From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/device_handler/scsi_dh_emc.c | 545 ++++++++++++++++++++++++++++++ 1 file changed, 545 insertions(+) create mode 100644 drivers/scsi/device_handler/scsi_dh_emc.c (limited to 'drivers/scsi/device_handler/scsi_dh_emc.c') diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c new file mode 100644 index 000000000..2e21ab447 --- /dev/null +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -0,0 +1,545 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Target driver for EMC CLARiiON AX/CX-series hardware. + * Based on code from Lars Marowsky-Bree + * and Ed Goggin . + * + * Copyright (C) 2006 Red Hat, Inc. All rights reserved. + * Copyright (C) 2006 Mike Christie + */ +#include +#include +#include +#include +#include +#include + +#define CLARIION_NAME "emc" + +#define CLARIION_TRESPASS_PAGE 0x22 +#define CLARIION_BUFFER_SIZE 0xFC +#define CLARIION_TIMEOUT (60 * HZ) +#define CLARIION_RETRIES 3 +#define CLARIION_UNBOUND_LU -1 +#define CLARIION_SP_A 0 +#define CLARIION_SP_B 1 + +/* Flags */ +#define CLARIION_SHORT_TRESPASS 1 +#define CLARIION_HONOR_RESERVATIONS 2 + +/* LUN states */ +#define CLARIION_LUN_UNINITIALIZED -1 +#define CLARIION_LUN_UNBOUND 0 +#define CLARIION_LUN_BOUND 1 +#define CLARIION_LUN_OWNED 2 + +static unsigned char long_trespass[] = { + 0, 0, 0, 0, 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x09, /* Page length - 2 */ + 0x01, /* Trespass code */ + 0xff, 0xff, /* Trespass target */ + 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */ +}; + +static unsigned char short_trespass[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x02, /* Page length - 2 */ + 0x01, /* Trespass code */ + 0xff, /* Trespass target */ +}; + +static const char * lun_state[] = +{ + "not bound", + "bound", + "owned", +}; + +struct clariion_dh_data { + /* + * Flags: + * CLARIION_SHORT_TRESPASS + * Use short trespass command (FC-series) or the long version + * (default for AX/CX CLARiiON arrays). + * + * CLARIION_HONOR_RESERVATIONS + * Whether or not (default) to honor SCSI reservations when + * initiating a switch-over. + */ + unsigned flags; + /* + * I/O buffer for both MODE_SELECT and INQUIRY commands. + */ + unsigned char buffer[CLARIION_BUFFER_SIZE]; + /* + * LUN state + */ + int lun_state; + /* + * SP Port number + */ + int port; + /* + * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this + * path's mapped LUN + */ + int default_sp; + /* + * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this + * path's mapped LUN + */ + int current_sp; +}; + +/* + * Parse MODE_SELECT cmd reply. + */ +static int trespass_endio(struct scsi_device *sdev, + struct scsi_sense_hdr *sshdr) +{ + int err = SCSI_DH_IO; + + sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, " + "0x%2x, 0x%2x while sending CLARiiON trespass " + "command.\n", CLARIION_NAME, sshdr->sense_key, + sshdr->asc, sshdr->ascq); + + if (sshdr->sense_key == 0x05 && sshdr->asc == 0x04 && + sshdr->ascq == 0x00) { + /* + * Array based copy in progress -- do not send + * mode_select or copy will be aborted mid-stream. + */ + sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in " + "progress while sending CLARiiON trespass " + "command.\n", CLARIION_NAME); + err = SCSI_DH_DEV_TEMP_BUSY; + } else if (sshdr->sense_key == 0x02 && sshdr->asc == 0x04 && + sshdr->ascq == 0x03) { + /* + * LUN Not Ready - Manual Intervention Required + * indicates in-progress ucode upgrade (NDU). + */ + sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress " + "ucode upgrade NDU operation while sending " + "CLARiiON trespass command.