From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/be2iscsi/be_main.h | 1030 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 1030 insertions(+) create mode 100644 drivers/scsi/be2iscsi/be_main.h (limited to 'drivers/scsi/be2iscsi/be_main.h') diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h new file mode 100644 index 000000000..98977c070 --- /dev/null +++ b/drivers/scsi/be2iscsi/be_main.h @@ -0,0 +1,1030 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2017 Broadcom. All Rights Reserved. + * The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. + * + * Contact Information: + * linux-drivers@broadcom.com + */ + +#ifndef _BEISCSI_MAIN_ +#define _BEISCSI_MAIN_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "be2iscsi" +#define BUILD_STR "11.4.0.1" +#define BE_NAME "Emulex OneConnect" \ + "Open-iSCSI Driver version" BUILD_STR +#define DRV_DESC BE_NAME " " "Driver" + +#define BE_VENDOR_ID 0x19A2 +#define ELX_VENDOR_ID 0x10DF +/* DEVICE ID's for BE2 */ +#define BE_DEVICE_ID1 0x212 +#define OC_DEVICE_ID1 0x702 +#define OC_DEVICE_ID2 0x703 + +/* DEVICE ID's for BE3 */ +#define BE_DEVICE_ID2 0x222 +#define OC_DEVICE_ID3 0x712 + +/* DEVICE ID for SKH */ +#define OC_SKH_ID1 0x722 + +#define BE2_IO_DEPTH 1024 +#define BE2_MAX_SESSIONS 256 +#define BE2_TMFS 16 +#define BE2_NOPOUT_REQ 16 +#define BE2_SGE 32 +#define BE2_DEFPDU_HDR_SZ 64 +#define BE2_DEFPDU_DATA_SZ 8192 +#define BE2_MAX_NUM_CQ_PROC 512 + +#define MAX_CPUS 64U +#define BEISCSI_MAX_NUM_CPUS 7 + +#define BEISCSI_VER_STRLEN 32 + +#define BEISCSI_SGLIST_ELEMENTS 30 + +/** + * BE_INVLDT_CMD_TBL_SZ is 128 which is total number commands that can + * be invalidated at a time, consider it before changing the value of + * BEISCSI_CMD_PER_LUN. + */ +#define BEISCSI_CMD_PER_LUN 128 /* scsi_host->cmd_per_lun */ +#define BEISCSI_MAX_SECTORS 1024 /* scsi_host->max_sectors */ +#define BEISCSI_TEMPLATE_HDR_PER_CXN_SIZE 128 /* Template size per cxn */ + +#define BEISCSI_MAX_CMD_LEN 16 /* scsi_host->max_cmd_len */ +#define BEISCSI_NUM_MAX_LUN 256 /* scsi_host->max_lun */ +#define BEISCSI_MAX_FRAGS_INIT 192 + +#define BE_SENSE_INFO_SIZE 258 +#define BE_ISCSI_PDU_HEADER_SIZE 64 +#define BE_MIN_MEM_SIZE 16384 +#define MAX_CMD_SZ 65536 +#define IIOC_SCSI_DATA 0x05 /* Write Operation */ + +/** + * hardware needs the async PDU buffers to be posted in multiples of 8 + * So have atleast 8 of them by default + */ + +#define HWI_GET_ASYNC_PDU_CTX(phwi, ulp_num) \ + (phwi->phwi_ctxt->pasync_ctx[ulp_num]) + +/********* Memory BAR register ************/ +#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc +/** + * Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt + * Disable" may still globally block interrupts in addition to individual + * interrupt masks; a mechanism for the device driver to block all interrupts + * atomically without having to arbitrate for the PCI Interrupt Disable bit + * with the OS. + */ +#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */ + +/********* ISR0 Register offset **********/ +#define CEV_ISR0_OFFSET 0xC18 +#define CEV_ISR_SIZE 4 + +/** + * Macros for reading/writing a protection domain or CSR registers + * in BladeEngine. + */ + +#define DB_TXULP0_OFFSET 0x40 +#define DB_RXULP0_OFFSET 0xA0 +/********* Event Q door bell *************/ +#define DB_EQ_OFFSET DB_CQ_OFFSET +#define DB_EQ_RING_ID_LOW_MASK 0x1FF /* bits 0 - 8 */ +/* Clear the interrupt for this eq */ +#define DB_EQ_CLR_SHIFT (9) /* bit 9 */ +/* Must be 1 */ +#define DB_EQ_EVNT_SHIFT (10) /* bit 10 */ +/* Higher Order EQ_ID bit */ +#define