From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/aic94xx/aic94xx_reg.c | 313 +++++++++++++++++++++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 drivers/scsi/aic94xx/aic94xx_reg.c (limited to 'drivers/scsi/aic94xx/aic94xx_reg.c') diff --git a/drivers/scsi/aic94xx/aic94xx_reg.c b/drivers/scsi/aic94xx/aic94xx_reg.c new file mode 100644 index 000000000..392499e80 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_reg.c @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Aic94xx SAS/SATA driver register access. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov + */ + +#include +#include "aic94xx_reg.h" +#include "aic94xx.h" + +/* Writing to device address space. + * Offset comes before value to remind that the operation of + * this function is *offs = val. + */ +static void asd_write_byte(struct asd_ha_struct *asd_ha, + unsigned long offs, u8 val) +{ + if (unlikely(asd_ha->iospace)) + outb(val, + (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF)); + else + writeb(val, asd_ha->io_handle[0].addr + offs); + wmb(); +} + +static void asd_write_word(struct asd_ha_struct *asd_ha, + unsigned long offs, u16 val) +{ + if (unlikely(asd_ha->iospace)) + outw(val, + (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF)); + else + writew(val, asd_ha->io_handle[0].addr + offs); + wmb(); +} + +static void asd_write_dword(struct asd_ha_struct *asd_ha, + unsigned long offs, u32 val) +{ + if (unlikely(asd_ha->iospace)) + outl(val, + (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF)); + else + writel(val, asd_ha->io_handle[0].addr + offs); + wmb(); +} + +/* Reading from device address space. + */ +static u8 asd_read_byte(struct asd_ha_struct *asd_ha, unsigned long offs) +{ + u8 val; + if (unlikely(asd_ha->iospace)) + val = inb((unsigned long) asd_ha->io_handle[0].addr + + (offs & 0xFF)); + else + val = readb(asd_ha->io_handle[0].addr + offs); + rmb(); + return val; +} + +static u16 asd_read_word(struct asd_ha_struct *asd_ha, + unsigned long offs) +{ + u16 val; + if (unlikely(asd_ha->iospace)) + val = inw((unsigned long)asd_ha->io_handle[0].addr + + (offs & 0xFF)); + else + val = readw(asd_ha->io_handle[0].addr + offs); + rmb(); + return val; +} + +static u32 asd_read_dword(struct asd_ha_struct *asd_ha, + unsigned long offs) +{ + u32 val; + if (unlikely(asd_ha->iospace)) + val = inl((unsigned long) asd_ha->io_handle[0].addr + + (offs & 0xFF)); + else + val = readl(asd_ha->io_handle[0].addr + offs); + rmb(); + return val; +} + +static inline u32 asd_mem_offs_swa(void) +{ + return 0; +} + +static inline u32 asd_mem_offs_swc(void) +{ + return asd_mem_offs_swa() + MBAR0_SWA_SIZE; +} + +static inline u32 asd_mem_offs_swb(void) +{ + return asd_mem_offs_swc() + MBAR0_SWC_SIZE + 0x20; +} + +/* We know that the register wanted is in the range + * of the sliding window. + */ +#define ASD_READ_SW(ww, type, ord) \ +static type asd_read_##ww##_##ord(struct asd_ha_struct *asd_ha, \ + u32 reg) \ +{ \ + struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \ + u32 map_offs = (reg - io_handle->ww##_base) + asd_mem_offs_##ww();\ + return asd_read_##ord(asd_ha, (unsigned long)map_offs); \ +} + +#define ASD_WRITE_SW(ww, type, ord) \ +static void asd_write_##ww##_##ord(struct asd_ha_struct *asd_ha, \ + u32 reg, type val) \ +{ \ + struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \ + u32 map_offs = (reg - io_handle->ww##_base) + asd_mem_offs_##ww();\ + asd_write_##ord(asd_ha, (unsigned long)map_offs, val); \ +} + +ASD_READ_SW(swa, u8, byte); +ASD_READ_SW(swa, u16, word); +ASD_READ_SW(swa, u32, dword); + +ASD_READ_SW(swb, u8, byte); +ASD_READ_SW(swb, u16, word); +ASD_READ_SW(swb, u32, dword); + +ASD_READ_SW(swc, u8, byte); +ASD_READ_SW(swc, u16, word); +ASD_READ_SW(swc, u32, dword); + +ASD_WRITE_SW(swa, u8, byte); +ASD_WRITE_SW(swa, u16, word); +ASD_WRITE_SW(swa, u32, dword); + +ASD_WRITE_SW(swb, u8, byte); +ASD_WRITE_SW(swb, u16, word); +ASD_WRITE_SW(swb, u32, dword); + +ASD_WRITE_SW(swc, u8, byte); +ASD_WRITE_SW(swc, u16, word); +ASD_WRITE_SW(swc, u32, dword); + +/* + * A word about sliding windows: + * MBAR0 is divided into sliding windows A, C and B, in that order. + * SWA starts at offset 0 of MBAR0, up to 0x57, with size 0x58 bytes. + * SWC starts at offset 0x58 of MBAR0, up to 0x60, with size 0x8 bytes. + * From 0x60 to 0x7F, we have a copy of PCI config space 0x60-0x7F. + * SWB starts at offset 0x80 of MBAR0 and extends to the end of MBAR0. + * See asd_init_sw() in aic94xx_hwi.c + * + * We map the most common registers we'd access of the internal 4GB + * host adapter memory space. If a register/internal memory location + * is wanted which is not mapped, we slide SWB, by paging it, + * see asd_move_swb() in aic94xx_reg.c. + */ + +/** + * asd_move_swb -- move sliding window B + * @asd_ha: pointer to host adapter structure + * @reg: register desired