From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/libfc/fc_npiv.c | 147 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 drivers/scsi/libfc/fc_npiv.c (limited to 'drivers/scsi/libfc/fc_npiv.c') diff --git a/drivers/scsi/libfc/fc_npiv.c b/drivers/scsi/libfc/fc_npiv.c new file mode 100644 index 000000000..c045898b8 --- /dev/null +++ b/drivers/scsi/libfc/fc_npiv.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright(c) 2009 Intel Corporation. All rights reserved. + * + * Maintained at www.Open-FCoE.org + */ + +/* + * NPIV VN_Port helper functions for libfc + */ + +#include +#include + +/** + * libfc_vport_create() - Create a new NPIV vport instance + * @vport: fc_vport structure from scsi_transport_fc + * @privsize: driver private data size to allocate along with the Scsi_Host + */ + +struct fc_lport *libfc_vport_create(struct fc_vport *vport, int privsize) +{ + struct Scsi_Host *shost = vport_to_shost(vport); + struct fc_lport *n_port = shost_priv(shost); + struct fc_lport *vn_port; + + vn_port = libfc_host_alloc(shost->hostt, privsize); + if (!vn_port) + return vn_port; + + vn_port->vport = vport; + vport->dd_data = vn_port; + + mutex_lock(&n_port->lp_mutex); + list_add_tail(&vn_port->list, &n_port->vports); + mutex_unlock(&n_port->lp_mutex); + + return vn_port; +} +EXPORT_SYMBOL(libfc_vport_create); + +/** + * fc_vport_id_lookup() - find NPIV lport that matches a given fabric ID + * @n_port: Top level N_Port which may have multiple NPIV VN_Ports + * @port_id: Fabric ID to find a match for + * + * Returns: matching lport pointer or NULL if there is no match + */ +struct fc_lport *fc_vport_id_lookup(struct fc_lport *n_port, u32 port_id) +{ + struct fc_lport *lport = NULL; + struct fc_lport *vn_port; + + if (n_port->port_id == port_id) + return n_port; + + if (port_id == FC_FID_FLOGI) + return n_port; /* for point-to-point */ + + mutex_lock(&n_port->lp_mutex); + list_for_each_entry(vn_port, &n_port->vports, list) { + if (vn_port->port_id == port_id) { + lport = vn_port; + break; + } + } + mutex_unlock(&n_port->lp_mutex); + + return lport; +} +EXPORT_SYMBOL(fc_vport_id_lookup); + +/* + * When setting the link state of vports during an lport state change, it's + * necessary to hold the lp_mutex of both the N_Port and the VN_Port. + * This tells the lockdep engine to treat the nested locking of the VN_Port + * as a different lock class. + */ +enum libfc_lport_mutex_class { + LPORT_MUTEX_NORMAL = 0, + LPORT_MUTEX_VN_PORT = 1, +}; + +/** + * __fc_vport_setlink() - update link and status on a VN_Port + * @n_port: parent N_Port + * @vn_port: VN_Port to update + * + * Locking: must be called with both the N_Port and VN_Port lp_mutex held + */ +static void __fc_vport_setlink(struct fc_lport *n_port, + struct fc_lport *vn_port) +{ + struct fc_vport *vport = vn_port->vport; + + if (vn_port->state == LPORT_ST_DISABLED) + return; + + if (n_port->state == LPORT_ST_READY) { + if (n_port->npiv_enabled) { + fc_vport_set_state(vport, FC_VPORT_INITIALIZING); + __fc_linkup(vn_port); + } else { + fc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); + __fc_linkdown(vn_port); + } + } else { + fc_vport_set_state(vport, FC_VPORT_LINKDOWN); + __fc_linkdown(vn_port); + } +} + +/** + * fc_vport_setlink() - update link and status on a VN_Port + * @vn_port: virtual port to update + */ +void fc_vport_setlink(struct fc_lport *vn_port) +{ + struct fc_vport *vport = vn_port->vport; + struct Scsi_Host *shost = vport_to_shost(vport); + struct fc_lport *n_port = shost_priv(shost); + + mutex_lock(&n_port->lp_mutex); + mutex_lock_nested(&vn_port->lp_mutex, LPORT_MUTEX_VN_PORT); + __fc_vport_setlink(n_port, vn_port); + mutex_unlock(&vn_port->lp_mutex); + mutex_unlock(&n_port->lp_mutex); +} +EXPORT_SYMBOL(fc_vport_setlink); + +/** + * fc_vports_linkchange() - change the link state of all vports + * @n_port: Parent N_Port that has changed state + * + * Locking: called with the n_port lp_mutex held + */ +void fc_vports_linkchange(struct fc_lport *n_port) +{ + struct fc_lport *vn_port; + + list_for_each_entry(vn_port, &n_port->vports, list) { + mutex_lock_nested(&vn_port->lp_mutex, LPORT_MUTEX_VN_PORT); + __fc_vport_setlink(n_port, vn_port); + mutex_unlock(&vn_port->lp_mutex); + } +} + -- cgit v1.2.3