From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/reset/sti/Kconfig | 11 ++ drivers/reset/sti/Makefile | 4 + drivers/reset/sti/reset-stih407.c | 159 +++++++++++++++++++++++++++++ drivers/reset/sti/reset-syscfg.c | 206 ++++++++++++++++++++++++++++++++++++++ drivers/reset/sti/reset-syscfg.h | 65 ++++++++++++ 5 files changed, 445 insertions(+) create mode 100644 drivers/reset/sti/Kconfig create mode 100644 drivers/reset/sti/Makefile create mode 100644 drivers/reset/sti/reset-stih407.c create mode 100644 drivers/reset/sti/reset-syscfg.c create mode 100644 drivers/reset/sti/reset-syscfg.h (limited to 'drivers/reset/sti') diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig new file mode 100644 index 000000000..9455e1c7a --- /dev/null +++ b/drivers/reset/sti/Kconfig @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +if ARCH_STI + +config STI_RESET_SYSCFG + bool + +config STIH407_RESET + bool + select STI_RESET_SYSCFG + +endif diff --git a/drivers/reset/sti/Makefile b/drivers/reset/sti/Makefile new file mode 100644 index 000000000..3eb30f7e8 --- /dev/null +++ b/drivers/reset/sti/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o + +obj-$(CONFIG_STIH407_RESET) += reset-stih407.o diff --git a/drivers/reset/sti/reset-stih407.c b/drivers/reset/sti/reset-stih407.c new file mode 100644 index 000000000..c3bf9a918 --- /dev/null +++ b/drivers/reset/sti/reset-stih407.c @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited + * Author: Giuseppe Cavallaro + */ +#include +#include +#include +#include +#include +#include "reset-syscfg.h" + +/* STiH407 Peripheral powerdown definitions. */ +static const char stih407_core[] = "st,stih407-core-syscfg"; +static const char stih407_sbc_reg[] = "st,stih407-sbc-reg-syscfg"; +static const char stih407_lpm[] = "st,stih407-lpm-syscfg"; + +#define STIH407_PDN_0(_bit) \ + _SYSCFG_RST_CH(stih407_core, SYSCFG_5000, _bit, SYSSTAT_5500, _bit) +#define STIH407_PDN_1(_bit) \ + _SYSCFG_RST_CH(stih407_core, SYSCFG_5001, _bit, SYSSTAT_5501, _bit) +#define STIH407_PDN_ETH(_bit, _stat) \ + _SYSCFG_RST_CH(stih407_sbc_reg, SYSCFG_4032, _bit, SYSSTAT_4520, _stat) + +/* Powerdown requests control 0 */ +#define SYSCFG_5000 0x0 +#define SYSSTAT_5500 0x7d0 +/* Powerdown requests control 1 (High Speed Links) */ +#define SYSCFG_5001 0x4 +#define SYSSTAT_5501 0x7d4 + +/* Ethernet powerdown/status/reset */ +#define SYSCFG_4032 0x80 +#define SYSSTAT_4520 0x820 +#define SYSCFG_4002 0x8 + +static const struct syscfg_reset_channel_data stih407_powerdowns[] = { + [STIH407_EMISS_POWERDOWN] = STIH407_PDN_0(1), + [STIH407_NAND_POWERDOWN] = STIH407_PDN_0(0), + [STIH407_USB3_POWERDOWN] = STIH407_PDN_1(6), + [STIH407_USB2_PORT1_POWERDOWN] = STIH407_PDN_1(5), + [STIH407_USB2_PORT0_POWERDOWN] = STIH407_PDN_1(4), + [STIH407_PCIE1_POWERDOWN] = STIH407_PDN_1(3), + [STIH407_PCIE0_POWERDOWN] = STIH407_PDN_1(2), + [STIH407_SATA1_POWERDOWN] = STIH407_PDN_1(1), + [STIH407_SATA0_POWERDOWN] = STIH407_PDN_1(0), + [STIH407_ETH1_POWERDOWN] = STIH407_PDN_ETH(0, 2), +}; + +/* Reset Generator control 0/1 */ +#define SYSCFG_5128 0x200 +#define SYSCFG_5131 0x20c +#define SYSCFG_5132 0x210 + +#define LPM_SYSCFG_1 0x4 /* Softreset IRB & SBC UART */ + +#define STIH407_SRST_CORE(_reg, _bit) \ + _SYSCFG_RST_CH_NO_ACK(stih407_core, _reg, _bit) + +#define STIH407_SRST_SBC(_reg, _bit) \ + _SYSCFG_RST_CH_NO_ACK(stih407_sbc_reg, _reg, _bit) + +#define STIH407_SRST_LPM(_reg, _bit) \ + _SYSCFG_RST_CH_NO_ACK(stih407_lpm, _reg, _bit) + +static const struct syscfg_reset_channel_data stih407_softresets[] = { + [STIH407_ETH1_SOFTRESET] = STIH407_SRST_SBC(SYSCFG_4002, 4), + [STIH407_MMC1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 