DB_EQ_RING_ID_HIGH_MASK 0x1F /* bits 11 - 15 */ +#define DB_EQ_HIGH_SET_SHIFT 11 +#define DB_EQ_HIGH_FEILD_SHIFT 9 +/* Number of event entries processed */ +#define DB_EQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */ +/* Rearm bit */ +#define DB_EQ_REARM_SHIFT (29) /* bit 29 */ + +/********* Compl Q door bell *************/ +#define DB_CQ_OFFSET 0x120 +#define DB_CQ_RING_ID_LOW_MASK 0x3FF /* bits 0 - 9 */ +/* Higher Order CQ_ID bit */ +#define DB_CQ_RING_ID_HIGH_MASK 0x1F /* bits 11 - 15 */ +#define DB_CQ_HIGH_SET_SHIFT 11 +#define DB_CQ_HIGH_FEILD_SHIFT 10 + +/* Number of event entries processed */ +#define DB_CQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */ +/* Rearm bit */ +#define DB_CQ_REARM_SHIFT (29) /* bit 29 */ + +#define GET_HWI_CONTROLLER_WS(pc) (pc->phwi_ctrlr) +#define HWI_GET_DEF_BUFQ_ID(pc, ulp_num) (((struct hwi_controller *)\ + (GET_HWI_CONTROLLER_WS(pc)))->default_pdu_data[ulp_num].id) +#define HWI_GET_DEF_HDRQ_ID(pc, ulp_num) (((struct hwi_controller *)\ + (GET_HWI_CONTROLLER_WS(pc)))->default_pdu_hdr[ulp_num].id) + +#define PAGES_REQUIRED(x) \ + ((x < PAGE_SIZE) ? 1 : ((x + PAGE_SIZE - 1) / PAGE_SIZE)) + +#define MEM_DESCR_OFFSET 8 +#define BEISCSI_DEFQ_HDR 1 +#define BEISCSI_DEFQ_DATA 0 +enum be_mem_enum { + HWI_MEM_ADDN_CONTEXT, + HWI_MEM_WRB, + HWI_MEM_WRBH, + HWI_MEM_SGLH, + HWI_MEM_SGE, + HWI_MEM_TEMPLATE_HDR_ULP0, + HWI_MEM_ASYNC_HEADER_BUF_ULP0, /* 6 */ + HWI_MEM_ASYNC_DATA_BUF_ULP0, + HWI_MEM_ASYNC_HEADER_RING_ULP0, + HWI_MEM_ASYNC_DATA_RING_ULP0, + HWI_MEM_ASYNC_HEADER_HANDLE_ULP0, + HWI_MEM_ASYNC_DATA_HANDLE_ULP0, /* 11 */ + HWI_MEM_ASYNC_PDU_CONTEXT_ULP0, + HWI_MEM_TEMPLATE_HDR_ULP1, + HWI_MEM_ASYNC_HEADER_BUF_ULP1, /* 14 */ + HWI_MEM_ASYNC_DATA_BUF_ULP1, + HWI_MEM_ASYNC_HEADER_RING_ULP1, + HWI_MEM_ASYNC_DATA_RING_ULP1, + HWI_MEM_ASYNC_HEADER_HANDLE_ULP1, + HWI_MEM_ASYNC_DATA_HANDLE_ULP1, /* 19 */ + HWI_MEM_ASYNC_PDU_CONTEXT_ULP1, + ISCSI_MEM_GLOBAL_HEADER, + SE_MEM_MAX +}; + +struct be_bus_address32 { + unsigned int address_lo; + unsigned int address_hi; +}; + +struct be_bus_address64 { + unsigned long long address; +}; + +struct be_bus_address { + union { + struct be_bus_address32 a32; + struct be_bus_address64 a64; + } u; +}; + +struct mem_array { + struct be_bus_address bus_address; /* Bus address of location */ + void *virtual_address; /* virtual address to the location */ + unsigned int size; /* Size required by memory block */ +}; + +struct be_mem_descriptor { + unsigned int size_in_bytes; /* Size required by memory block */ + unsigned int num_elements; + struct mem_array *mem_array; +}; + +struct sgl_handle { + unsigned int sgl_index; + unsigned int type; + unsigned int cid; + struct iscsi_task *task; + struct iscsi_sge *pfrag; +}; + +struct hba_parameters { + unsigned int ios_per_ctrl; + unsigned int cxns_per_ctrl; + unsigned int icds_per_ctrl; + unsigned int num_sge_per_io; + unsigned int defpdu_hdr_sz; + unsigned int defpdu_data_sz; + unsigned int num_cq_entries; + unsigned int num_eq_entries; + unsigned int wrbs_per_cxn; + unsigned int hwi_ws_sz; +}; + +#define BEISCSI_GET_ULP_FROM_CRI(phwi_ctrlr, cri) \ + (phwi_ctrlr->wrb_context[cri].ulp_num) +struct hwi_wrb_context { + spinlock_t wrb_lock; + struct wrb_handle **pwrb_handle_base; + struct wrb_handle **pwrb_handle_basestd; + struct iscsi_wrb *plast_wrb; + unsigned short alloc_index; + unsigned short free_index; + unsigned short wrb_handles_available; + unsigned short cid; + uint8_t ulp_num; /* ULP to which CID binded */ + uint32_t doorbell_offset; +}; + +struct ulp_cid_info { + unsigned short *cid_array; + unsigned short avlbl_cids; + unsigned short cid_alloc; + unsigned short cid_free; +}; + +#include "be.h" +#define chip_be2(phba) (phba->generation == BE_GEN2) +#define chip_be3_r(phba) (phba->generation == BE_GEN3) +#define is_chip_be2_be3r(phba) (chip_be3_r(phba) || (chip_be2(phba))) + +#define BEISCSI_ULP0 0 +#define BEISCSI_ULP1 1 +#define BEISCSI_ULP_COUNT 2 +#define BEISCSI_ULP0_LOADED 0x01 +#define BEISCSI_ULP1_LOADED 0x02 + +#define BEISCSI_ULP_AVLBL_CID(phba, ulp_num) \ + (((struct ulp_cid_info *)phba->cid_array_info[ulp_num])->avlbl_cids) +#define BEISCSI_ULP0_AVLBL_CID(phba) \ + BEISCSI_ULP_AVLBL_CID(phba, BEISCSI_ULP0) +#define BEISCSI_ULP1_AVLBL_CID(phba) \ + BEISCSI_ULP_AVLBL_CID(phba, BEISCSI_ULP1) + +struct beiscsi_hba { + struct hba_parameters params; + struct hwi_controller *phwi_ctrlr; + unsigned int mem_req[SE_MEM_MAX]; + /* PCI BAR mapped addresses */ + u8 __iomem *csr_va; /* CSR */ + u8 __iomem *db_va; /* Door Bell */ + u8 __iomem *pci_va; /* PCI Config */ + /* PCI representation of our HBA */ + struct pci_dev *pcidev; + unsigned int num_cpus; + unsigned int nxt_cqid; + char *msi_name[MAX_CPUS]; + struct be_mem_descriptor *init_mem; + + unsigned short io_sgl_alloc_index; + unsigned short io_sgl_free_index; + unsigned short io_sgl_hndl_avbl; + struct sgl_handle **io_sgl_hndl_base; + + unsigned short eh_sgl_alloc_index; + unsigned short eh_sgl_free_index; + unsigned short eh_sgl_hndl_avbl; + struct sgl_handle **eh_sgl_hndl_base; + spinlock_t io_sgl_lock; + spinlock_t mgmt_sgl_lock; + spinlock_t async_pdu_lock; + struct list_head hba_queue; +#define BE_MAX_SESSION 2048 +#define BE_INVALID_CID 0xffff +#define BE_SET_CID_TO_CRI(cri_index, cid) \ + (phba->cid_to_cri_map[cid] = cri_index) +#define BE_GET_CRI_FROM_CID(cid) (phba->cid_to_cri_map[cid]) + unsigned short cid_to_cri_map[BE_MAX_SESSION]; + struct ulp_cid_info *cid_array_info[BEISCSI_ULP_COUNT]; + struct iscsi_endpoint **ep_array; + struct beiscsi_conn **conn_table; + struct Scsi_Host *shost; + struct iscsi_iface *ipv4_iface; + struct iscsi_iface *ipv6_iface; + struct { + /** + * group together since they are used most frequently + * for cid to cri conversion + */ +#define BEISCSI_PHYS_PORT_MAX 4 + unsigned int phys_port; + /* valid values of phys_port id are 0, 1, 2, 3 */ + unsigned int eqid_count; + unsigned int cqid_count; + unsigned int iscsi_cid_start[BEISCSI_ULP_COUNT]; +#define BEISCSI_GET_CID_COUNT(phba, ulp_num) \ + (phba->fw_config.iscsi_cid_count[ulp_num]) + unsigned int iscsi_cid_count[BEISCSI_ULP_COUNT]; + unsigned int iscsi_icd_count[BEISCSI_ULP_COUNT]; + unsigned int iscsi_icd_start[BEISCSI_ULP_COUNT]; + unsigned int iscsi_chain_start[BEISCSI_ULP_COUNT]; + unsigned int iscsi_chain_count[BEISCSI_ULP_COUNT]; + + unsigned short iscsi_features; + uint16_t dual_ulp_aware; + unsigned long ulp_supported; + } fw_config; + + unsigned long state; +#define BEISCSI_HBA_ONLINE 0 +#define BEISCSI_HBA_LINK_UP 1 +#define BEISCSI_HBA_BOOT_FOUND 2 +#define BEISCSI_HBA_BOOT_WORK 3 +#define BEISCSI_HBA_UER_SUPP 4 +#define BEISCSI_HBA_PCI_ERR 5 +#define BEISCSI_HBA_FW_TIMEOUT 6 +#define BEISCSI_HBA_IN_UE 7 +#define BEISCSI_HBA_IN_TPE 8 + +/* error bits */ +#define BEISCSI_HBA_IN_ERR ((1 << BEISCSI_HBA_PCI_ERR) | \ + (1 << BEISCSI_HBA_FW_TIMEOUT) | \ + (1 << BEISCSI_HBA_IN_UE) | \ + (1 << BEISCSI_HBA_IN_TPE)) + + u8 optic_state; + struct delayed_work eqd_update; + /* update EQ delay timer every 1000ms */ +#define BEISCSI_EQD_UPDATE_INTERVAL 1000 + struct timer_list hw_check; + /* check for UE every 1000ms */ +#define BEISCSI_UE_DETECT_INTERVAL 1000 + u32 ue2rp; + struct delayed_work recover_port; + struct work_struct sess_work; + + bool mac_addr_set; + u8 mac_address[ETH_ALEN]; + u8 port_name; + u8 port_speed; + char fw_ver_str[BEISCSI_VER_STRLEN]; + struct workqueue_struct *wq; /* The actuak work queue */ + struct be_ctrl_info ctrl; + unsigned int generation; + unsigned int interface_handle; + + struct be_aic_obj aic_obj[MAX_CPUS]; + unsigned int attr_log_enable; + int (*iotask_fn)(struct iscsi_task *, + struct scatterlist *sg, + uint32_t num_sg, uint32_t xferlen, + uint32_t writedir); + struct boot_struct { + int retry; + unsigned int tag; + unsigned int s_handle; + struct be_dma_mem nonemb_cmd; + enum { + BEISCSI_BOOT_REOPEN_SESS = 1, + BEISCSI_BOOT_GET_SHANDLE, + BEISCSI_BOOT_GET_SINFO, + BEISCSI_BOOT_LOGOUT_SESS, + BEISCSI_BOOT_CREATE_KSET, + } action; + struct mgmt_session_info boot_sess; + struct iscsi_boot_kset *boot_kset; + } boot_struct; + struct work_struct boot_work; +}; + +#define beiscsi_hba_in_error(phba) ((phba)->state & BEISCSI_HBA_IN_ERR) +#define beiscsi_hba_is_online(phba) \ + (!beiscsi_hba_in_error((phba)) && \ + test_bit(BEISCSI_HBA_ONLINE, &phba->state)) + +struct beiscsi_session { + struct dma_pool *bhs_pool; +}; + +/** + * struct beiscsi_conn - iscsi connection structure + */ +struct beiscsi_conn { + struct iscsi_conn *conn; + struct beiscsi_hba *phba; + u32 exp_statsn; + u32 doorbell_offset; + u32 beiscsi_conn_cid; + struct beiscsi_endpoint *ep; + unsigned short login_in_progress; + struct wrb_handle *plogin_wrb_handle; + struct sgl_handle *plogin_sgl_handle; + struct beiscsi_session *beiscsi_sess; + struct iscsi_task *task; +}; + +/* This structure is used by the chip */ +struct pdu_data_out { + u32 dw[12]; +}; +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_pdu_data_out { + u8 opcode[6]; /* opcode */ + u8 rsvd0[2]; /* should be 0 */ + u8 rsvd1[7]; + u8 final_bit; /* F bit */ + u8 rsvd2[16]; + u8 ahs_length[8]; /* no AHS */ + u8 data_len_hi[8]; + u8 data_len_lo[16]; /* DataSegmentLength */ + u8 lun[64]; + u8 itt[32]; /* ITT; initiator task tag */ + u8 ttt[32]; /* TTT; valid for R2T or 0xffffffff */ + u8 rsvd3[32]; + u8 exp_stat_sn[32]; + u8 rsvd4[32]; + u8 data_sn[32]; + u8 buffer_offset[32]; + u8 rsvd5[32]; +}; + +struct be_cmd_bhs { + struct iscsi_scsi_req iscsi_hdr; + unsigned char pad1[16]; + struct pdu_data_out iscsi_data_pdu; + unsigned char pad2[BE_SENSE_INFO_SIZE - + sizeof(struct pdu_data_out)]; +}; + +struct beiscsi_io_task { + struct wrb_handle *pwrb_handle; + struct sgl_handle *psgl_handle; + struct beiscsi_conn *conn; + struct scsi_cmnd *scsi_cmnd; + int num_sg; + struct hwi_wrb_context *pwrb_context; + itt_t libiscsi_itt; + struct be_cmd_bhs *cmd_bhs; + struct be_bus_address bhs_pa; + unsigned short bhs_len; + dma_addr_t mtask_addr; + uint32_t mtask_data_count; + uint8_t wrb_type; +}; + +struct be_nonio_bhs { + struct iscsi_hdr iscsi_hdr; + unsigned char pad1[16]; + struct pdu_data_out iscsi_data_pdu; + unsigned char pad2[BE_SENSE_INFO_SIZE - + sizeof(struct pdu_data_out)]; +}; + +struct be_status_bhs { + struct iscsi_scsi_req iscsi_hdr; + unsigned char pad1[16]; + /** + * The plus 2 below is to hold the sense info length that gets + * DMA'ed by RxULP + */ + unsigned char sense_info[BE_SENSE_INFO_SIZE]; +}; + +struct iscsi_sge { + u32 dw[4]; +}; + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_iscsi_sge { + u8 addr_hi[32]; + u8 addr_lo[32]; + u8 sge_offset[22]; /* DWORD 2 */ + u8 rsvd0[9]; /* DWORD 2 */ + u8 last_sge; /* DWORD 2 */ + u8 len[17]; /* DWORD 