From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/fdomain.h | 114 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 drivers/scsi/fdomain.h (limited to 'drivers/scsi/fdomain.h') diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h new file mode 100644 index 000000000..93afcee20 --- /dev/null +++ b/drivers/scsi/fdomain.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#define FDOMAIN_REGION_SIZE 0x10 +#define FDOMAIN_BIOS_SIZE 0x2000 + +enum { + in_arbitration = 0x02, + in_selection = 0x04, + in_other = 0x08, + disconnect = 0x10, + aborted = 0x20, + sent_ident = 0x40, +}; + +/* (@) = not present on TMC1800, (#) = not present on TMC1800 and TMC18C50 */ +#define REG_SCSI_DATA 0 /* R/W: SCSI Data (with ACK) */ +#define REG_BSTAT 1 /* R: SCSI Bus Status */ +#define BSTAT_BSY BIT(0) /* Busy */ +#define BSTAT_MSG BIT(1) /* Message */ +#define BSTAT_IO BIT(2) /* Input/Output */ +#define BSTAT_CMD BIT(3) /* Command/Data */ +#define BSTAT_REQ BIT(4) /* Request and Not Ack */ +#define BSTAT_SEL BIT(5) /* Select */ +#define BSTAT_ACK BIT(6) /* Acknowledge and Request */ +#define BSTAT_ATN BIT(7) /* Attention */ +#define REG_BCTL 1 /* W: SCSI Bus Control */ +#define BCTL_RST BIT(0) /* Bus Reset */ +#define BCTL_SEL BIT(1) /* Select */ +#define BCTL_BSY BIT(2) /* Busy */ +#define BCTL_ATN BIT(3) /* Attention */ +#define BCTL_IO BIT(4) /* Input/Output */ +#define BCTL_CMD BIT(5) /* Command/Data */ +#define BCTL_MSG BIT(6) /* Message */ +#define BCTL_BUSEN BIT(7) /* Enable bus drivers */ +#define REG_ASTAT 2 /* R: Adapter Status 1 */ +#define ASTAT_IRQ BIT(0) /* Interrupt active */ +#define ASTAT_ARB BIT(1) /* Arbitration complete */ +#define ASTAT_PARERR BIT(2) /* Parity error */ +#define ASTAT_RST BIT(3) /* SCSI reset occurred */ +#define ASTAT_FIFODIR BIT(4) /* FIFO direction */ +#define ASTAT_FIFOEN BIT(5) /* FIFO enabled */ +#define ASTAT_PAREN BIT(6) /* Parity enabled */ +#define ASTAT_BUSEN BIT(7) /* Bus drivers enabled */ +#define REG_ICTL 2 /* W: Interrupt Control */ +#define ICTL_FIFO_MASK 0x0f /* FIFO threshold, 1/16 FIFO size */ +#define ICTL_FIFO BIT(4) /* Int. on FIFO count */ +#define ICTL_ARB BIT(5) /* Int. on Arbitration complete */ +#define ICTL_SEL BIT(6) /* Int. on SCSI Select */ +#define ICTL_REQ BIT(7) /* Int. on SCSI Request */ +#define REG_FSTAT 3 /* R: Adapter Status 2 (FIFO) - (@) */ +#define FSTAT_ONOTEMPTY BIT(0) /* Output FIFO not empty */ +#define FSTAT_INOTEMPTY BIT(1) /* Input FIFO not empty */ +#define FSTAT_NOTEMPTY BIT(2) /* Main FIFO not empty */ +#define FSTAT_NOTFULL BIT(3) /* Main FIFO not full */ +#define REG_MCTL 3 /* W: SCSI Data Mode Control */ +#define MCTL_ACK_MASK 0x0f /* Acknowledge period */ +#define MCTL_ACTDEASS BIT(4) /* Active deassert of REQ and ACK */ +#define MCTL_TARGET BIT(5) /* Enable target mode */ +#define MCTL_FASTSYNC BIT(6) /* Enable Fast Synchronous */ +#define MCTL_SYNC BIT(7) /* Enable Synchronous */ +#define REG_INTCOND 4 /* R: Interrupt Condition - (@) */ +#define IRQ_FIFO BIT(1) /* FIFO interrupt */ +#define IRQ_REQ BIT(2) /* SCSI Request interrupt */ +#define IRQ_SEL BIT(3) /* SCSI Select interrupt */ +#define IRQ_ARB BIT(4) /* SCSI Arbitration interrupt */ +#define IRQ_RST BIT(5) /* SCSI Reset interrupt */ +#define IRQ_FORCED BIT(6) /* Forced interrupt */ +#define IRQ_TIMEOUT BIT(7) /* Bus timeout */ +#define REG_ACTL 4 /* W: Adapter Control 1 */ +#define ACTL_RESET BIT(0) /* Reset FIFO, parity, reset int. */ +#define ACTL_FIRQ BIT(1) /* Set Forced interrupt */ +#define ACTL_ARB BIT(2) /* Initiate Bus Arbitration */ +#define ACTL_PAREN BIT(3) /* Enable SCSI Parity */ +#define ACTL_IRQEN BIT(4) /* Enable interrupts */ +#define ACTL_CLRFIRQ BIT(5) /* Clear Forced interrupt */ +#define ACTL_FIFOWR BIT(6) /* FIFO Direction (1=write) */ +#define ACTL_FIFOEN BIT(7) /* Enable FIFO */ +#define REG_ID_LSB 5 /* R: ID Code (LSB) */ +#define REG_ACTL2 5 /* Adapter Control 2 - (@) */ +#define ACTL2_RAMOVRLY BIT(0) /* Enable RAM overlay */ +#define ACTL2_SLEEP BIT(7) /* Sleep mode */ +#define REG_ID_MSB 6 /* R: ID Code (MSB) */ +#define REG_LOOPBACK 7 /* R/W: Loopback */ +#define REG_SCSI_DATA_NOACK 8 /* R/W: SCSI Data (no ACK) */ +#define REG_ASTAT3 9 /* R: Adapter Status 3 */ +#define ASTAT3_ACTDEASS BIT(0) /* Active deassert enabled */ +#define ASTAT3_RAMOVRLY BIT(1) /* RAM overlay enabled */ +#define ASTAT3_TARGERR BIT(2) /* Target error */ +#define ASTAT3_IRQEN BIT(3) /* Interrupts enabled */ +#define ASTAT3_IRQMASK 0xf0 /* Enabled interrupts mask */ +#define REG_CFG1 10 /* R: Configuration Register 1 */ +#define CFG1_BUS BIT(0) /* 0 = ISA */ +#define CFG1_IRQ_MASK 0x0e /* IRQ jumpers */ +#define CFG1_IO_MASK 0x30 /* I/O base jumpers */ +#define CFG1_BIOS_MASK 0xc0 /* BIOS base jumpers */ +#define REG_CFG2 11 /* R/W: Configuration Register 2 (@) */ +#define CFG2_ROMDIS BIT(0) /* ROM disabled */ +#define CFG2_RAMDIS BIT(1) /* RAM disabled */ +#define CFG2_IRQEDGE BIT(2) /* Edge-triggered interrupts */ +#define CFG2_NOWS BIT(3) /* No wait states */ +#define CFG2_32BIT BIT(7) /* 32-bit mode */ +#define REG_FIFO 12 /* R/W: FIFO */ +#define REG_FIFO_COUNT 14 /* R: FIFO Data Count */ + +#ifdef CONFIG_PM_SLEEP +static const struct dev_pm_ops __maybe_unused fdomain_pm_ops; +#define FDOMAIN_PM_OPS (&fdomain_pm_ops) +#else +#define FDOMAIN_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +struct Scsi_Host *fdomain_create(int base, int irq, int this_id, + struct device *dev); +int fdomain_destroy(struct Scsi_Host *sh); -- cgit v1.2.3