3), + [STIH407_USB2_PORT0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 28), + [STIH407_USB2_PORT1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 29), + [STIH407_PICOPHY_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 30), + [STIH407_IRB_SOFTRESET] = STIH407_SRST_LPM(LPM_SYSCFG_1, 6), + [STIH407_PCIE0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 6), + [STIH407_PCIE1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 15), + [STIH407_SATA0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 7), + [STIH407_SATA1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 16), + [STIH407_MIPHY0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 4), + [STIH407_MIPHY1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 13), + [STIH407_MIPHY2_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 22), + [STIH407_SATA0_PWR_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 5), + [STIH407_SATA1_PWR_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 14), + [STIH407_DELTA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 3), + [STIH407_BLITTER_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 10), + [STIH407_HDTVOUT_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 11), + [STIH407_HDQVDP_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 12), + [STIH407_VDP_AUX_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 14), + [STIH407_COMPO_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 15), + [STIH407_HDMI_TX_PHY_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 21), + [STIH407_JPEG_DEC_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 23), + [STIH407_VP8_DEC_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 24), + [STIH407_GPU_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 30), + [STIH407_HVA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 0), + [STIH407_ERAM_HVA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 1), + [STIH407_LPM_SOFTRESET] = STIH407_SRST_SBC(SYSCFG_4002, 2), + [STIH407_KEYSCAN_SOFTRESET] = STIH407_SRST_LPM(LPM_SYSCFG_1, 8), + [STIH407_ST231_AUD_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 26), + [STIH407_ST231_DMU_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 27), + [STIH407_ST231_GP0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 28), + [STIH407_ST231_GP1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5128, 2), +}; + +/* PicoPHY reset/control */ +#define SYSCFG_5061 0x0f4 + +static const struct syscfg_reset_channel_data stih407_picophyresets[] = { + [STIH407_PICOPHY0_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 5), + [STIH407_PICOPHY1_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 6), + [STIH407_PICOPHY2_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 7), +}; + +static const struct syscfg_reset_controller_data stih407_powerdown_controller = { + .wait_for_ack = true, + .nr_channels = ARRAY_SIZE(stih407_powerdowns), + .channels = stih407_powerdowns, +}; + +static const struct syscfg_reset_controller_data stih407_softreset_controller = { + .wait_for_ack = false, + .active_low = true, + .nr_channels = ARRAY_SIZE(stih407_softresets), + .channels = stih407_softresets, +}; + +static const struct syscfg_reset_controller_data stih407_picophyreset_controller = { + .wait_for_ack = false, + .nr_channels = ARRAY_SIZE(stih407_picophyresets), + .channels = stih407_picophyresets, +}; + +static const struct of_device_id stih407_reset_match[] = { + { + .compatible = "st,stih407-powerdown", + .data = &stih407_powerdown_controller, + }, + { + .compatible = "st,stih407-softreset", + .data = &stih407_softreset_controller, + }, + { + .compatible = "st,stih407-picophyreset", + .data = &stih407_picophyreset_controller, + }, + { /* sentinel */ }, +}; + +static struct platform_driver stih407_reset_driver = { + .probe = syscfg_reset_probe, + .driver = { + .name = "reset-stih407", + .of_match_table = stih407_reset_match, + }, +}; + +static int __init stih407_reset_init(void) +{ + return platform_driver_register(&stih407_reset_driver); +} + +arch_initcall(stih407_reset_init); diff --git a/drivers/reset/sti/reset-syscfg.c b/drivers/reset/sti/reset-syscfg.c new file mode 100644 index 000000000..b4b46e0f2 --- /dev/null +++ b/drivers/reset/sti/reset-syscfg.