3 */ + u8 rsvd1[15]; /* DWORD 3 */ +}; + +struct beiscsi_offload_params { + u32 dw[6]; +}; + +#define OFFLD_PARAMS_ERL 0x00000003 +#define OFFLD_PARAMS_DDE 0x00000004 +#define OFFLD_PARAMS_HDE 0x00000008 +#define OFFLD_PARAMS_IR2T 0x00000010 +#define OFFLD_PARAMS_IMD 0x00000020 +#define OFFLD_PARAMS_DATA_SEQ_INORDER 0x00000040 +#define OFFLD_PARAMS_PDU_SEQ_INORDER 0x00000080 +#define OFFLD_PARAMS_MAX_R2T 0x00FFFF00 + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_beiscsi_offload_params { + u8 max_burst_length[32]; + u8 max_send_data_segment_length[32]; + u8 first_burst_length[32]; + u8 erl[2]; + u8 dde[1]; + u8 hde[1]; + u8 ir2t[1]; + u8 imd[1]; + u8 data_seq_inorder[1]; + u8 pdu_seq_inorder[1]; + u8 max_r2t[16]; + u8 pad[8]; + u8 exp_statsn[32]; + u8 max_recv_data_segment_length[32]; +}; + +struct hd_async_handle { + struct list_head link; + struct be_bus_address pa; + void *pbuffer; + u32 buffer_len; + u16 index; + u16 cri; + u8 is_header; + u8 is_final; + u8 in_use; +}; + +#define BEISCSI_ASYNC_HDQ_SIZE(phba, ulp) \ + (BEISCSI_GET_CID_COUNT((phba), (ulp)) * 2) + +/** + * This has list of async PDUs that are waiting to be processed. + * Buffers live in this list for a brief duration before they get + * processed and posted back to hardware. + * Note that we don't really need one cri_wait_queue per async_entry. + * We need one cri_wait_queue per CRI. Its easier to manage if this + * is tagged along with the async_entry. + */ +struct hd_async_entry { + struct cri_wait_queue { + unsigned short hdr_len; + unsigned int bytes_received; + unsigned int bytes_needed; + struct list_head list; + } wq; + /* handles posted to FW resides here */ + struct hd_async_handle *header; + struct hd_async_handle *data; +}; + +struct hd_async_buf_context { + struct be_bus_address pa_base; + void *va_base; + void *ring_base; + struct hd_async_handle *handle_base; + u32 buffer_size; + u16 pi; +}; + +/** + * hd_async_context is declared for each ULP supporting iSCSI function. + */ +struct hd_async_context { + struct hd_async_buf_context async_header; + struct hd_async_buf_context async_data; + u16 num_entries; + /** + * When unsol PDU is in, it needs to be chained till all the bytes are + * received and then processing is done. hd_async_entry is created + * based on the cid_count for each ULP. When unsol PDU comes in based + * on the conn_id it needs to be added to the correct async_entry wq. + * Below defined cid_to_async_cri_map is used to reterive the + * async_cri_map for a particular connection. + * + * This array is initialized after beiscsi_create_wrb_rings returns. + * + * - this method takes more memory space, fixed to 2K + * - any support for connections greater than this the array size needs + * to be incremented + */ +#define BE_GET_ASYNC_CRI_FROM_CID(cid) (pasync_ctx->cid_to_async_cri_map[cid]) + unsigned short cid_to_async_cri_map[BE_MAX_SESSION]; + /** + * This is a variable size array. Don`t add anything after this field!! + */ + struct hd_async_entry *async_entry; +}; + +struct i_t_dpdu_cqe { + u32 dw[4]; +} __packed; + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_i_t_dpdu_cqe { + u8 db_addr_hi[32]; + u8 db_addr_lo[32]; + u8 code[6]; + u8 cid[10]; + u8 dpl[16]; + u8 index[16]; + u8 num_cons[10]; + u8 rsvd0[4]; + u8 final; + u8 valid; +} __packed; + +struct amap_i_t_dpdu_cqe_v2 { + u8 db_addr_hi[32]; /* DWORD 0 */ + u8 db_addr_lo[32]; /* DWORD 1 */ + u8 code[6]; /* DWORD 2 */ + u8 num_cons; /* DWORD 2*/ + u8 rsvd0[8]; /* DWORD 2 */ + u8 dpl[17]; /* DWORD 2 */ + u8 index[16]; /* DWORD 