From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/rtc/rtc-rx4581.c | 292 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 292 insertions(+) create mode 100644 drivers/rtc/rtc-rx4581.c (limited to 'drivers/rtc/rtc-rx4581.c') diff --git a/drivers/rtc/rtc-rx4581.c b/drivers/rtc/rtc-rx4581.c new file mode 100644 index 000000000..c092e0452 --- /dev/null +++ b/drivers/rtc/rtc-rx4581.c @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* drivers/rtc/rtc-rx4581.c + * + * written by Torben Hohn + * + * Based on: + * drivers/rtc/rtc-max6902.c + * + * Copyright (C) 2006 8D Technologies inc. + * Copyright (C) 2004 Compulab Ltd. + * + * Driver for MAX6902 spi RTC + * + * and based on: + * drivers/rtc/rtc-rx8581.c + * + * An I2C driver for the Epson RX8581 RTC + * + * Author: Martyn Welch + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC) + * Copyright 2005-06 Tower Technologies + */ + +#include +#include +#include +#include +#include +#include +#include + +#define RX4581_REG_SC 0x00 /* Second in BCD */ +#define RX4581_REG_MN 0x01 /* Minute in BCD */ +#define RX4581_REG_HR 0x02 /* Hour in BCD */ +#define RX4581_REG_DW 0x03 /* Day of Week */ +#define RX4581_REG_DM 0x04 /* Day of Month in BCD */ +#define RX4581_REG_MO 0x05 /* Month in BCD */ +#define RX4581_REG_YR 0x06 /* Year in BCD */ +#define RX4581_REG_RAM 0x07 /* RAM */ +#define RX4581_REG_AMN 0x08 /* Alarm Min in BCD*/ +#define RX4581_REG_AHR 0x09 /* Alarm Hour in BCD */ +#define RX4581_REG_ADM 0x0A +#define RX4581_REG_ADW 0x0A +#define RX4581_REG_TMR0 0x0B +#define RX4581_REG_TMR1 0x0C +#define RX4581_REG_EXT 0x0D /* Extension Register */ +#define RX4581_REG_FLAG 0x0E /* Flag Register */ +#define RX4581_REG_CTRL 0x0F /* Control Register */ + + +/* Flag Register bit definitions */ +#define RX4581_FLAG_UF 0x20 /* Update */ +#define RX4581_FLAG_TF 0x10 /* Timer */ +#define RX4581_FLAG_AF 0x08 /* Alarm */ +#define RX4581_FLAG_VLF 0x02 /* Voltage Low */ + +/* Control Register bit definitions */ +#define RX4581_CTRL_UIE 0x20 /* Update Interrupt Enable */ +#define RX4581_CTRL_TIE 0x10 /* Timer Interrupt Enable */ +#define RX4581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */ +#define RX4581_CTRL_STOP 0x02 /* STOP bit */ +#define RX4581_CTRL_RESET 0x01 /* RESET bit */ + +static int rx4581_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[2]; + + /* high nibble must be '0' to write */ + buf[0] = address & 0x0f; + buf[1] = data; + + return spi_write_then_read(spi, buf, 2, NULL, 0); +} + +static int rx4581_get_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + + /* Set MSB to indicate read */ + *data = address | 0x80; + + return spi_write_then_read(spi, data, 1, data, 1); +} + +/* + * In the routines that deal directly with the rx8581 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. + */ +static int rx4581_get_datetime(struct device *dev, struct rtc_time *tm) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char date[7]; + unsigned char data; + int err; + + /* First we ensure that the "update flag" is not set, we read the + * time and date then re-read the "update flag". If the update flag + * has been set, we know that the time has changed during the read so + * we repeat the whole process again. + */ + err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data); + if (err != 0) { + dev_err(dev, "Unable to read device flags\n"); + return -EIO; + } + + do { + /* If update flag set, clear it */ + if (data & RX4581_FLAG_UF) { + err = rx4581_set_reg(dev, + RX4581_REG_FLAG, (data & ~RX4581_FLAG_UF)); + if (err != 0) { + dev_err(dev, "Unable to write device " + "flags\n"); + return -EIO; + } + } + + /* Now read time and date */ + date[0] = 0x80; + err = spi_write_then_read(spi, date, 1, date, 7); + if (err < 0) { + dev_err(dev, "Unable to read date\n"); + return -EIO; + } + + /* Check flag register */ + err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data); + if (err != 0) { + dev_err(dev, "Unable to read device flags\n"); + return -EIO; + } + } while (data & RX4581_FLAG_UF); + + if (data & RX4581_FLAG_VLF) + dev_info(dev, + "low voltage detected, date/time is not reliable.