From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/hptiop.h | 374 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 374 insertions(+) create mode 100644 drivers/scsi/hptiop.h (limited to 'drivers/scsi/hptiop.h') diff --git a/drivers/scsi/hptiop.h b/drivers/scsi/hptiop.h new file mode 100644 index 000000000..394ef6aa4 --- /dev/null +++ b/drivers/scsi/hptiop.h @@ -0,0 +1,374 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * HighPoint RR3xxx/4xxx controller driver for Linux + * Copyright (C) 2006-2015 HighPoint Technologies, Inc. All Rights Reserved. + * + * Please report bugs/comments/suggestions to linux@highpoint-tech.com + * + * For more information, visit http://www.highpoint-tech.com + */ +#ifndef _HPTIOP_H_ +#define _HPTIOP_H_ + +struct hpt_iopmu_itl { + __le32 resrved0[4]; + __le32 inbound_msgaddr0; + __le32 inbound_msgaddr1; + __le32 outbound_msgaddr0; + __le32 outbound_msgaddr1; + __le32 inbound_doorbell; + __le32 inbound_intstatus; + __le32 inbound_intmask; + __le32 outbound_doorbell; + __le32 outbound_intstatus; + __le32 outbound_intmask; + __le32 reserved1[2]; + __le32 inbound_queue; + __le32 outbound_queue; +}; + +#define IOPMU_QUEUE_EMPTY 0xffffffff +#define IOPMU_QUEUE_MASK_HOST_BITS 0xf0000000 +#define IOPMU_QUEUE_ADDR_HOST_BIT 0x80000000 +#define IOPMU_QUEUE_REQUEST_SIZE_BIT 0x40000000 +#define IOPMU_QUEUE_REQUEST_RESULT_BIT 0x40000000 + +#define IOPMU_OUTBOUND_INT_MSG0 1 +#define IOPMU_OUTBOUND_INT_MSG1 2 +#define IOPMU_OUTBOUND_INT_DOORBELL 4 +#define IOPMU_OUTBOUND_INT_POSTQUEUE 8 +#define IOPMU_OUTBOUND_INT_PCI 0x10 + +#define IOPMU_INBOUND_INT_MSG0 1 +#define IOPMU_INBOUND_INT_MSG1 2 +#define IOPMU_INBOUND_INT_DOORBELL 4 +#define IOPMU_INBOUND_INT_ERROR 8 +#define IOPMU_INBOUND_INT_POSTQUEUE 0x10 + +#define MVIOP_QUEUE_LEN 512 + +struct hpt_iopmu_mv { + __le32 inbound_head; + __le32 inbound_tail; + __le32 outbound_head; + __le32 outbound_tail; + __le32 inbound_msg; + __le32 outbound_msg; + __le32 reserve[10]; + __le64 inbound_q[MVIOP_QUEUE_LEN]; + __le64 outbound_q[MVIOP_QUEUE_LEN]; +}; + +struct hpt_iopmv_regs { + __le32 reserved[0x20400 / 4]; + __le32 inbound_doorbell; + __le32 inbound_intmask; + __le32 outbound_doorbell; + __le32 outbound_intmask; +}; + +#pragma pack(1) +struct hpt_iopmu_mvfrey { + __le32 reserved0[(0x4000 - 0) / 4]; + __le32 inbound_base; + __le32 inbound_base_high; + __le32 reserved1[(0x4018 - 0x4008) / 4]; + __le32 inbound_write_ptr; + __le32 reserved2[(0x402c - 0x401c) / 4]; + __le32 inbound_conf_ctl; + __le32 reserved3[(0x4050 - 0x4030) / 4]; + __le32 outbound_base; + __le32 outbound_base_high; + __le32 outbound_shadow_base; + __le32 outbound_shadow_base_high; + __le32 reserved4[(0x4088 - 0x4060) / 4]; + __le32 isr_cause; + __le32 isr_enable; + __le32 reserved5[(0x1020c - 0x4090) / 4]; + __le32 pcie_f0_int_enable; + __le32 reserved6[(0x10400 - 0x10210) / 4]; + __le32 f0_to_cpu_msg_a; + __le32 reserved7[(0x10420 - 0x10404) / 4]; + __le32 cpu_to_f0_msg_a; + __le32 reserved8[(0x10480 - 0x10424) / 4]; + __le32 f0_doorbell; + __le32 f0_doorbell_enable; +}; + +struct mvfrey_inlist_entry { + dma_addr_t addr; + __le32 intrfc_len; + __le32 reserved; +}; + +struct mvfrey_outlist_entry { + __le32 val; +}; +#pragma pack() + +#define MVIOP_MU_QUEUE_ADDR_HOST_MASK (~(0x1full)) +#define MVIOP_MU_QUEUE_ADDR_HOST_BIT 4 + +#define