From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/reset/reset-ti-syscon.c | 230 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 230 insertions(+) create mode 100644 drivers/reset/reset-ti-syscon.c (limited to 'drivers/reset/reset-ti-syscon.c') diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c new file mode 100644 index 000000000..f0dd7ffc3 --- /dev/null +++ b/drivers/reset/reset-ti-syscon.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI SYSCON regmap reset driver + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ + * Andrew F. Davis + * Suman Anna + */ + +#include +#include +#include +#include +#include +#include + +#include + +/** + * struct ti_syscon_reset_control - reset control structure + * @assert_offset: reset assert control register offset from syscon base + * @assert_bit: reset assert bit in the reset assert control register + * @deassert_offset: reset deassert control register offset from syscon base + * @deassert_bit: reset deassert bit in the reset deassert control register + * @status_offset: reset status register offset from syscon base + * @status_bit: reset status bit in the reset status register + * @flags: reset flag indicating how the (de)assert and status are handled + */ +struct ti_syscon_reset_control { + unsigned int assert_offset; + unsigned int assert_bit; + unsigned int deassert_offset; + unsigned int deassert_bit; + unsigned int status_offset; + unsigned int status_bit; + u32 flags; +}; + +/** + * struct ti_syscon_reset_data - reset controller information structure + * @rcdev: reset controller entity + * @regmap: regmap handle containing the memory-mapped reset registers + * @controls: array of reset controls + * @nr_controls: number of controls in control array + */ +struct ti_syscon_reset_data { + struct reset_controller_dev rcdev; + struct regmap *regmap; + struct ti_syscon_reset_control *controls; + unsigned int nr_controls; +}; + +#define to_ti_syscon_reset_data(_rcdev) \ + container_of(_rcdev, struct ti_syscon_reset_data, rcdev) + +/** + * ti_syscon_reset_assert() - assert device reset + * @rcdev: reset controller entity + * @id: ID of the reset to be asserted + * + * This function implements the reset driver op to assert a device's reset. + * This asserts the reset in a manner prescribed by the reset flags. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_syscon_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int mask, value; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & ASSERT_NONE) + return -ENOTSUPP; /* assert not supported for this reset */ + + mask = BIT(control->assert_bit); + value = (control->flags & ASSERT_SET) ? mask : 0x0; + + return regmap_write_bits(data->regmap, control->assert_offset, mask, value); +} + +/** + * ti_syscon_reset_deassert() - deassert device reset + * @rcdev: reset controller entity + * @id: ID of reset to be deasserted + * + * This function implements the reset driver op to deassert a device's reset. + * This deasserts the reset in a manner prescribed by the reset flags. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_syscon_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int mask, value; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & DEASSERT_NONE) + return -ENOTSUPP; /* deassert not supported for this reset */ + + mask = BIT(control->deassert_bit); + value = (control->flags & DEASSERT_SET) ? mask : 0x0; + + return regmap_write_bits(data->regmap, control->deassert_offset, mask, value); +} + +/** + * ti_syscon_reset_status() - check device reset status + * @rcdev: reset controller entity + * @id: ID of the reset for which the status is being requested + * + * This function implements the reset driver op to return the status of a + * device's reset. + * + * Return: 0 if reset is deasserted, true if reset is asserted, else a + * corresponding error value + */ +static int ti_syscon_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int reset_state; + int ret; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & STATUS_NONE) + return -ENOTSUPP; /* status not supported for this reset */ + + ret = regmap_read(data->regmap, control->status_offset, &reset_state); + if (ret) + return ret; + + return !(reset_state & BIT(control->status_bit)) == + !(control->flags & STATUS_SET); +} + +static const struct reset_control_ops ti_syscon_reset_ops = { + .assert = ti_syscon_reset_assert, + .deassert = ti_syscon_reset_deassert, + .status = ti_syscon_reset_status, +}; + +static int ti_syscon_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct ti_syscon_reset_data *data; + struct regmap *regmap; + const __be32 *list; + struct ti_syscon_reset_control *controls; + int size, nr_controls, i; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + regmap = syscon_node_to_regmap(np->parent); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + list = of_get_property(np, "ti,reset-bits", &size); + if (!list || (size / sizeof(*list)) % 7 != 0) { + dev_err(dev, "invalid DT reset description\n"); + return -EINVAL; + } + + nr_controls = (size / sizeof(*list)) / 7; + controls = devm_kcalloc(dev, nr_controls, sizeof(*controls), + GFP_KERNEL); + if (!controls) + return -ENOMEM; + + for (i = 0; i < nr_controls; i++) { + controls[i].assert_offset = be32_to_cpup(list++); + controls[i].assert_bit = be32_to_cpup(list++); + controls[i].deassert_offset = be32_to_cpup(list++); + controls[i].deassert_bit = be32_to_cpup(list++); + controls[i].status_offset = be32_to_cpup(list++); + controls[i].status_bit = be32_to_cpup(list++); + controls[i].flags = be32_to_cpup(list++); + } + + data->rcdev.ops = &ti_syscon_reset_ops; + data->rcdev.owner = THIS_MODULE; + data->rcdev.of_node = np; + data->rcdev.nr_resets = nr_controls; + data->regmap = regmap; + data->controls = controls; + data->nr_controls = nr_controls; + + platform_set_drvdata(pdev, data); + + return devm_reset_controller_register(dev, &data->rcdev); +} + +static const struct of_device_id ti_syscon_reset_of_match[] = { + { .compatible = "ti,syscon-reset", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ti_syscon_reset_of_match); + +static struct platform_driver ti_syscon_reset_driver = { + .probe = ti_syscon_reset_probe, + .driver = { + .name = "ti-syscon-reset", + .of_match_table = ti_syscon_reset_of_match, + }, +}; +module_platform_driver(ti_syscon_reset_driver); + +MODULE_AUTHOR("Andrew F. Davis "); +MODULE_AUTHOR("Suman Anna "); +MODULE_DESCRIPTION("TI SYSCON Regmap Reset Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3