From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/regulator/sy8824x.c | 245 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 245 insertions(+) create mode 100644 drivers/regulator/sy8824x.c (limited to 'drivers/regulator/sy8824x.c') diff --git a/drivers/regulator/sy8824x.c b/drivers/regulator/sy8824x.c new file mode 100644 index 000000000..2a81519bd --- /dev/null +++ b/drivers/regulator/sy8824x.c @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// SY8824C/SY8824E regulator driver +// +// Copyright (C) 2019 Synaptics Incorporated +// +// Author: Jisheng Zhang + +#include +#include +#include +#include +#include +#include + +#define SY8824C_BUCK_EN (1 << 7) +#define SY8824C_MODE (1 << 6) + +struct sy8824_config { + /* registers */ + unsigned int vol_reg; + unsigned int mode_reg; + unsigned int enable_reg; + /* Voltage range and step(linear) */ + unsigned int vsel_min; + unsigned int vsel_step; + unsigned int vsel_count; + const struct regmap_config *config; +}; + +struct sy8824_device_info { + struct device *dev; + struct regulator_desc desc; + struct regulator_init_data *regulator; + const struct sy8824_config *cfg; +}; + +static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct sy8824_device_info *di = rdev_get_drvdata(rdev); + const struct sy8824_config *cfg = di->cfg; + + switch (mode) { + case REGULATOR_MODE_FAST: + regmap_update_bits(rdev->regmap, cfg->mode_reg, + SY8824C_MODE, SY8824C_MODE); + break; + case REGULATOR_MODE_NORMAL: + regmap_update_bits(rdev->regmap, cfg->mode_reg, + SY8824C_MODE, 0); + break; + default: + return -EINVAL; + } + return 0; +} + +static unsigned int sy8824_get_mode(struct regulator_dev *rdev) +{ + struct sy8824_device_info *di = rdev_get_drvdata(rdev); + const struct sy8824_config *cfg = di->cfg; + u32 val; + int ret = 0; + + ret = regmap_read(rdev->regmap, cfg->mode_reg, &val); + if (ret < 0) + return ret; + if (val & SY8824C_MODE) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static const struct regulator_ops sy8824_regulator_ops = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_mode = sy8824_set_mode, + .get_mode = sy8824_get_mode, +}; + +static int sy8824_regulator_register(struct sy8824_device_info *di, + struct regulator_config *config) +{ + struct regulator_desc *rdesc = &di->desc; + const struct sy8824_config *cfg = di->cfg; + struct regulator_dev *rdev; + + rdesc->name = "sy8824-reg"; + rdesc->supply_name = "vin"; + rdesc->ops = &sy8824_regulator_ops; + rdesc->type = REGULATOR_VOLTAGE; + rdesc->n_voltages = cfg->vsel_count; + rdesc->enable_reg = cfg->enable_reg; + rdesc->enable_mask = SY8824C_BUCK_EN; + rdesc->min_uV = cfg->vsel_min; + rdesc->uV_step = cfg->vsel_step; + rdesc->vsel_reg = cfg->vol_reg; + rdesc->vsel_mask = cfg->vsel_count - 1; + rdesc->owner = THIS_MODULE; + + rdev = devm_regulator_register(di->dev, &di->desc, config); + return PTR_ERR_OR_ZERO(rdev); +} + +static const struct regmap_config sy8824_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .num_reg_defaults_raw = 1, + .cache_type = REGCACHE_FLAT, +}; + +static const struct regmap_config sy20276_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .num_reg_defaults_raw = 2, + .cache_type = REGCACHE_FLAT, +}; + +static int sy8824_i2c_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device_node *np = dev->of_node; + struct sy8824_device_info *di; + struct regulator_config config = { }; + struct regmap *regmap; + int ret; + + di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL); + if (!di) + return -ENOMEM; + + di->regulator = of_get_regulator_init_data(dev, np, &di->desc); + if (!di->regulator) { + dev_err(dev, "Platform data not found!\n"); + return -EINVAL; + } + + di->dev = dev; + di->cfg = of_device_get_match_data(dev); + + regmap = devm_regmap_init_i2c(client, di->cfg->config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to allocate regmap!\n"); + return PTR_ERR(regmap); + } + i2c_set_clientdata(client, di); + + config.dev = di->dev; + config.init_data = di->regulator; + config.regmap = regmap; + config.driver_data = di; + config.of_node = np; + + ret = sy8824_regulator_register(di, &config); + if (ret < 0) + dev_err(dev, "Failed to register regulator!\n"); + return ret; +} + +static const struct sy8824_config sy8824c_cfg = { + .vol_reg = 0x00, + .mode_reg = 0x00, + .enable_reg = 0x00, + .vsel_min = 762500, + .vsel_step = 12500, + .vsel_count = 64, + .config = &sy8824_regmap_config, +}; + +static const struct sy8824_config sy8824e_cfg = { + .vol_reg = 0x00, + .mode_reg = 0x00, + .enable_reg = 0x00, + .vsel_min = 700000, + .vsel_step = 12500, + .vsel_count = 64, + .config = &sy8824_regmap_config, +}; + +static const struct sy8824_config sy20276_cfg = { + .vol_reg = 0x00, + .mode_reg = 0x01, + .enable_reg = 0x01, + .vsel_min = 600000, + .vsel_step = 10000, + .vsel_count = 128, + .config = &sy20276_regmap_config, +}; + +static const struct sy8824_config sy20278_cfg = { + .vol_reg = 0x00, + .mode_reg = 0x01, + .enable_reg = 0x01, + .vsel_min = 762500, + .vsel_step = 12500, + .vsel_count = 64, + .config = &sy20276_regmap_config, +}; + +static const struct of_device_id sy8824_dt_ids[] = { + { + .compatible = "silergy,sy8824c", + .data = &sy8824c_cfg + }, + { + .compatible = "silergy,sy8824e", + .data = &sy8824e_cfg + }, + { + .compatible = "silergy,sy20276", + .data = &sy20276_cfg + }, + { + .compatible = "silergy,sy20278", + .data = &sy20278_cfg + }, + { } +}; +MODULE_DEVICE_TABLE(of, sy8824_dt_ids); + +static const struct i2c_device_id sy8824_id[] = { + { "sy8824", }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sy8824_id); + +static struct i2c_driver sy8824_regulator_driver = { + .driver = { + .name = "sy8824-regulator", + .of_match_table = sy8824_dt_ids, + }, + .probe_new = sy8824_i2c_probe, + .id_table = sy8824_id, +}; +module_i2c_driver(sy8824_regulator_driver); + +MODULE_AUTHOR("Jisheng Zhang "); +MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3