From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/rt6190-regulator.c | 495 +++++++++++++++++++++++++++++++++++ 1 file changed, 495 insertions(+) create mode 100644 drivers/regulator/rt6190-regulator.c (limited to 'drivers/regulator/rt6190-regulator.c') diff --git a/drivers/regulator/rt6190-regulator.c b/drivers/regulator/rt6190-regulator.c new file mode 100644 index 000000000..995e028ab --- /dev/null +++ b/drivers/regulator/rt6190-regulator.c @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Richtek Technology Corp. + * + * Author: ChiYuan Huang + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RT6190_REG_VID 0x00 +#define RT6190_REG_OUTV 0x01 +#define RT6190_REG_OUTC 0x03 +#define RT6190_REG_SET1 0x0D +#define RT6190_REG_SET2 0x0E +#define RT6190_REG_SET4 0x10 +#define RT6190_REG_RATIO 0x11 +#define RT6190_REG_OUT_VOLT_L 0x12 +#define RT6190_REG_TEMP_H 0x1B +#define RT6190_REG_STAT1 0x1C +#define RT6190_REG_ALERT1 0x1E +#define RT6190_REG_ALERT2 0x1F +#define RT6190_REG_MASK2 0x21 +#define RT6190_REG_OCPEN 0x28 +#define RT6190_REG_SET5 0x29 +#define RT6190_REG_VBUSC_ADC 0x32 +#define RT6190_REG_BUSC_VOLT_L 0x33 +#define RT6190_REG_BUSC_VOLT_H 0x34 +#define RT6190_REG_STAT3 0x37 +#define RT6190_REG_ALERT3 0x38 +#define RT6190_REG_MASK3 0x39 + +#define RT6190_ENPWM_MASK BIT(7) +#define RT6190_ENDCHG_MASK BIT(4) +#define RT6190_ALERT_OTPEVT BIT(6) +#define RT6190_ALERT_UVPEVT BIT(5) +#define RT6190_ALERT_OVPEVT BIT(4) +#define RT6190_ENGCP_MASK BIT(1) +#define RT6190_FCCM_MASK BIT(7) + +#define RICHTEK_VID 0x82 +#define RT6190_OUT_MIN_UV 3000000 +#define RT6190_OUT_MAX_UV 32000000 +#define RT6190_OUT_STEP_UV 20000 +#define RT6190_OUT_N_VOLT (RT6190_OUT_MAX_UV / RT6190_OUT_STEP_UV + 1) +#define RT6190_OUTV_MINSEL 150 +#define RT6190_OUT_MIN_UA 306000 +#define RT6190_OUT_MAX_UA 12114000 +#define RT6190_OUT_STEP_UA 24000 +#define RT6190_OUTC_MINSEL 19 +#define RT6190_EN_TIME_US 500 + +#define RT6190_PSM_MODE 0 +#define RT6190_FCCM_MODE 1 + +struct rt6190_data { + struct device *dev; + struct regmap *regmap; + struct gpio_desc *enable_gpio; + unsigned int cached_alert_evt; +}; + +static int rt6190_out_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + __le16 le_sel = cpu_to_le16(selector); + + return regmap_raw_write(regmap, RT6190_REG_OUTV, &le_sel, + sizeof(le_sel)); +} + +static int rt6190_out_get_voltage_sel(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + __le16 le_sel; + int ret; + + ret = regmap_raw_read(regmap, RT6190_REG_OUTV, &le_sel, sizeof(le_sel)); + + return ret ?: le16_to_cpu(le_sel); +} + +static int rt6190_out_enable(struct regulator_dev *rdev) +{ + struct rt6190_data *data = rdev_get_drvdata(rdev); + struct regmap *regmap = rdev_get_regmap(rdev); + u8 out_cfg[4]; + int ret; + + pm_runtime_get_sync(data->dev); + + /* + * From off to on, vout config will restore to IC default. + * Read vout configs before enable, and restore them after enable + */ + ret = regmap_raw_read(regmap, RT6190_REG_OUTV, out_cfg, + sizeof(out_cfg)); + if (ret) + return ret; + + ret = regulator_enable_regmap(rdev); + if (ret) + return ret; + + ret = regmap_raw_write(regmap, RT6190_REG_OUTV, out_cfg, + sizeof(out_cfg)); + if (ret) + return ret; + + return regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK, + RT6190_ENGCP_MASK); +} + +static int rt6190_out_disable(struct regulator_dev *rdev) +{ + struct rt6190_data *data = rdev_get_drvdata(rdev); + struct regmap *regmap = rdev_get_regmap(rdev); + int ret; + + ret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK, 0); + if (ret) + return ret; + + ret = regulator_disable_regmap(rdev); + if (ret) + return ret; + + /* cleared cached alert event */ + data->cached_alert_evt = 0; + + pm_runtime_put(data->dev); + + return 0; +} + +static int rt6190_out_set_current_limit(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int csel, clim; + __le16 le_csel; + + if (min_uA < RT6190_OUT_MIN_UA || max_uA > RT6190_OUT_MAX_UA) + return -EINVAL; + + csel = DIV_ROUND_UP(min_uA - RT6190_OUT_MIN_UA, RT6190_OUT_STEP_UA); + + clim = RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel; + if (clim > max_uA) + return -EINVAL; + + csel += RT6190_OUTC_MINSEL; + le_csel = cpu_to_le16(csel); + + return regmap_raw_write(regmap, RT6190_REG_OUTC, &le_csel, + sizeof(le_csel)); +} + +static int rt6190_out_get_current_limit(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + __le16 le_csel; + int csel, ret; + + ret = regmap_raw_read(regmap, RT6190_REG_OUTC, &le_csel, + sizeof(le_csel)); + if (ret) + return ret; + + csel = le16_to_cpu(le_csel); + csel -= RT6190_OUTC_MINSEL; + + return RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel; +} + +static int rt6190_out_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + unsigned int val; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = RT6190_FCCM_MASK; + break; + case REGULATOR_MODE_NORMAL: + val = 0; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(regmap, RT6190_REG_SET1, RT6190_FCCM_MASK, + val); +} + +static unsigned int rt6190_out_get_mode(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + unsigned int config; + int ret; + + ret = regmap_read(regmap, RT6190_REG_SET1, &config); + if (ret) + return REGULATOR_MODE_INVALID; + + if (config & RT6190_FCCM_MASK) + return REGULATOR_MODE_FAST; + + return REGULATOR_MODE_NORMAL; +} + +static int rt6190_out_get_error_flags(struct regulator_dev *rdev, + unsigned int *flags) +{ + struct rt6190_data *data = rdev_get_drvdata(rdev); + unsigned int state, rpt_flags = 0; + int ret; + + ret = regmap_read(data->regmap, RT6190_REG_STAT1, &state); + if (ret) + return ret; + + state |= data->cached_alert_evt; + + if (state & RT6190_ALERT_OTPEVT) + rpt_flags |= REGULATOR_ERROR_OVER_TEMP; + + if (state & RT6190_ALERT_UVPEVT) + rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE; + + if (state & RT6190_ALERT_OVPEVT) + rpt_flags |= REGULATOR_ERROR_REGULATION_OUT; + + *flags = rpt_flags; + + return 0; +} + +static unsigned int rt6190_out_of_map_mode(unsigned int mode) +{ + switch (mode) { + case RT6190_PSM_MODE: + return REGULATOR_MODE_NORMAL; + case RT6190_FCCM_MODE: + return REGULATOR_MODE_FAST; + default: + return REGULATOR_MODE_INVALID; + } +} + +static const struct regulator_ops rt6190_regulator_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = rt6190_out_set_voltage_sel, + .get_voltage_sel = rt6190_out_get_voltage_sel, + .enable = rt6190_out_enable, + .disable = rt6190_out_disable, + .is_enabled = regulator_is_enabled_regmap, + .set_current_limit = rt6190_out_set_current_limit, + .get_current_limit = rt6190_out_get_current_limit, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_mode = rt6190_out_set_mode, + .get_mode = rt6190_out_get_mode, + .get_error_flags = rt6190_out_get_error_flags, +}; + +static const struct regulator_desc rt6190_regulator_desc = { + .name = "rt6190-regulator", + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .ops = &rt6190_regulator_ops, + .min_uV = RT6190_OUT_MIN_UV, + .uV_step = RT6190_OUT_STEP_UV, + .n_voltages = RT6190_OUT_N_VOLT, + .linear_min_sel = RT6190_OUTV_MINSEL, + .enable_reg = RT6190_REG_SET2, + .enable_mask = RT6190_ENPWM_MASK, + .active_discharge_reg = RT6190_REG_SET2, + .active_discharge_mask = RT6190_ENDCHG_MASK, + .active_discharge_on = RT6190_ENDCHG_MASK, + .of_map_mode = rt6190_out_of_map_mode, +}; + +static bool rt6190_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RT6190_REG_OUT_VOLT_L ... RT6190_REG_ALERT2: + case RT6190_REG_BUSC_VOLT_L ... RT6190_REG_BUSC_VOLT_H: + case RT6190_REG_STAT3 ... RT6190_REG_ALERT3: + return true; + default: + return false; + } +} + +static const struct regmap_config rt6190_regmap_config = { + .name = "rt6190", + .cache_type = REGCACHE_FLAT, + .reg_bits = 8, + .val_bits = 8, + .max_register = RT6190_REG_MASK3, + .num_reg_defaults_raw = RT6190_REG_MASK3 + 1, + .volatile_reg = rt6190_is_volatile_reg, +}; + +static irqreturn_t rt6190_irq_handler(int irq, void *devid) +{ + struct regulator_dev *rdev = devid; + struct rt6190_data *data = rdev_get_drvdata(rdev); + unsigned int alert; + int ret; + + ret = regmap_read(data->regmap, RT6190_REG_ALERT1, &alert); + if (ret) + return IRQ_NONE; + + /* Write clear alert events */ + ret = regmap_write(data->regmap, RT6190_REG_ALERT1, alert); + if (ret) + return IRQ_NONE; + + data->cached_alert_evt |= alert; + + if (alert & RT6190_ALERT_OTPEVT) + regulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_TEMP, NULL); + + if (alert & RT6190_ALERT_UVPEVT) + regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE, NULL); + + if (alert & RT6190_ALERT_OVPEVT) + regulator_notifier_call_chain(rdev, REGULATOR_EVENT_REGULATION_OUT, NULL); + + return IRQ_HANDLED; +} + +static int rt6190_init_registers(struct regmap *regmap) +{ + int ret; + + /* Enable_ADC = 1 */ + ret = regmap_write(regmap, RT6190_REG_SET4, 0x82); + if (ret) + return ret; + + /* Config default VOUT ratio to be higher */ + ret = regmap_write(regmap, RT6190_REG_RATIO, 0x20); + + /* Mask unused alert */ + ret = regmap_write(regmap, RT6190_REG_MASK2, 0); + if (ret) + return ret; + + /* OCP config */ + ret = regmap_write(regmap, RT6190_REG_OCPEN, 0); + if (ret) + return ret; + + /* Enable VBUSC ADC */ + return regmap_write(regmap, RT6190_REG_VBUSC_ADC, 0x02); +} + +static int rt6190_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct rt6190_data *data; + struct gpio_desc *enable_gpio; + struct regmap *regmap; + struct regulator_dev *rdev; + struct regulator_config cfg = {}; + unsigned int vid; + int ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(enable_gpio)) + return dev_err_probe(dev, PTR_ERR(enable_gpio), "Failed to get 'enable' gpio\n"); + else if (enable_gpio) + usleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2); + + regmap = devm_regmap_init_i2c(i2c, &rt6190_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), "Failed to init regmap\n"); + + data->dev = dev; + data->enable_gpio = enable_gpio; + data->regmap = regmap; + i2c_set_clientdata(i2c, data); + + ret = regmap_read(regmap, RT6190_REG_VID, &vid); + if (ret) + return dev_err_probe(dev, ret, "Failed to read VID\n"); + + if (vid != RICHTEK_VID) + return dev_err_probe(dev, -ENODEV, "Incorrect VID 0x%02x\n", vid); + + ret = rt6190_init_registers(regmap); + if (ret) + return dev_err_probe(dev, ret, "Failed to init registers\n"); + + pm_runtime_set_active(dev); + ret = devm_pm_runtime_enable(dev); + if (ret) + return dev_err_probe(dev, ret, "Failed to set pm_runtime enable\n"); + + cfg.dev = dev; + cfg.of_node = dev->of_node; + cfg.driver_data = data; + cfg.init_data = of_get_regulator_init_data(dev, dev->of_node, + &rt6190_regulator_desc); + + rdev = devm_regulator_register(dev, &rt6190_regulator_desc, &cfg); + if (IS_ERR(rdev)) + return dev_err_probe(dev, PTR_ERR(rdev), "Failed to register regulator\n"); + + if (i2c->irq) { + ret = devm_request_threaded_irq(dev, i2c->irq, NULL, + rt6190_irq_handler, + IRQF_ONESHOT, dev_name(dev), + rdev); + if (ret) + return dev_err_probe(dev, ret, "Failed to register interrupt\n"); + } + + return 0; +} + +static int rt6190_runtime_suspend(struct device *dev) +{ + struct rt6190_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; + + if (!data->enable_gpio) + return 0; + + regcache_cache_only(regmap, true); + regcache_mark_dirty(regmap); + + gpiod_set_value(data->enable_gpio, 0); + + return 0; +} + +static int rt6190_runtime_resume(struct device *dev) +{ + struct rt6190_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; + + if (!data->enable_gpio) + return 0; + + gpiod_set_value(data->enable_gpio, 1); + usleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2); + + regcache_cache_only(regmap, false); + return regcache_sync(regmap); +} + +static const struct dev_pm_ops __maybe_unused rt6190_dev_pm = { + RUNTIME_PM_OPS(rt6190_runtime_suspend, rt6190_runtime_resume, NULL) +}; + +static const struct of_device_id rt6190_of_dev_table[] = { + { .compatible = "richtek,rt6190" }, + {} +}; +MODULE_DEVICE_TABLE(of, rt6190_of_dev_table); + +static struct i2c_driver rt6190_driver = { + .driver = { + .name = "rt6190", + .of_match_table = rt6190_of_dev_table, + .pm = pm_ptr(&rt6190_dev_pm), + }, + .probe_new = rt6190_probe, +}; +module_i2c_driver(rt6190_driver); + +MODULE_DESCRIPTION("Richtek RT6190 regulator driver"); +MODULE_AUTHOR("ChiYuan Huang "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3