to be within range of the new window + */ +static void asd_move_swb(struct asd_ha_struct *asd_ha, u32 reg) +{ + u32 base = reg & ~(MBAR0_SWB_SIZE-1); + pci_write_config_dword(asd_ha->pcidev, PCI_CONF_MBAR0_SWB, base); + asd_ha->io_handle[0].swb_base = base; +} + +static void __asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val) +{ + struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; + BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); + if (io_handle->swa_base <= reg + && reg < io_handle->swa_base + MBAR0_SWA_SIZE) + asd_write_swa_byte (asd_ha, reg,val); + else if (io_handle->swb_base <= reg + && reg < io_handle->swb_base + MBAR0_SWB_SIZE) + asd_write_swb_byte (asd_ha, reg, val); + else if (io_handle->swc_base <= reg + && reg < io_handle->swc_base + MBAR0_SWC_SIZE) + asd_write_swc_byte (asd_ha, reg, val); + else { + /* Ok, we have to move SWB */ + asd_move_swb(asd_ha, reg); + asd_write_swb_byte (asd_ha, reg, val); + } +} + +#define ASD_WRITE_REG(type, ord) \ +void asd_write_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg, type val)\ +{ \ + struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \ + unsigned long flags; \ + BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \ + spin_lock_irqsave(&asd_ha->iolock, flags); \ + if (io_handle->swa_base <= reg \ + && reg < io_handle->swa_base + MBAR0_SWA_SIZE) \ + asd_write_swa_##ord (asd_ha, reg,val); \ + else if (io_handle->swb_base <= reg \ + && reg < io_handle->swb_base + MBAR0_SWB_SIZE) \ + asd_write_swb_##ord (asd_ha, reg, val); \ + else if (io_handle->swc_base <= reg \ + && reg < io_handle->swc_base + MBAR0_SWC_SIZE) \ + asd_write_swc_##ord (asd_ha, reg, val); \ + else { \ + /* Ok, we have to move SWB */ \ + asd_move_swb(asd_ha, reg); \ + asd_write_swb_##ord (asd_ha, reg, val); \ + } \ + spin_unlock_irqrestore(&asd_ha->iolock, flags); \ +} + +ASD_WRITE_REG(u8, byte); +ASD_WRITE_REG(u16,word); +ASD_WRITE_REG(u32,dword); + +static u8 __asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg) +{ + struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; + u8 val; + BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); + if (io_handle->swa_base <= reg + && reg < io_handle->swa_base + MBAR0_SWA_SIZE) + val = asd_read_swa_byte (asd_ha, reg); + else if (io_handle->swb_base <= reg + && reg < io_handle->swb_base + MBAR0_SWB_SIZE) + val = asd_read_swb_byte (asd_ha, reg); + else if (io_handle->swc_base <= reg + && reg < io_handle->swc_base + MBAR0_SWC_SIZE) + val = asd_read_swc_byte (asd_ha, reg); + else { + /* Ok, we have to move SWB */ + asd_move_swb(asd_ha, reg); + val = asd_read_swb_byte (asd_ha, reg); + } + return val; +} + +#define ASD_READ_REG(type, ord) \ +type asd_read_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg) \ +{ \ + struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \ + type val; \ + unsigned long flags; \ + BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \ + spin_lock_irqsave(&asd_ha->iolock, flags); \ + if (io_handle->swa_base <= reg \ + && reg < io_handle->swa_base + MBAR0_SWA_SIZE) \ + val = asd_read_swa_##ord (asd_ha, reg); \ + else if (io_handle->swb_base <= reg \ + && reg < io_handle->swb_base + MBAR0_SWB_SIZE) \ + val = asd_read_swb_##ord (asd_ha, reg); \ + else if (io_handle->swc_base <= reg \ + && reg < io_handle->swc_base + MBAR0_SWC_SIZE) \ + val = asd_read_swc_##ord (asd_ha, reg); \ + else { \ + /* Ok, we have to move SWB */ \ + asd_move_swb(asd_ha, reg); \ + val = asd_read_swb_##ord (asd_ha, reg); \ + } \ + spin_unlock_irqrestore(&asd_ha->iolock, flags); \ + return val; \ +} + +ASD_READ_REG(u8, byte); +ASD_READ_REG(u16,word); +ASD_READ_REG(u32,dword); + +/** + * asd_read_reg_string -- read a string of bytes from io space memory + * @asd_ha: pointer to host adapter structure + * @dst: pointer to a destination buffer where data will be written to + * @offs: start offset (register) to read from + * @count: number of bytes to read + */ +void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst, + u32 offs, int count) +{ + u8 *p = dst; + unsigned long flags; + + spin_lock_irqsave(&asd_ha->iolock, flags); + for ( ; count > 0; count--, offs++, p++) + *p = __asd_read_reg_byte(asd_ha, offs); + spin_unlock_irqrestore(&asd_ha->iolock, flags); +} + +/** + * asd_write_reg_string -- write a string of bytes to io space memory + * @asd_ha: pointer to host adapter structure + * @src: pointer to source buffer where data will be read from + * @offs: start offset (register) to write to + * @count: number of bytes to write + */ +void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src, + u32 offs, int count) +{ + u8 *p = src; + unsigned long flags; + + spin_lock_irqsave(&asd_ha->iolock, flags); + for ( ; count > 0; count--, offs++, p++) + __asd_write_reg_byte(asd_ha, offs, *p); + spin_unlock_irqrestore(&asd_ha->iolock, flags); +} -- cgit v1.2.3