MVIOP_MU_QUEUE_ADDR_IOP_HIGH32 0xffffffff +#define MVIOP_MU_QUEUE_REQUEST_RESULT_BIT 1 +#define MVIOP_MU_QUEUE_REQUEST_RETURN_CONTEXT 2 + +#define MVIOP_MU_INBOUND_INT_MSG 1 +#define MVIOP_MU_INBOUND_INT_POSTQUEUE 2 +#define MVIOP_MU_OUTBOUND_INT_MSG 1 +#define MVIOP_MU_OUTBOUND_INT_POSTQUEUE 2 + +#define CL_POINTER_TOGGLE 0x00004000 +#define CPU_TO_F0_DRBL_MSG_BIT 0x02000000 + +enum hpt_iopmu_message { + /* host-to-iop messages */ + IOPMU_INBOUND_MSG0_NOP = 0, + IOPMU_INBOUND_MSG0_RESET, + IOPMU_INBOUND_MSG0_FLUSH, + IOPMU_INBOUND_MSG0_SHUTDOWN, + IOPMU_INBOUND_MSG0_STOP_BACKGROUND_TASK, + IOPMU_INBOUND_MSG0_START_BACKGROUND_TASK, + IOPMU_INBOUND_MSG0_RESET_COMM, + IOPMU_INBOUND_MSG0_MAX = 0xff, + /* iop-to-host messages */ + IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_0 = 0x100, + IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_MAX = 0x1ff, + IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_0 = 0x200, + IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_MAX = 0x2ff, + IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_0 = 0x300, + IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_MAX = 0x3ff, +}; + +struct hpt_iop_request_header { + __le32 size; + __le32 type; + __le32 flags; + __le32 result; + __le32 context; /* host context */ + __le32 context_hi32; +}; + +#define IOP_REQUEST_FLAG_SYNC_REQUEST 1 +#define IOP_REQUEST_FLAG_BIST_REQUEST 2 +#define IOP_REQUEST_FLAG_REMAPPED 4 +#define IOP_REQUEST_FLAG_OUTPUT_CONTEXT 8 +#define IOP_REQUEST_FLAG_ADDR_BITS 0x40 /* flags[31:16] is phy_addr[47:32] */ + +enum hpt_iop_request_type { + IOP_REQUEST_TYPE_GET_CONFIG = 0, + IOP_REQUEST_TYPE_SET_CONFIG, + IOP_REQUEST_TYPE_BLOCK_COMMAND, + IOP_REQUEST_TYPE_SCSI_COMMAND, + IOP_REQUEST_TYPE_IOCTL_COMMAND, + IOP_REQUEST_TYPE_MAX +}; + +enum hpt_iop_result_type { + IOP_RESULT_PENDING = 0, + IOP_RESULT_SUCCESS, + IOP_RESULT_FAIL, + IOP_RESULT_BUSY, + IOP_RESULT_RESET, + IOP_RESULT_INVALID_REQUEST, + IOP_RESULT_BAD_TARGET, + IOP_RESULT_CHECK_CONDITION, +}; + +struct hpt_iop_request_get_config { + struct hpt_iop_request_header header; + __le32 interface_version; + __le32 firmware_version; + __le32 max_requests; + __le32 request_size; + __le32 max_sg_count; + __le32 data_transfer_length; + __le32 alignment_mask; + __le32 max_devices; + __le32 sdram_size; +}; + +struct hpt_iop_request_set_config { + struct hpt_iop_request_header header; + __le32 iop_id; + __le16 vbus_id; + __le16 max_host_request_size; + __le32 reserve[6]; +}; + +struct hpt_iopsg { + __le32 size; + __le32 eot; /* non-zero: end of table */ + __le64 pci_address; +}; + +struct hpt_iop_request_block_command { + struct hpt_iop_request_header header; + u8 channel; + u8 target; + u8 lun; + u8 pad1; + __le16 command; /* IOP_BLOCK_COMMAND_{READ,WRITE} */ + __le16 sectors; + __le64 lba; + struct hpt_iopsg sg_list[1]; +}; + +#define IOP_BLOCK_COMMAND_READ 1 +#define IOP_BLOCK_COMMAND_WRITE 2 +#define IOP_BLOCK_COMMAND_VERIFY 3 +#define IOP_BLOCK_COMMAND_FLUSH 4 +#define IOP_BLOCK_COMMAND_SHUTDOWN 5 + +struct hpt_iop_request_scsi_command { + struct hpt_iop_request_header header; + u8 channel; + u8 target; + u8 lun; + u8 pad1; + u8 cdb[16]; + __le32 dataxfer_length; + struct hpt_iopsg sg_list[]; +}; + +struct hpt_iop_request_ioctl_command { + struct hpt_iop_request_header header; + __le32 ioctl_code; + __le32 