_mask = RT5120_RIDEN_MASK(rid); + desc->active_discharge_reg = RT5120_REG_DISCHG; + desc->active_discharge_mask = RT5120_RADEN_MASK(rid); + desc->active_discharge_on = RT5120_RADEN_MASK(rid); + /* Config n_voltages to 1 for all*/ + desc->n_voltages = 1; + + /* Only buck support mode change */ + if (rid >= RT5120_REGULATOR_BUCK1 && rid <= RT5120_REGULATOR_BUCK4) + desc->of_map_mode = rt5120_buck_of_map_mode; + + /* RID specific property init */ + switch (rid) { + case RT5120_REGULATOR_BUCK1: + /* Only buck1 support voltage change by I2C */ + desc->n_voltages = RT5120_BUCK1_NUM_VOLT; + desc->min_uV = RT5120_BUCK1_MINUV; + desc->uV_step = RT5120_BUCK1_STEPUV; + desc->vsel_reg = RT5120_REG_CH1VID, + desc->vsel_mask = RT5120_CH1VID_MASK, + desc->ops = &rt5120_buck1_ops; + break; + case RT5120_REGULATOR_BUCK2 ... RT5120_REGULATOR_BUCK4: + desc->ops = &rt5120_buck234_ops; + break; + case RT5120_REGULATOR_LDO: + desc->ops = &rt5120_ldo_ops; + break; + default: + desc->ops = &rt5120_exten_ops; + } +} + +static int rt5120_of_parse_cb(struct rt5120_priv *priv, int rid, + struct of_regulator_match *match) +{ + struct regulator_desc *desc = priv->rdesc + rid; + struct regulator_init_data *init_data = match->init_data; + + if (!init_data || rid == RT5120_REGULATOR_BUCK1) + return 0; + + if (init_data->constraints.min_uV != init_data->constraints.max_uV) { + dev_err(priv->dev, "Variable voltage for fixed regulator\n"); + return -EINVAL; + } + + desc->fixed_uV = init_data->constraints.min_uV; + return 0; +} + +static struct of_regulator_match rt5120_regu_match[RT5120_MAX_REGULATOR] = { + [RT5120_REGULATOR_BUCK1] = { .name = "buck1", }, + [RT5120_REGULATOR_BUCK2] = { .name = "buck2", }, + [RT5120_REGULATOR_BUCK3] = { .name = "buck3", }, + [RT5120_REGULATOR_BUCK4] = { .name = "buck4", }, + [RT5120_REGULATOR_LDO] = { .name = "ldo", }, + [RT5120_REGULATOR_EXTEN] = { .name = "exten", } +}; + +static int rt5120_parse_regulator_dt_data(struct rt5120_priv *priv) +{ + struct device *dev = priv->dev->parent; + struct device_node *reg_node; + int i, ret; + + for (i = 0; i < RT5120_MAX_REGULATOR; i++) { + rt5120_fillin_regulator_desc(priv->rdesc + i, i); + + rt5120_regu_match[i].desc = priv->rdesc + i; + } + + reg_node = of_get_child_by_name(dev->of_node, "regulators"); + if (!reg_node) { + dev_err(priv->dev, "Couldn't find 'regulators' node\n"); + return -ENODEV; + } + + ret = of_regulator_match(priv->dev, reg_node, rt5120_regu_match, + ARRAY_SIZE(rt5120_regu_match)); + + of_node_put(reg_node); + + if (ret < 0) { + dev_err(priv->dev, + "Error parsing regulator init data (%d)\n", ret); + return ret; + } + + for (i = 0; i < RT5120_MAX_REGULATOR; i++) { + ret = rt5120_of_parse_cb(priv, i, rt5120_regu_match + i); + if (ret) { + dev_err(priv->dev, "Failed in [%d] of_passe_cb\n", i); + return ret; + } + } + + return 0; +} + +static int rt5120_device_property_init(struct rt5120_priv *priv) +{ + struct device *dev = priv->dev->parent; + struct device_node *np = dev->of_node; + bool prot_enable; + unsigned int prot_enable_val = 0; + + /* Assign UV/OV HW protection behavior */ + prot_enable = of_property_read_bool(np, + "richtek,enable-undervolt-hiccup"); + if (prot_enable) + prot_enable_val |= RT5120_UVHICCUP_MASK; + + prot_enable = of_property_read_bool(np, + "richtek,enable-overvolt-hiccup"); + if (prot_enable) + prot_enable_val |= RT5120_OVHICCUP_MASK; + + return regmap_update_bits(priv->regmap, RT5120_REG_UVOVPROT, + RT5120_UVHICCUP_MASK | RT5120_OVHICCUP_MASK, + prot_enable_val); +} + +static int rt5120_regulator_probe(struct platform_device *pdev) +{ + struct rt5120_priv *priv; + struct regulator_dev *rdev; + struct regulator_config config = {}; + int i, ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!priv->regmap) { + dev_err(&pdev->dev, "Failed to init regmap\n"); + return -ENODEV; + } + + ret = rt5120_device_property_init(priv); + if (ret) { + dev_err(&pdev->dev, "Failed to do property init\n"); + return ret; + } + + ret = rt5120_parse_regulator_dt_data(priv); + if (ret) { + dev_err(&pdev->dev, "Failed to parse dt data\n"); + return ret; + } + + config.dev = &pdev->dev; + config.regmap = priv->regmap; + + for (i = 0; i < RT5120_MAX_REGULATOR; i++) { + config.of_node = rt5120_regu_match[i].of_node; + config.init_data = rt5120_regu_match[i].init_data; + + rdev = devm_regulator_register(&pdev->dev, priv->rdesc + i, + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "Failed to register regulator [%d]\n", i); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct platform_device_id rt5120_regulator_dev_table[] = { + { "rt5120-regulator", 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, rt5120_regulator_dev_table); + +static struct platform_driver rt5120_regulator_driver = { + .driver = { + .name = "rt5120-regulator", + }, + .id_table = rt5120_regulator_dev_table, + .probe = rt5120_regulator_probe, +}; +module_platform_driver(rt5120_regulator_driver); + +MODULE_AUTHOR("ChiYuan Huang "); +MODULE_DESCRIPTION("Richtek RT5120 regulator driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3