From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/lpfc/lpfc_bsg.h | 387 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 387 insertions(+) create mode 100644 drivers/scsi/lpfc/lpfc_bsg.h (limited to 'drivers/scsi/lpfc/lpfc_bsg.h') diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h new file mode 100644 index 000000000..3c04ca2d7 --- /dev/null +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -0,0 +1,387 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term * + * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * + * Copyright (C) 2010-2015 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.broadcom.com * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ +/* bsg definitions + * No pointers to user data are allowed, all application buffers and sizes will + * derived through the bsg interface. + * + * These are the vendor unique structures passed in using the bsg + * FC_BSG_HST_VENDOR message code type. + */ +#define LPFC_BSG_VENDOR_SET_CT_EVENT 1 +#define LPFC_BSG_VENDOR_GET_CT_EVENT 2 +#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 +#define LPFC_BSG_VENDOR_DIAG_MODE 4 +#define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5 +#define LPFC_BSG_VENDOR_GET_MGMT_REV 6 +#define LPFC_BSG_VENDOR_MBOX 7 +#define LPFC_BSG_VENDOR_DIAG_MODE_END 10 +#define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 +#define LPFC_BSG_VENDOR_FORCED_LINK_SPEED 14 +#define LPFC_BSG_VENDOR_RAS_GET_LWPD 16 +#define LPFC_BSG_VENDOR_RAS_GET_FWLOG 17 +#define LPFC_BSG_VENDOR_RAS_GET_CONFIG 18 +#define LPFC_BSG_VENDOR_RAS_SET_CONFIG 19 +#define LPFC_BSG_VENDOR_GET_TRUNK_INFO 20 +#define LPFC_BSG_VENDOR_GET_CGNBUF_INFO 21 + +struct set_ct_event { + uint32_t command; + uint32_t type_mask; + uint32_t ev_req_id; + uint32_t ev_reg_id; +}; + +struct get_ct_event { + uint32_t command; + uint32_t ev_reg_id; + uint32_t ev_req_id; +}; + +struct get_ct_event_reply { + uint32_t immed_data; + uint32_t type; +}; + +struct send_mgmt_resp { + uint32_t command; + uint32_t tag; +}; + + +#define DISABLE_LOOP_BACK 0x0 /* disables loop back */ +#define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */ +#define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */ + +struct diag_mode_set { + uint32_t command; + uint32_t type; + uint32_t timeout; + uint32_t physical_link; +}; + +struct sli4_link_diag { + uint32_t command; + uint32_t timeout; + uint32_t test_id; + uint32_t loops; + uint32_t test_version; + uint32_t error_action; +}; + +struct diag_mode_test { + uint32_t command; +}; + +struct diag_status { + uint32_t mbox_status; + uint32_t shdr_status; + uint32_t shdr_add_status; +}; + +#define LPFC_WWNN_TYPE 0 +#define LPFC_WWPN_TYPE 1 + +struct get_mgmt_rev { + uint32_t command; +}; + +#define MANAGEMENT_MAJOR_REV 1 +#define MANAGEMENT_MINOR_REV 1 + +/* the MgmtRevInfo structure */ +struct MgmtRevInfo { + uint32_t a_Major; + uint32_t a_Minor; +}; + +struct get_mgmt_rev_reply { + struct MgmtRevInfo info; +}; + +#define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */ + +/* BSG mailbox request header */ +struct dfc_mbox_req { + uint32_t command; + uint32_t mbOffset; + uint32_t inExtWLen; + uint32_t outExtWLen; + uint32_t extMboxTag; + uint32_t extSeqNum; +}; + +/* + * macros and data structures for handling sli-config mailbox command + * pass-through support, this header file is shared between user and + * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h, + * with macro names prefixed with bsg_, as the macros defined in + * lpfc_hw4.h are not accessible from user space. + */ + +/* Macros to deal with bit fields. Each bit field must have 3 #defines + * associated with it (_SHIFT, _MASK, and _WORD). + * EG. For a bit field that is in the 7th bit of the "field4" field of a + * structure and is 2 bits in size the following #defines must exist: + * struct temp { + * uint32_t field1; + * uint32_t field2; + * uint32_t field3; + * uint32_t field4; + * #define example_bit_field_SHIFT 7 + * #define example_bit_field_MASK 0x03 + * #define example_bit_field_WORD field4 + * uint32_t field5; + * }; + * Then the macros below may be used to get or set the value of that field. + * EG. To get the value of the bit field from the above example: + * struct temp t1; + * value = bsg_bf_get(example_bit_field, &t1); + * And then to set that bit field: + * bsg_bf_set(example_bit_field, &t1, 2); + * Or clear that bit field: + * bsg_bf_set(example_bit_field, &t1, 0); + */ +#define bsg_bf_get_le32(name, ptr) \ + ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK) +#define bsg_bf_get(name, ptr) \ + (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK) +#define bsg_bf_set_le32(name, ptr, value) \ + ((ptr)->name##_WORD = cpu_to_le32(((((value) & \ + name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \ + ~(name##_MASK << name##_SHIFT))))) +#define bsg_bf_set(name, ptr, value) \ + ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \ + ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT)))) + +/* + * The sli_config structure specified here is based on the following + * restriction: + * + * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without + * carrying HBD. + * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or + * without carrying HBDs. + */ + +struct lpfc_sli_config_mse { + uint32_t pa_lo; + uint32_t pa_hi; + uint32_t buf_len; +#define lpfc_mbox_sli_config_mse_len_SHIFT 0 +#define lpfc_mbox_sli_config_mse_len_MASK 0xffffff +#define lpfc_mbox_sli_config_mse_len_WORD buf_len +}; + +struct lpfc_sli_config_hbd { + uint32_t buf_len; +#define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0 +#define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff +#define lpfc_mbox_sli_config_ecmn_hbd_len_WORD buf_len + uint32_t pa_lo; + uint32_t pa_hi; +}; + +struct lpfc_sli_config_hdr { + uint32_t word1; +#define lpfc_mbox_hdr_emb_SHIFT 0 +#define lpfc_mbox_hdr_emb_MASK 0x00000001 +#define lpfc_mbox_hdr_emb_WORD word1 +#define lpfc_mbox_hdr_mse_cnt_SHIFT 3 +#define lpfc_mbox_hdr_mse_cnt_MASK 0x0000001f +#define lpfc_mbox_hdr_mse_cnt_WORD word1 + uint32_t payload_length; + uint32_t tag_lo; + uint32_t tag_hi; + uint32_t reserved5; +}; + +#define LPFC_CSF_BOOT_DEV 0x1D +#define LPFC_CSF_QUERY 0 +#define LPFC_CSF_SAVE 1 + +struct lpfc_sli_config_emb0_subsys { + struct lpfc_sli_config_hdr sli_config_hdr; +#define LPFC_MBX_SLI_CONFIG_MAX_MSE 19 + struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE]; + uint32_t padding; + uint32_t word64; +#define lpfc_emb0_subcmnd_opcode_SHIFT 0 +#define lpfc_emb0_subcmnd_opcode_MASK 0xff +#define lpfc_emb0_subcmnd_opcode_WORD word64 +#define