inbuf_size; + __le32 outbuf_size; + __le32 bytes_returned; + u8 buf[]; + /* out data should be put at buf[(inbuf_size+3)&~3] */ +}; + +#define HPTIOP_MAX_REQUESTS 256u + +struct hptiop_request { + struct hptiop_request *next; + void *req_virt; + u32 req_shifted_phy; + struct scsi_cmnd *scp; + int index; +}; + +struct hpt_cmd_priv { + int mapped; + int sgcnt; + dma_addr_t dma_handle; +}; + +#define HPT_SCP(scp) ((struct hpt_cmd_priv *)scsi_cmd_priv(scp)) + +enum hptiop_family { + UNKNOWN_BASED_IOP, + INTEL_BASED_IOP, + MV_BASED_IOP, + MVFREY_BASED_IOP +} ; + +struct hptiop_hba { + struct hptiop_adapter_ops *ops; + union { + struct { + struct hpt_iopmu_itl __iomem *iop; + void __iomem *plx; + } itl; + struct { + struct hpt_iopmv_regs *regs; + struct hpt_iopmu_mv __iomem *mu; + void *internal_req; + dma_addr_t internal_req_phy; + } mv; + struct { + struct hpt_iop_request_get_config __iomem *config; + struct hpt_iopmu_mvfrey __iomem *mu; + + int internal_mem_size; + struct hptiop_request internal_req; + int list_count; + struct mvfrey_inlist_entry *inlist; + dma_addr_t inlist_phy; + __le32 inlist_wptr; + struct mvfrey_outlist_entry *outlist; + dma_addr_t outlist_phy; + __le32 *outlist_cptr; /* copy pointer shadow */ + dma_addr_t outlist_cptr_phy; + __le32 outlist_rptr; + } mvfrey; + } u; + + struct Scsi_Host *host; + struct pci_dev *pcidev; + + /* IOP config info */ + u32 interface_version; + u32 firmware_version; + u32 sdram_size; + u32 max_devices; + u32 max_requests; + u32 max_request_size; + u32 max_sg_descriptors; + + u32 req_size; /* host-allocated request buffer size */ + + u32 iopintf_v2: 1; + u32 initialized: 1; + u32 msg_done: 1; + + struct hptiop_request * req_list; + struct hptiop_request reqs[HPTIOP_MAX_REQUESTS]; + + /* used to free allocated dma area */ + void *dma_coherent[HPTIOP_MAX_REQUESTS]; + dma_addr_t dma_coherent_handle[HPTIOP_MAX_REQUESTS]; + + atomic_t reset_count; + atomic_t resetting; + + wait_queue_head_t reset_wq; + wait_queue_head_t ioctl_wq; +}; + +struct hpt_ioctl_k { + struct hptiop_hba * hba; + u32 ioctl_code; + u32 inbuf_size; + u32 outbuf_size; + void *inbuf; + void *outbuf; + u32 *bytes_returned; + void (*done)(struct hpt_ioctl_k *); + int result; /* HPT_IOCTL_RESULT_ */ +}; + +struct hptiop_adapter_ops { + enum hptiop_family family; + int (*iop_wait_ready)(struct hptiop_hba *hba, u32 millisec); + int (*internal_memalloc)(struct hptiop_hba *hba); + int (*internal_memfree)(struct hptiop_hba *hba); + int (*map_pci_bar)(struct hptiop_hba *hba); + void (*unmap_pci_bar)(struct hptiop_hba *hba); + void (*enable_intr)(struct hptiop_hba *hba); + void (*disable_intr)(struct hptiop_hba *hba); + int (*get_config)(struct hptiop_hba *hba, + struct hpt_iop_request_get_config *config); + int (*set_config)(struct hptiop_hba *hba, + struct hpt_iop_request_set_config *config); + int (*iop_intr)(struct hptiop_hba *hba); + void (*post_msg)(struct hptiop_hba *hba, u32 msg); + void (*post_req)(struct hptiop_hba *hba, struct hptiop_request *_req); + int hw_dma_bit_mask; + int (*reset_comm)(struct hptiop_hba *hba); + __le64 host_phy_flag; +}; + +#define HPT_IOCTL_RESULT_OK 0 +#define HPT_IOCTL_RESULT_FAILED (-1) + +#if 0 +#define dprintk(fmt, args...) do { printk(fmt, ##args); } while(0) +#else +#define dprintk(fmt, args...) +#endif + +#endif -- cgit v1.2.3