3 */ + u8 cid[13]; /* DWORD 3 */ + u8 rsvd1; /* DWORD 3 */ + u8 final; /* DWORD 3 */ + u8 valid; /* DWORD 3 */ +} __packed; + +#define CQE_VALID_MASK 0x80000000 +#define CQE_CODE_MASK 0x0000003F +#define CQE_CID_MASK 0x0000FFC0 + +#define EQE_VALID_MASK 0x00000001 +#define EQE_MAJORCODE_MASK 0x0000000E +#define EQE_RESID_MASK 0xFFFF0000 + +struct be_eq_entry { + u32 dw[1]; +} __packed; + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_eq_entry { + u8 valid; /* DWORD 0 */ + u8 major_code[3]; /* DWORD 0 */ + u8 minor_code[12]; /* DWORD 0 */ + u8 resource_id[16]; /* DWORD 0 */ + +} __packed; + +struct cq_db { + u32 dw[1]; +} __packed; + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_cq_db { + u8 qid[10]; + u8 event[1]; + u8 rsvd0[5]; + u8 num_popped[13]; + u8 rearm[1]; + u8 rsvd1[2]; +} __packed; + +void beiscsi_process_eq(struct beiscsi_hba *phba); + +struct iscsi_wrb { + u32 dw[16]; +} __packed; + +#define WRB_TYPE_MASK 0xF0000000 +#define SKH_WRB_TYPE_OFFSET 27 +#define BE_WRB_TYPE_OFFSET 28 + +#define ADAPTER_SET_WRB_TYPE(pwrb, wrb_type, type_offset) \ + (pwrb->dw[0] |= (wrb_type << type_offset)) + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_iscsi_wrb { + u8 lun[14]; /* DWORD 0 */ + u8 lt; /* DWORD 0 */ + u8 invld; /* DWORD 0 */ + u8 wrb_idx[8]; /* DWORD 0 */ + u8 dsp; /* DWORD 0 */ + u8 dmsg; /* DWORD 0 */ + u8 undr_run; /* DWORD 0 */ + u8 over_run; /* DWORD 0 */ + u8 type[4]; /* DWORD 0 */ + u8 ptr2nextwrb[8]; /* DWORD 1 */ + u8 r2t_exp_dtl[24]; /* DWORD 1 */ + u8 sgl_icd_idx[12]; /* DWORD 2 */ + u8 rsvd0[20]; /* DWORD 2 */ + u8 exp_data_sn[32]; /* DWORD 3 */ + u8 iscsi_bhs_addr_hi[32]; /* DWORD 4 */ + u8 iscsi_bhs_addr_lo[32]; /* DWORD 5 */ + u8 cmdsn_itt[32]; /* DWORD 6 */ + u8 dif_ref_tag[32]; /* DWORD 7 */ + u8 sge0_addr_hi[32]; /* DWORD 8 */ + u8 sge0_addr_lo[32]; /* DWORD 9 */ + u8 sge0_offset[22]; /* DWORD 10 */ + u8 pbs; /* DWORD 10 */ + u8 dif_mode[2]; /* DWORD 10 */ + u8 rsvd1[6]; /* DWORD 10 */ + u8 sge0_last; /* DWORD 10 */ + u8 sge0_len[17]; /* DWORD 11 */ + u8 dif_meta_tag[14]; /* DWORD 11 */ + u8 sge0_in_ddr; /* DWORD 11 */ + u8 sge1_addr_hi[32]; /* DWORD 12 */ + u8 sge1_addr_lo[32]; /* DWORD 13 */ + u8 sge1_r2t_offset[22]; /* DWORD 14 */ + u8 rsvd2[9]; /* DWORD 14 */ + u8 sge1_last; /* DWORD 14 */ + u8 sge1_len[17]; /* DWORD 15 */ + u8 ref_sgl_icd_idx[12]; /* DWORD 15 */ + u8 rsvd3[2]; /* DWORD 15 */ + u8 sge1_in_ddr; /* DWORD 15 */ + +} __packed; + +struct amap_iscsi_wrb_v2 { + u8 r2t_exp_dtl[25]; /* DWORD 0 */ + u8 rsvd0[2]; /* DWORD 0*/ + u8 type[5]; /* DWORD 0 */ + u8 ptr2nextwrb[8]; /* DWORD 1 */ + u8 wrb_idx[8]; /* DWORD 1 */ + u8 lun[16]; /* DWORD 1 */ + u8 sgl_idx[16]; /* DWORD 2 */ + u8 ref_sgl_icd_idx[16]; /* DWORD 2 */ + u8 exp_data_sn[32]; /* DWORD 3 */ + u8 iscsi_bhs_addr_hi[32]; /* DWORD 4 */ + u8 iscsi_bhs_addr_lo[32]; /* DWORD 5 */ + u8 cq_id[16]; /* DWORD 6 */ + u8 rsvd1[16]; /* DWORD 6 */ + u8 cmdsn_itt[32]; /* DWORD 7 */ + u8 sge0_addr_hi[32]; /* DWORD 8 */ + u8 sge0_addr_lo[32]; /* DWORD 9 */ + u8 sge0_offset[24]; /* DWORD 10 */ + u8 rsvd2[7]; /* DWORD 10 */ + u8 sge0_last; /* DWORD 10 */ + u8 sge0_len[17]; /* DWORD 11 */ + u8 rsvd3[7]; /* DWORD 11 */ + u8 diff_enbl; /* DWORD 11 */ + u8 u_run; /* DWORD 11 */ + u8 o_run; /* DWORD 11 */ + u8 invld; /* DWORD 11 */ + u8 dsp; /* DWORD 11 */ + u8 dmsg; /* DWORD 11 */ + u8 rsvd4; /* DWORD 11 */ + u8 lt; /* DWORD 11 */ + u8 sge1_addr_hi[32]; /* DWORD 12 */ + u8 sge1_addr_lo[32]; /* DWORD 13 */ + u8 sge1_r2t_offset[24]; /* DWORD 14 */ + u8 rsvd5[7]; /* DWORD 14 */ + u8 sge1_last; /* DWORD 14 */ + u8 sge1_len[17]; /* DWORD 15 */ + u8 rsvd6[15]; /* DWORD 15 */ +} __packed; + + +struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid, + struct hwi_wrb_context **pcontext); +void +free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle); + +void beiscsi_free_mgmt_task_handles(struct beiscsi_conn *beiscsi_conn, + struct iscsi_task *task); + +void hwi_ring_cq_db(struct beiscsi_hba *phba, + unsigned int id, unsigned int num_processed, + unsigned char rearm); + +unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq, int budget); +void beiscsi_process_mcc_cq(struct beiscsi_hba *phba); + +struct pdu_nop_out { + u32 dw[12]; +}; + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_pdu_nop_out { + u8 opcode[6]; /* opcode 0x00 */ + u8 i_bit; /* I Bit */ + u8 x_bit; /* reserved; should be 0 */ + u8 fp_bit_filler1[7]; + u8 f_bit; /* always 1 */ + u8 reserved1[16]; + u8 ahs_length[8]; /* no AHS */ + u8 data_len_hi[8]; + u8 data_len_lo[16]; /* DataSegmentLength */ + u8 lun[64]; + u8 itt[32]; /* initiator id for ping or 0xffffffff */ + u8 ttt[32]; /* target id for ping or 0xffffffff */ + u8 cmd_sn[32]; + u8 exp_stat_sn[32]; + u8 reserved5[128]; +}; + +#define PDUBASE_OPCODE_MASK 0x0000003F +#define PDUBASE_DATALENHI_MASK 0x0000FF00 +#define PDUBASE_DATALENLO_MASK 0xFFFF0000 + +struct pdu_base { + u32 dw[16]; +} __packed; + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +struct amap_pdu_base { + u8 opcode[6]; + u8 i_bit; /* immediate bit */ + u8 x_bit; /* reserved, always 0 */ + u8 reserved1[24]; /* opcode-specific fields */ + u8 ahs_length[8]; /* length units is 4 byte words */ + u8 data_len_hi[8]; + u8 data_len_lo[16]; /* DatasegmentLength */ + u8 lun[64]; /* lun or opcode-specific fields */ + u8 itt[32]; /* initiator task tag */ + u8 reserved4[224]; +}; + +struct iscsi_target_context_update_wrb { + u32 dw[16]; +} __packed; + +/** + * Pseudo amap definition in which each bit of the actual structure is defined + * as a byte: used to calculate offset/shift/mask of each field + */ +#define BE_TGT_CTX_UPDT_CMD 0x07 +struct amap_iscsi_target_context_update_wrb { + u8 lun[14]; /* DWORD 0 */ + u8 lt; /* DWORD 0 */ + u8 invld; /* DWORD 0 */ + u8 wrb_idx[8]; /* DWORD 0 */ + u8 dsp; /* DWORD 0 */ + u8 dmsg; /* DWORD 0 */ + u8 undr_run; /* DWORD 0 */ + u8 over_run; /* DWORD 0 */ + u8 type[4]; /* DWORD 0 */ + u8 ptr2nextwrb[8]; /* DWORD 1 */ + u8 max_burst_length[19]; /* DWORD 1 */ + u8 rsvd0[5]; /* DWORD 1 */ + u8 rsvd1[15]; /* DWORD 2 */ + u8 max_send_data_segment_length[17]; /* DWORD 2 */ + u8 first_burst_length[14]; /* DWORD 3 */ + u8 rsvd2[2]; /* DWORD 3 */ + u8 tx_wrbindex_drv_msg[8]; /* DWORD 3 */ + u8 rsvd3[5]; /* DWORD 3 */ + u8 session_state[3]; /* DWORD 3 */ + u8 rsvd4[16]; /* DWORD 4 */ + u8 tx_jumbo; /* DWORD 4 */ + u8 hde; /* DWORD 4 */ + u8 dde; /* DWORD 4 */ + u8 erl[2]; /* DWORD 4 */ + u8 domain_id[5]; /* DWORD 4 */ + u8 mode; /* DWORD 4 */ + u8 imd; /* DWORD 4 */ + u8 ir2t; /* DWORD 4 */ + u8 notpredblq[2]; /* DWORD 4 */ + u8 compltonack; /* DWORD 4 */ + u8 stat_sn[32]; /* DWORD 5 */ + u8 pad_buffer_addr_hi[32]; /* DWORD 6 */ + u8 pad_buffer_addr_lo[32]; /* DWORD 7 */ + u8 pad_addr_hi[32]; /* DWORD 8 */ + u8 pad_addr_lo[32]; /* DWORD 9 */ + u8 rsvd5[32]; /* DWORD 10 */ + u8 rsvd6[32]; /* DWORD 11 */ + u8 rsvd7[32]; /* DWORD 12 */ + u8 rsvd8[32]; /* DWORD 13 */ + u8 rsvd9[32]; /* DWORD 14 */ + u8 rsvd10[32]; /* DWORD 15 */ + +} __packed; + +#define BEISCSI_MAX_RECV_DATASEG_LEN (64 * 1024) +#define BEISCSI_MAX_CXNS 1 +struct amap_iscsi_target_context_update_wrb_v2 { + u8 