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2013 STMicroelectronics Limited + * Author: Stephen Gallimore + * + * Inspired by mach-imx/src.c + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "reset-syscfg.h" + +/** + * struct syscfg_reset_channel - Reset channel regmap configuration + * + * @reset: regmap field for the channel's reset bit. + * @ack: regmap field for the channel's ack bit (optional). + */ +struct syscfg_reset_channel { + struct regmap_field *reset; + struct regmap_field *ack; +}; + +/** + * struct syscfg_reset_controller - A reset controller which groups together + * a set of related reset bits, which may be located in different system + * configuration registers. + * + * @rst: base reset controller structure. + * @active_low: are the resets in this controller active low, i.e. clearing + * the reset bit puts the hardware into reset. + * @channels: An array of reset channels for this controller. + */ +struct syscfg_reset_controller { + struct reset_controller_dev rst; + bool active_low; + struct syscfg_reset_channel *channels; +}; + +#define to_syscfg_reset_controller(_rst) \ + container_of(_rst, struct syscfg_reset_controller, rst) + +static int syscfg_reset_program_hw(struct reset_controller_dev *rcdev, + unsigned long idx, int assert) +{ + struct syscfg_reset_controller *rst = to_syscfg_reset_controller(rcdev); + const struct syscfg_reset_channel *ch; + u32 ctrl_val = rst->active_low ? !assert : !!assert; + int err; + + if (idx >= rcdev->nr_resets) + return -EINVAL; + + ch = &rst->channels[idx]; + + err = regmap_field_write(ch->reset, ctrl_val); + if (err) + return err; + + if (ch->ack) { + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + u32 ack_val; + + while (true) { + err = regmap_field_read(ch->ack, &ack_val); + if (err) + return err; + + if (ack_val == ctrl_val) + break; + + if (time_after(jiffies, timeout)) + return -ETIME; + + cpu_relax(); + } + } + + return 0; +} + +static int syscfg_reset_assert(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + return syscfg_reset_program_hw(rcdev, idx, true); +} + +static int syscfg_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + return syscfg_reset_program_hw(rcdev, idx, false); +} + +static int syscfg_reset_dev(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + int err; + + err = syscfg_reset_assert(rcdev, idx); + if (err) + return err; + + return syscfg_reset_deassert(rcdev, idx); +} + +static int syscfg_reset_status(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + struct syscfg_reset_controller *rst = to_syscfg_reset_controller(rcdev); + const struct syscfg_reset_channel *ch; + u32 ret_val = 0; + int err; + + if (idx >= rcdev->nr_resets) + return -EINVAL; + + ch = &rst->channels[idx]; + if (ch->ack) + err = regmap_field_read(ch->ack, &ret_val); + else + err = regmap_field_read(ch->reset, &ret_val); + if (err) + return err; + + return rst->active_low ? !ret_val : !!ret_val; +} + +static const struct reset_control_ops syscfg_reset_ops = { + .reset = syscfg_reset_dev, + .assert = syscfg_reset_assert, + .deassert = syscfg_reset_deassert, + .status = syscfg_reset_status, +}; + +static