\n", CLARIION_NAME); + err = SCSI_DH_DEV_TEMP_BUSY; + } else + err = SCSI_DH_DEV_FAILED; + return err; +} + +static int parse_sp_info_reply(struct scsi_device *sdev, + struct clariion_dh_data *csdev) +{ + int err = SCSI_DH_OK; + + /* check for in-progress ucode upgrade (NDU) */ + if (csdev->buffer[48] != 0) { + sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress " + "ucode upgrade NDU operation while finding " + "current active SP.", CLARIION_NAME); + err = SCSI_DH_DEV_TEMP_BUSY; + goto out; + } + if (csdev->buffer[4] > 2) { + /* Invalid buffer format */ + sdev_printk(KERN_NOTICE, sdev, + "%s: invalid VPD page 0xC0 format\n", + CLARIION_NAME); + err = SCSI_DH_NOSYS; + goto out; + } + switch (csdev->buffer[28] & 0x0f) { + case 6: + sdev_printk(KERN_NOTICE, sdev, + "%s: ALUA failover mode detected\n", + CLARIION_NAME); + break; + case 4: + /* Linux failover */ + break; + default: + sdev_printk(KERN_WARNING, sdev, + "%s: Invalid failover mode %d\n", + CLARIION_NAME, csdev->buffer[28] & 0x0f); + err = SCSI_DH_NOSYS; + goto out; + } + + csdev->default_sp = csdev->buffer[5]; + csdev->lun_state = csdev->buffer[4]; + csdev->current_sp = csdev->buffer[8]; + csdev->port = csdev->buffer[7]; + if (csdev->lun_state == CLARIION_LUN_OWNED) + sdev->access_state = SCSI_ACCESS_STATE_OPTIMAL; + else + sdev->access_state = SCSI_ACCESS_STATE_STANDBY; + if (csdev->default_sp == csdev->current_sp) + sdev->access_state |= SCSI_ACCESS_STATE_PREFERRED; +out: + return err; +} + +#define emc_default_str "FC (Legacy)" + +static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer) +{ + unsigned char len = buffer[4] + 5; + char *sp_model = NULL; + unsigned char sp_len, serial_len; + + if (len < 160) { + sdev_printk(KERN_WARNING, sdev, + "%s: Invalid information section length %d\n", + CLARIION_NAME, len); + /* Check for old FC arrays */ + if (!strncmp(buffer + 8, "DGC", 3)) { + /* Old FC array, not supporting extended information */ + sp_model = emc_default_str; + } + goto out; + } + + /* + * Parse extended information for SP model number + */ + serial_len = buffer[160]; + if (serial_len == 0 || serial_len + 161 > len) { + sdev_printk(KERN_WARNING, sdev, + "%s: Invalid array serial number length %d\n", + CLARIION_NAME, serial_len); + goto out; + } + sp_len = buffer[99]; + if (sp_len == 0 || serial_len + sp_len + 161 > len) { + sdev_printk(KERN_WARNING, sdev, + "%s: Invalid model number length %d\n", + CLARIION_NAME, sp_len); + goto out; + } + sp_model = &buffer[serial_len + 161]; + /* Strip whitespace at the end */ + while (sp_len > 1 && sp_model[sp_len - 1] == ' ') + sp_len--; + + sp_model[sp_len] = '\0'; + +out: + return sp_model; +} + +static int send_trespass_cmd(struct scsi_device *sdev, + struct clariion_dh_data *csdev) +{ + unsigned char *page22; + unsigned char cdb[MAX_COMMAND_SIZE]; + int err, res = SCSI_DH_OK, len; + struct scsi_sense_hdr sshdr; + blk_opf_t req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; + + if (csdev->flags & CLARIION_SHORT_TRESPASS) { + page22 = short_trespass; + if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS)) + /* Set Honor Reservations bit */ + page22[6] |= 0x80; + len = sizeof(short_trespass); + cdb[0] = MODE_SELECT; + cdb[1] = 0x10; + cdb[4] = len; + } else { + page22 = long_trespass; + if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS)) + /* Set Honor Reservations bit */ + page22[10] |= 0x80; + len = sizeof(long_trespass); + cdb[0] = MODE_SELECT_10; + cdb[8] = len; + } + BUG_ON((len > CLARIION_BUFFER_SIZE)); + memcpy(csdev->buffer, page22, len); + + err = scsi_execute(sdev, cdb, DMA_TO_DEVICE, csdev->buffer, len, NULL, + &sshdr, CLARIION_TIMEOUT * HZ, CLARIION_RETRIES, + req_flags, 0, NULL); + if (err) { + if (scsi_sense_valid(&sshdr)) + res = trespass_endio(sdev, &sshdr); + else { + sdev_printk(KERN_INFO, sdev, + "%s: failed to send MODE SELECT: %x\n", + CLARIION_NAME, err); + res = SCSI_DH_IO; + } + } + + return res; +} + +static enum scsi_disposition clariion_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03) + /* + * LUN Not Ready - Manual Intervention Required + * indicates this is a passive path. + * + * FIXME: However, if this is seen and EVPD C0 + * indicates that this is due to a NDU in + * progress, we should set FAIL_PATH too. + * This indicates we might have to do a SCSI + * inquiry in the end_io path. Ugh. + * + * Can return FAILED only when we want the error + * recovery process to kick in. + */ + return SUCCESS; + break; + case ILLEGAL_REQUEST: + if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01) + /* + * An array based copy is in progress. Do not + * fail the path, do not bypass to another PG, + * do not retry. Fail the IO immediately. + * (Actually this is the same conclusion as in + * the default handler, but lets make sure.) + * + * Can return FAILED only when we want the error + * recovery process to kick in. + */ + return SUCCESS; + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) + /* + * Unit Attention Code. This is the first IO + * to the new path, so just retry. + */ + return ADD_TO_MLQUEUE; + break; + } + + return SCSI_RETURN_NOT_HANDLED; +} + +static blk_status_t clariion_prep_fn(struct scsi_device *sdev, + struct request *req) +{ + struct clariion_dh_data *h = sdev->handler_data; + + if (h->lun_state != CLARIION_LUN_OWNED) { + req->rq_flags |= RQF_QUIET; + return BLK_STS_IOERR; + } + + return BLK_STS_OK; +} + +static int clariion_std_inquiry(struct scsi_device *sdev, + struct clariion_dh_data *csdev) +{ + int err = SCSI_DH_OK; + char *sp_model; + + sp_model = parse_sp_model(sdev, sdev->inquiry); + if (!sp_model) { + err = SCSI_DH_DEV_UNSUPP; + goto out; + } + + /* + * FC Series arrays do not support long trespass + */ + if (!strlen(sp_model) || !strncmp(sp_model, "FC",2)) + csdev->flags |= CLARIION_SHORT_TRESPASS; + + sdev_printk(KERN_INFO, sdev, + "%s: detected Clariion %s, flags %x\n", + CLARIION_NAME, sp_model, csdev->flags); +out: + return err; +} + +static int clariion_send_inquiry(struct scsi_device *sdev, + struct clariion_dh_data *csdev) +{ + int err = SCSI_DH_IO; + + if (!scsi_get_vpd_page(sdev, 0xC0, csdev->buffer, + CLARIION_BUFFER_SIZE)) + err = parse_sp_info_reply(sdev, csdev); + + return err; +} + +static int clariion_activate(struct scsi_device *sdev, + activate_complete fn, void *data) +{ + struct clariion_dh_data *csdev = sdev->handler_data; + int result; + + result = clariion_send_inquiry(sdev, csdev); + if (result != SCSI_DH_OK) + goto done; + + if (csdev->lun_state == CLARIION_LUN_OWNED) + goto done; + + result = send_trespass_cmd(sdev, csdev); + if (result != SCSI_DH_OK) + goto done; + sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n", + CLARIION_NAME, + csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" ); + + /* Update status */ + result = clariion_send_inquiry(sdev, csdev); + if (result != SCSI_DH_OK) + goto done; + +done: + sdev_printk(KERN_INFO, sdev, + "%s: at SP %c Port %d (%s, default SP %c)\n", + CLARIION_NAME, csdev->current_sp + 'A', + csdev->port, lun_state[csdev->lun_state], + csdev->default_sp + 'A'); + + if (fn) + fn(data, result); + return 0; +} +/* + * params - parameters in the following format + * "no_of_params\0param1\0param2\0param3\0...