max_burst_length[24]; /* DWORD 0 */ + u8 rsvd0[3]; /* DWORD 0 */ + u8 type[5]; /* DWORD 0 */ + u8 ptr2nextwrb[8]; /* DWORD 1 */ + u8 wrb_idx[8]; /* DWORD 1 */ + u8 rsvd1[16]; /* DWORD 1 */ + u8 max_send_data_segment_length[24]; /* DWORD 2 */ + u8 rsvd2[8]; /* DWORD 2 */ + u8 first_burst_length[24]; /* DWORD 3 */ + u8 rsvd3[8]; /* DOWRD 3 */ + u8 max_r2t[16]; /* DWORD 4 */ + u8 rsvd4; /* DWORD 4 */ + u8 hde; /* DWORD 4 */ + u8 dde; /* DWORD 4 */ + u8 erl[2]; /* DWORD 4 */ + u8 rsvd5[6]; /* DWORD 4 */ + u8 imd; /* DWORD 4 */ + u8 ir2t; /* DWORD 4 */ + u8 rsvd6[3]; /* DWORD 4 */ + u8 stat_sn[32]; /* DWORD 5 */ + u8 rsvd7[32]; /* DWORD 6 */ + u8 rsvd8[32]; /* DWORD 7 */ + u8 max_recv_dataseg_len[24]; /* DWORD 8 */ + u8 rsvd9[8]; /* DWORD 8 */ + u8 rsvd10[32]; /* DWORD 9 */ + u8 rsvd11[32]; /* DWORD 10 */ + u8 max_cxns[16]; /* DWORD 11 */ + u8 rsvd12[11]; /* DWORD 11*/ + u8 invld; /* DWORD 11 */ + u8 rsvd13;/* DWORD 11*/ + u8 dmsg; /* DWORD 11 */ + u8 data_seq_inorder; /* DWORD 11 */ + u8 pdu_seq_inorder; /* DWORD 11 */ + u8 rsvd14[32]; /*DWORD 12 */ + u8 rsvd15[32]; /* DWORD 13 */ + u8 rsvd16[32]; /* DWORD 14 */ + u8 rsvd17[32]; /* DWORD 15 */ +} __packed; + + +struct be_ring { + u32 pages; /* queue size in pages */ + u32 id; /* queue id assigned by beklib */ + u32 num; /* number of elements in queue */ + u32 cidx; /* consumer index */ + u32 pidx; /* producer index -- not used by most rings */ + u32 item_size; /* size in bytes of one object */ + u8 ulp_num; /* ULP to which CID binded */ + u16 register_set; + u16 doorbell_format; + u32 doorbell_offset; + + void *va; /* The virtual address of the ring. This + * should be last to allow 32 & 64 bit debugger + * extensions to work. + */ +}; + +struct hwi_controller { + struct hwi_wrb_context *wrb_context; + struct be_ring default_pdu_hdr[BEISCSI_ULP_COUNT]; + struct be_ring default_pdu_data[BEISCSI_ULP_COUNT]; + struct hwi_context_memory *phwi_ctxt; +}; + +enum hwh_type_enum { + HWH_TYPE_IO = 1, + HWH_TYPE_LOGOUT = 2, + HWH_TYPE_TMF = 3, + HWH_TYPE_NOP = 4, + HWH_TYPE_IO_RD = 5, + HWH_TYPE_LOGIN = 11, + HWH_TYPE_INVALID = 0xFFFFFFFF +}; + +struct wrb_handle { + unsigned short wrb_index; + struct iscsi_task *pio_handle; + struct iscsi_wrb *pwrb; +}; + +struct hwi_context_memory { + struct be_eq_obj be_eq[MAX_CPUS]; + struct be_queue_info be_cq[MAX_CPUS - 1]; + + struct be_queue_info *be_wrbq; + /** + * Create array of ULP number for below entries as DEFQ + * will be created for both ULP if iSCSI Protocol is + * loaded on both ULP. + */ + struct be_queue_info be_def_hdrq[BEISCSI_ULP_COUNT]; + struct be_queue_info be_def_dataq[BEISCSI_ULP_COUNT]; + struct hd_async_context *pasync_ctx[BEISCSI_ULP_COUNT]; +}; + +void beiscsi_start_boot_work(struct beiscsi_hba *phba, unsigned int s_handle); + +/* Logging related definitions */ +#define BEISCSI_LOG_INIT 0x0001 /* Initialization events */ +#define BEISCSI_LOG_MBOX 0x0002 /* Mailbox Events */ +#define BEISCSI_LOG_MISC 0x0004 /* Miscllaneous Events */ +#define BEISCSI_LOG_EH 0x0008 /* Error Handler */ +#define BEISCSI_LOG_IO 0x0010 /* IO Code Path */ +#define BEISCSI_LOG_CONFIG 0x0020 /* CONFIG Code Path */ +#define BEISCSI_LOG_ISCSI 0x0040 /* SCSI/iSCSI Protocol related Logs */ + +#define __beiscsi_log(phba, level, fmt, arg...) \ + shost_printk(level, phba->shost, fmt, __LINE__, ##arg) + +#define beiscsi_log(phba, level, mask, fmt, arg...) \ +do { \ + uint32_t log_value = phba->attr_log_enable; \ + if (((mask) & log_value) || (level[1] <= '3')) \ + __beiscsi_log(phba, level, fmt, ##arg); \ +} while (0); + +#endif -- cgit v1.2.3