From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/scmi-regulator.c | 424 +++++++++++++++++++++++++++++++++++++ 1 file changed, 424 insertions(+) create mode 100644 drivers/regulator/scmi-regulator.c (limited to 'drivers/regulator/scmi-regulator.c') diff --git a/drivers/regulator/scmi-regulator.c b/drivers/regulator/scmi-regulator.c new file mode 100644 index 000000000..b9918f4fd --- /dev/null +++ b/drivers/regulator/scmi-regulator.c @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// System Control and Management Interface (SCMI) based regulator driver +// +// Copyright (C) 2020-2021 ARM Ltd. +// +// Implements a regulator driver on top of the SCMI Voltage Protocol. +// +// The ARM SCMI Protocol aims in general to hide as much as possible all the +// underlying operational details while providing an abstracted interface for +// its users to operate upon: as a consequence the resulting operational +// capabilities and configurability of this regulator device are much more +// limited than the ones usually available on a standard physical regulator. +// +// The supported SCMI regulator ops are restricted to the bare minimum: +// +// - 'status_ops': enable/disable/is_enabled +// - 'voltage_ops': get_voltage_sel/set_voltage_sel +// list_voltage/map_voltage +// +// Each SCMI regulator instance is associated, through the means of a proper DT +// entry description, to a specific SCMI Voltage Domain. + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct scmi_voltage_proto_ops *voltage_ops; + +struct scmi_regulator { + u32 id; + struct scmi_device *sdev; + struct scmi_protocol_handle *ph; + struct regulator_dev *rdev; + struct device_node *of_node; + struct regulator_desc desc; + struct regulator_config conf; +}; + +struct scmi_regulator_info { + int num_doms; + struct scmi_regulator **sregv; +}; + +static int scmi_reg_enable(struct regulator_dev *rdev) +{ + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + + return voltage_ops->config_set(sreg->ph, sreg->id, + SCMI_VOLTAGE_ARCH_STATE_ON); +} + +static int scmi_reg_disable(struct regulator_dev *rdev) +{ + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + + return voltage_ops->config_set(sreg->ph, sreg->id, + SCMI_VOLTAGE_ARCH_STATE_OFF); +} + +static int scmi_reg_is_enabled(struct regulator_dev *rdev) +{ + int ret; + u32 config; + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + + ret = voltage_ops->config_get(sreg->ph, sreg->id, &config); + if (ret) { + dev_err(&sreg->sdev->dev, + "Error %d reading regulator %s status.\n", + ret, sreg->desc.name); + return ret; + } + + return config & SCMI_VOLTAGE_ARCH_STATE_ON; +} + +static int scmi_reg_get_voltage_sel(struct regulator_dev *rdev) +{ + int ret; + s32 volt_uV; + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + + ret = voltage_ops->level_get(sreg->ph, sreg->id, &volt_uV); + if (ret) + return ret; + + return sreg->desc.ops->map_voltage(rdev, volt_uV, volt_uV); +} + +static int scmi_reg_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + s32 volt_uV; + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + + volt_uV = sreg->desc.ops->list_voltage(rdev, selector); + if (volt_uV <= 0) + return -EINVAL; + + return voltage_ops->level_set(sreg->ph, sreg->id, 0x0, volt_uV); +} + +static const struct regulator_ops scmi_reg_fixed_ops = { + .enable = scmi_reg_enable, + .disable = scmi_reg_disable, + .is_enabled = scmi_reg_is_enabled, +}; + +static const struct regulator_ops scmi_reg_linear_ops = { + .enable = scmi_reg_enable, + .disable = scmi_reg_disable, + .is_enabled = scmi_reg_is_enabled, + .get_voltage_sel = scmi_reg_get_voltage_sel, + .set_voltage_sel = scmi_reg_set_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, +}; + +static const struct regulator_ops scmi_reg_discrete_ops = { + .enable = scmi_reg_enable, + .disable = scmi_reg_disable, + .is_enabled = scmi_reg_is_enabled, + .get_voltage_sel = scmi_reg_get_voltage_sel, + .set_voltage_sel = scmi_reg_set_voltage_sel, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, +}; + +static int +scmi_config_linear_regulator_mappings(struct scmi_regulator *sreg, + const struct scmi_voltage_info *vinfo) +{ + s32 delta_uV; + + /* + * Note that SCMI voltage domains describable by linear ranges + * (segments) {low, high, step} are guaranteed to come in one single + * triplet by the SCMI Voltage Domain protocol support itself. + */ + + delta_uV = (vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_HIGH] - + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW]); + + /* Rule out buggy negative-intervals answers from fw */ + if (delta_uV < 0) { + dev_err(&sreg->sdev->dev, + "Invalid volt-range %d-%duV for domain %d\n", + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW], + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_HIGH], + sreg->id); + return -EINVAL; + } + + if (!delta_uV) { + /* Just one fixed voltage exposed by SCMI */ + sreg->desc.fixed_uV = + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW]; + sreg->desc.n_voltages = 1; + sreg->desc.ops = &scmi_reg_fixed_ops; + } else { + /* One simple linear mapping. */ + sreg->desc.min_uV = + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW]; + sreg->desc.uV_step = + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_STEP]; + sreg->desc.linear_min_sel = 0; + sreg->desc.n_voltages = (delta_uV / sreg->desc.uV_step) + 1; + sreg->desc.ops = &scmi_reg_linear_ops; + } + + return 0; +} + +static int +scmi_config_discrete_regulator_mappings(struct scmi_regulator *sreg, + const struct scmi_voltage_info *vinfo) +{ + /* Discrete non linear levels are mapped to volt_table */ + sreg->desc.n_voltages = vinfo->num_levels; + + if (sreg->desc.n_voltages > 1) { + sreg->desc.volt_table = (const unsigned int *)vinfo->levels_uv; + sreg->desc.ops = &scmi_reg_discrete_ops; + } else { + sreg->desc.fixed_uV = vinfo->levels_uv[0]; + sreg->desc.ops = &scmi_reg_fixed_ops; + } + + return 0; +} + +static int scmi_regulator_common_init(struct scmi_regulator *sreg) +{ + int ret; + struct device *dev = &sreg->sdev->dev; + const struct scmi_voltage_info *vinfo; + + vinfo = voltage_ops->info_get(sreg->ph, sreg->id); + if (!vinfo) { + dev_warn(dev, "Failure to get voltage domain %d\n", + sreg->id); + return -ENODEV; + } + + /* + * Regulator framework does not fully support negative voltages + * so we discard any voltage domain reported as supporting negative + * voltages: as a consequence each levels_uv entry is guaranteed to + * be non-negative from here on. + */ + if (vinfo->negative_volts_allowed) { + dev_warn(dev, "Negative voltages NOT supported...skip %s\n", + sreg->of_node->full_name); + return -EOPNOTSUPP; + } + + sreg->desc.name = devm_kasprintf(dev, GFP_KERNEL, "%s", vinfo->name); + if (!sreg->desc.name) + return -ENOMEM; + + sreg->desc.id = sreg->id; + sreg->desc.type = REGULATOR_VOLTAGE; + sreg->desc.owner = THIS_MODULE; + sreg->desc.of_match_full_name = true; + sreg->desc.of_match = sreg->of_node->full_name; + sreg->desc.regulators_node = "regulators"; + if (vinfo->segmented) + ret = scmi_config_linear_regulator_mappings(sreg, vinfo); + else + ret = scmi_config_discrete_regulator_mappings(sreg, vinfo); + if (ret) + return ret; + + /* + * Using the scmi device here to have DT searched from Voltage + * protocol node down. + */ + sreg->conf.dev = dev; + + /* Store for later retrieval via rdev_get_drvdata() */ + sreg->conf.driver_data = sreg; + + return 0; +} + +static int process_scmi_regulator_of_node(struct scmi_device *sdev, + struct scmi_protocol_handle *ph, + struct device_node *np, + struct scmi_regulator_info *rinfo) +{ + u32 dom, ret; + + ret = of_property_read_u32(np, "reg", &dom); + if (ret) + return ret; + + if (dom >= rinfo->num_doms) + return -ENODEV; + + if (rinfo->sregv[dom]) { + dev_err(&sdev->dev, + "SCMI Voltage Domain %d already in use. Skipping: %s\n", + dom, np->full_name); + return -EINVAL; + } + + rinfo->sregv[dom] = devm_kzalloc(&sdev->dev, + sizeof(struct scmi_regulator), + GFP_KERNEL); + if (!rinfo->sregv[dom]) + return -ENOMEM; + + rinfo->sregv[dom]->id = dom; + rinfo->sregv[dom]->sdev = sdev; + rinfo->sregv[dom]->ph = ph; + + /* get hold of good nodes */ + of_node_get(np); + rinfo->sregv[dom]->of_node = np; + + dev_dbg(&sdev->dev, + "Found SCMI Regulator entry -- OF node [%d] -> %s\n", + dom, np->full_name); + + return 0; +} + +static int scmi_regulator_probe(struct scmi_device *sdev) +{ + int d, ret, num_doms; + struct device_node *np, *child; + const struct scmi_handle *handle = sdev->handle; + struct scmi_regulator_info *rinfo; + struct scmi_protocol_handle *ph; + + if (!handle) + return -ENODEV; + + voltage_ops = handle->devm_protocol_get(sdev, + SCMI_PROTOCOL_VOLTAGE, &ph); + if (IS_ERR(voltage_ops)) + return PTR_ERR(voltage_ops); + + num_doms = voltage_ops->num_domains_get(ph); + if (num_doms <= 0) { + if (!num_doms) { + dev_err(&sdev->dev, + "number of voltage domains invalid\n"); + num_doms = -EINVAL; + } else { + dev_err(&sdev->dev, + "failed to get voltage domains - err:%d\n", + num_doms); + } + + return num_doms; + } + + rinfo = devm_kzalloc(&sdev->dev, sizeof(*rinfo), GFP_KERNEL); + if (!rinfo) + return -ENOMEM; + + /* Allocate pointers array for all possible domains */ + rinfo->sregv = devm_kcalloc(&sdev->dev, num_doms, + sizeof(void *), GFP_KERNEL); + if (!rinfo->sregv) + return -ENOMEM; + + rinfo->num_doms = num_doms; + + /* + * Start collecting into rinfo->sregv possibly good SCMI Regulators as + * described by a well-formed DT entry and associated with an existing + * plausible SCMI Voltage Domain number, all belonging to this SCMI + * platform instance node (handle->dev->of_node). + */ + of_node_get(handle->dev->of_node); + np = of_find_node_by_name(handle->dev->of_node, "regulators"); + for_each_child_of_node(np, child) { + ret = process_scmi_regulator_of_node(sdev, ph, child, rinfo); + /* abort on any mem issue */ + if (ret == -ENOMEM) { + of_node_put(child); + return ret; + } + } + of_node_put(np); + /* + * Register a regulator for each valid regulator-DT-entry that we + * can successfully reach via SCMI and has a valid associated voltage + * domain. + */ + for (d = 0; d < num_doms; d++) { + struct scmi_regulator *sreg = rinfo->sregv[d]; + + /* Skip empty slots */ + if (!sreg) + continue; + + ret = scmi_regulator_common_init(sreg); + /* Skip invalid voltage domains */ + if (ret) + continue; + + sreg->rdev = devm_regulator_register(&sdev->dev, &sreg->desc, + &sreg->conf); + if (IS_ERR(sreg->rdev)) { + sreg->rdev = NULL; + continue; + } + + dev_info(&sdev->dev, + "Regulator %s registered for domain [%d]\n", + sreg->desc.name, sreg->id); + } + + dev_set_drvdata(&sdev->dev, rinfo); + + return 0; +} + +static void scmi_regulator_remove(struct scmi_device *sdev) +{ + int d; + struct scmi_regulator_info *rinfo; + + rinfo = dev_get_drvdata(&sdev->dev); + if (!rinfo) + return; + + for (d = 0; d < rinfo->num_doms; d++) { + if (!rinfo->sregv[d]) + continue; + of_node_put(rinfo->sregv[d]->of_node); + } +} + +static const struct scmi_device_id scmi_regulator_id_table[] = { + { SCMI_PROTOCOL_VOLTAGE, "regulator" }, + { }, +}; +MODULE_DEVICE_TABLE(scmi, scmi_regulator_id_table); + +static struct scmi_driver scmi_drv = { + .name = "scmi-regulator", + .probe = scmi_regulator_probe, + .remove = scmi_regulator_remove, + .id_table = scmi_regulator_id_table, +}; + +module_scmi_driver(scmi_drv); + +MODULE_AUTHOR("Cristian Marussi "); +MODULE_DESCRIPTION("ARM SCMI regulator driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3