\0" + * for example, string for 2 parameters with value 10 and 21 + * is specified as "2\010\021\0". + */ +static int clariion_set_params(struct scsi_device *sdev, const char *params) +{ + struct clariion_dh_data *csdev = sdev->handler_data; + unsigned int hr = 0, st = 0, argc; + const char *p = params; + int result = SCSI_DH_OK; + + if ((sscanf(params, "%u", &argc) != 1) || (argc != 2)) + return -EINVAL; + + while (*p++) + ; + if ((sscanf(p, "%u", &st) != 1) || (st > 1)) + return -EINVAL; + + while (*p++) + ; + if ((sscanf(p, "%u", &hr) != 1) || (hr > 1)) + return -EINVAL; + + if (st) + csdev->flags |= CLARIION_SHORT_TRESPASS; + else + csdev->flags &= ~CLARIION_SHORT_TRESPASS; + + if (hr) + csdev->flags |= CLARIION_HONOR_RESERVATIONS; + else + csdev->flags &= ~CLARIION_HONOR_RESERVATIONS; + + /* + * If this path is owned, we have to send a trespass command + * with the new parameters. If not, simply return. Next trespass + * command would use the parameters. + */ + if (csdev->lun_state != CLARIION_LUN_OWNED) + goto done; + + csdev->lun_state = CLARIION_LUN_UNINITIALIZED; + result = send_trespass_cmd(sdev, csdev); + if (result != SCSI_DH_OK) + goto done; + + /* Update status */ + result = clariion_send_inquiry(sdev, csdev); + +done: + return result; +} + +static int clariion_bus_attach(struct scsi_device *sdev) +{ + struct clariion_dh_data *h; + int err; + + h = kzalloc(sizeof(*h) , GFP_KERNEL); + if (!h) + return SCSI_DH_NOMEM; + h->lun_state = CLARIION_LUN_UNINITIALIZED; + h->default_sp = CLARIION_UNBOUND_LU; + h->current_sp = CLARIION_UNBOUND_LU; + + err = clariion_std_inquiry(sdev, h); + if (err != SCSI_DH_OK) + goto failed; + + err = clariion_send_inquiry(sdev, h); + if (err != SCSI_DH_OK) + goto failed; + + sdev_printk(KERN_INFO, sdev, + "%s: connected to SP %c Port %d (%s, default SP %c)\n", + CLARIION_NAME, h->current_sp + 'A', + h->port, lun_state[h->lun_state], + h->default_sp + 'A'); + + sdev->handler_data = h; + return SCSI_DH_OK; + +failed: + kfree(h); + return err; +} + +static void clariion_bus_detach(struct scsi_device *sdev) +{ + kfree(sdev->handler_data); + sdev->handler_data = NULL; +} + +static struct scsi_device_handler clariion_dh = { + .name = CLARIION_NAME, + .module = THIS_MODULE, + .attach = clariion_bus_attach, + .detach = clariion_bus_detach, + .check_sense = clariion_check_sense, + .activate = clariion_activate, + .prep_fn = clariion_prep_fn, + .set_params = clariion_set_params, +}; + +static int __init clariion_init(void) +{ + int r; + + r = scsi_register_device_handler(&clariion_dh); + if (r != 0) + printk(KERN_ERR "%s: Failed to register scsi device handler.", + CLARIION_NAME); + return r; +} + +static void __exit clariion_exit(void) +{ + scsi_unregister_device_handler(&clariion_dh); +} + +module_init(clariion_init); +module_exit(clariion_exit); + +MODULE_DESCRIPTION("EMC CX/AX/FC-family driver"); +MODULE_AUTHOR("Mike Christie , Chandra Seetharaman "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3