\n"); + + dev_dbg(dev, + "%s: raw data is sec=%02x, min=%02x, hr=%02x, " + "wday=%02x, mday=%02x, mon=%02x, year=%02x\n", + __func__, + date[0], date[1], date[2], date[3], date[4], date[5], date[6]); + + tm->tm_sec = bcd2bin(date[RX4581_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(date[RX4581_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(date[RX4581_REG_HR] & 0x3F); /* rtc hr 0-23 */ + tm->tm_wday = ilog2(date[RX4581_REG_DW] & 0x7F); + tm->tm_mday = bcd2bin(date[RX4581_REG_DM] & 0x3F); + tm->tm_mon = bcd2bin(date[RX4581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ + tm->tm_year = bcd2bin(date[RX4581_REG_YR]); + if (tm->tm_year < 70) + tm->tm_year += 100; /* assume we are in 1970...2069 */ + + + dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int rx4581_set_datetime(struct device *dev, struct rtc_time *tm) +{ + struct spi_device *spi = to_spi_device(dev); + int err; + unsigned char buf[8], data; + + dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + buf[0] = 0x00; + /* hours, minutes and seconds */ + buf[RX4581_REG_SC+1] = bin2bcd(tm->tm_sec); + buf[RX4581_REG_MN+1] = bin2bcd(tm->tm_min); + buf[RX4581_REG_HR+1] = bin2bcd(tm->tm_hour); + + buf[RX4581_REG_DM+1] = bin2bcd(tm->tm_mday); + + /* month, 1 - 12 */ + buf[RX4581_REG_MO+1] = bin2bcd(tm->tm_mon + 1); + + /* year and century */ + buf[RX4581_REG_YR+1] = bin2bcd(tm->tm_year % 100); + buf[RX4581_REG_DW+1] = (0x1 << tm->tm_wday); + + /* Stop the clock */ + err = rx4581_get_reg(dev, RX4581_REG_CTRL, &data); + if (err != 0) { + dev_err(dev, "Unable to read control register\n"); + return -EIO; + } + + err = rx4581_set_reg(dev, RX4581_REG_CTRL, + (data | RX4581_CTRL_STOP)); + if (err != 0) { + dev_err(dev, "Unable to write control register\n"); + return -EIO; + } + + /* write register's data */ + err = spi_write_then_read(spi, buf, 8, NULL, 0); + if (err != 0) { + dev_err(dev, "Unable to write to date registers\n"); + return -EIO; + } + + /* get VLF and clear it */ + err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data); + if (err != 0) { + dev_err(dev, "Unable to read flag register\n"); + return -EIO; + } + + err = rx4581_set_reg(dev, RX4581_REG_FLAG, + (data & ~(RX4581_FLAG_VLF))); + if (err != 0) { + dev_err(dev, "Unable to write flag register\n"); + return -EIO; + } + + /* Restart the clock */ + err = rx4581_get_reg(dev, RX4581_REG_CTRL, &data); + if (err != 0) { + dev_err(dev, "Unable to read control register\n"); + return -EIO; + } + + err = rx4581_set_reg(dev, RX4581_REG_CTRL, + (data & ~(RX4581_CTRL_STOP))); + if (err != 0) { + dev_err(dev, "Unable to write control register\n"); + return -EIO; + } + + return 0; +} + +static const struct rtc_class_ops rx4581_rtc_ops = { + .read_time = rx4581_get_datetime, + .set_time = rx4581_set_datetime, +}; + +static int rx4581_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + int res; + + res = rx4581_get_reg(&spi->dev, RX4581_REG_SC, &tmp); + if (res != 0) + return res; + + rtc = devm_rtc_device_register(&spi->dev, "rx4581", + &rx4581_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + spi_set_drvdata(spi, rtc); + return 0; +} + +static const struct spi_device_id rx4581_id[] = { + { "rx4581", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, rx4581_id); + +static struct spi_driver rx4581_driver = { + .driver = { + .name = "rtc-rx4581", + }, + .probe = rx4581_probe, + .id_table = rx4581_id, +}; + +module_spi_driver(rx4581_driver); + +MODULE_DESCRIPTION("rx4581 spi RTC driver"); +MODULE_AUTHOR("Torben Hohn"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:rtc-rx4581"); -- cgit v1.2.3