int syscfg_reset_controller_register(struct device *dev, + const struct syscfg_reset_controller_data *data) +{ + struct syscfg_reset_controller *rc; + int i, err; + + rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL); + if (!rc) + return -ENOMEM; + + rc->channels = devm_kcalloc(dev, data->nr_channels, + sizeof(*rc->channels), GFP_KERNEL); + if (!rc->channels) + return -ENOMEM; + + rc->rst.ops = &syscfg_reset_ops; + rc->rst.of_node = dev->of_node; + rc->rst.nr_resets = data->nr_channels; + rc->active_low = data->active_low; + + for (i = 0; i < data->nr_channels; i++) { + struct regmap *map; + struct regmap_field *f; + const char *compatible = data->channels[i].compatible; + + map = syscon_regmap_lookup_by_compatible(compatible); + if (IS_ERR(map)) + return PTR_ERR(map); + + f = devm_regmap_field_alloc(dev, map, data->channels[i].reset); + if (IS_ERR(f)) + return PTR_ERR(f); + + rc->channels[i].reset = f; + + if (!data->wait_for_ack) + continue; + + f = devm_regmap_field_alloc(dev, map, data->channels[i].ack); + if (IS_ERR(f)) + return PTR_ERR(f); + + rc->channels[i].ack = f; + } + + err = reset_controller_register(&rc->rst); + if (!err) + dev_info(dev, "registered\n"); + + return err; +} + +int syscfg_reset_probe(struct platform_device *pdev) +{ + struct device *dev = pdev ? &pdev->dev : NULL; + const struct of_device_id *match; + + if (!dev || !dev->driver) + return -ENODEV; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) + return -EINVAL; + + return syscfg_reset_controller_register(dev, match->data); +} diff --git a/drivers/reset/sti/reset-syscfg.h b/drivers/reset/sti/reset-syscfg.h new file mode 100644 index 000000000..4e3e69de1 --- /dev/null +++ b/drivers/reset/sti/reset-syscfg.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited + * Author: Stephen Gallimore + */ +#ifndef __STI_RESET_SYSCFG_H +#define __STI_RESET_SYSCFG_H + +#include +#include +#include + +/** + * Reset channel description for a system configuration register based + * reset controller. + * + * @compatible: Compatible string of the syscon regmap containing this + * channel's control and ack (status) bits. + * @reset: Regmap field description of the channel's reset bit. + * @ack: Regmap field description of the channel's acknowledge bit. + */ +struct syscfg_reset_channel_data { + const char *compatible; + struct reg_field reset; + struct reg_field ack; +}; + +#define _SYSCFG_RST_CH(_c, _rr, _rb, _ar, _ab) \ + { .compatible = _c, \ + .reset = REG_FIELD(_rr, _rb, _rb), \ + .ack = REG_FIELD(_ar, _ab, _ab), } + +#define _SYSCFG_RST_CH_NO_ACK(_c, _rr, _rb) \ + { .compatible = _c, \ + .reset = REG_FIELD(_rr, _rb, _rb), } + +/** + * Description of a system configuration register based reset controller. + * + * @wait_for_ack: The controller will wait for reset assert and de-assert to + * be "ack'd" in a channel's ack field. + * @active_low: Are the resets in this controller active low, i.e. clearing + * the reset bit puts the hardware into reset. + * @nr_channels: The number of reset channels in this controller. + * @channels: An array of reset channel descriptions. + */ +struct syscfg_reset_controller_data { + bool wait_for_ack; + bool active_low; + int nr_channels; + const struct syscfg_reset_channel_data *channels; +}; + +/** + * syscfg_reset_probe(): platform device probe function used by syscfg + * reset controller drivers. This registers a reset + * controller configured by the OF match data for + * the compatible device which should be of type + * "struct syscfg_reset_controller_data". + * + * @pdev: platform device + */ +int syscfg_reset_probe(struct platform_device *pdev); + +#endif /* __STI_RESET_SYSCFG_H */ -- cgit v1.2.3