lpfc_emb0_subcmnd_subsys_SHIFT 8 +#define lpfc_emb0_subcmnd_subsys_MASK 0xff +#define lpfc_emb0_subcmnd_subsys_WORD word64 +/* Subsystem FCOE (0x0C) OpCodes */ +#define SLI_CONFIG_SUBSYS_FCOE 0x0C +#define FCOE_OPCODE_READ_FCF 0x08 +#define FCOE_OPCODE_ADD_FCF 0x09 +#define FCOE_OPCODE_SET_DPORT_MODE 0x27 +#define FCOE_OPCODE_GET_DPORT_RESULTS 0x28 + uint32_t timeout; /* comn_set_feature timeout */ + uint32_t request_length; /* comn_set_feature request len */ + uint32_t version; /* comn_set_feature version */ + uint32_t csf_feature; /* comn_set_feature feature */ + uint32_t word69; /* comn_set_feature parameter len */ + uint32_t word70; /* comn_set_feature parameter val0 */ +#define lpfc_emb0_subcmnd_csf_p0_SHIFT 0 +#define lpfc_emb0_subcmnd_csf_p0_MASK 0x3 +#define lpfc_emb0_subcmnd_csf_p0_WORD word70 +}; + +struct lpfc_sli_config_emb1_subsys { + struct lpfc_sli_config_hdr sli_config_hdr; + uint32_t word6; +#define lpfc_emb1_subcmnd_opcode_SHIFT 0 +#define lpfc_emb1_subcmnd_opcode_MASK 0xff +#define lpfc_emb1_subcmnd_opcode_WORD word6 +#define lpfc_emb1_subcmnd_subsys_SHIFT 8 +#define lpfc_emb1_subcmnd_subsys_MASK 0xff +#define lpfc_emb1_subcmnd_subsys_WORD word6 +/* Subsystem COMN (0x01) OpCodes */ +#define SLI_CONFIG_SUBSYS_COMN 0x01 +#define COMN_OPCODE_GET_PROFILE_CONFIG 0xA4 +#define COMN_OPCODE_READ_OBJECT 0xAB +#define COMN_OPCODE_WRITE_OBJECT 0xAC +#define COMN_OPCODE_READ_OBJECT_LIST 0xAD +#define COMN_OPCODE_DELETE_OBJECT 0xAE +#define COMN_OPCODE_SET_FEATURES 0xBF +#define COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES 0x79 +#define COMN_OPCODE_GET_CNTL_ATTRIBUTES 0x20 + uint32_t timeout; + uint32_t request_length; + uint32_t word9; +#define lpfc_subcmnd_version_SHIFT 0 +#define lpfc_subcmnd_version_MASK 0xff +#define lpfc_subcmnd_version_WORD word9 + uint32_t word10; +#define lpfc_subcmnd_ask_rd_len_SHIFT 0 +#define lpfc_subcmnd_ask_rd_len_MASK 0xffffff +#define lpfc_subcmnd_ask_rd_len_WORD word10 + uint32_t rd_offset; + uint32_t obj_name[26]; + uint32_t hbd_count; +#define LPFC_MBX_SLI_CONFIG_MAX_HBD 8 + struct lpfc_sli_config_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; +}; + +struct lpfc_sli_config_mbox { + uint32_t word0; +#define lpfc_mqe_status_SHIFT 16 +#define lpfc_mqe_status_MASK 0x0000FFFF +#define lpfc_mqe_status_WORD word0 +#define lpfc_mqe_command_SHIFT 8 +#define lpfc_mqe_command_MASK 0x000000FF +#define lpfc_mqe_command_WORD word0 + union { + struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys; + struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys; + } un; +}; + +#define LPFC_FORCED_LINK_SPEED_NOT_SUPPORTED 0 +#define LPFC_FORCED_LINK_SPEED_SUPPORTED 1 +struct get_forced_link_speed_support { + uint32_t command; +}; +struct forced_link_speed_support_reply { + uint8_t supported; +}; + +struct lpfc_bsg_ras_req { + uint32_t command; +}; + +struct lpfc_bsg_get_fwlog_req { + uint32_t command; + uint32_t read_size; + uint32_t read_offset; +}; + +struct lpfc_bsg_get_ras_lwpd { + uint32_t offset; + uint32_t wrap_count; +}; + +struct lpfc_bsg_set_ras_config_req { + uint32_t command; + uint8_t action; +#define LPFC_RASACTION_STOP_LOGGING 0x00 +#define LPFC_RASACTION_START_LOGGING 0x01 + uint8_t log_level; +}; + +struct lpfc_bsg_get_ras_config_reply { + uint8_t state; +#define LPFC_RASLOG_STATE_STOPPED 0x00 +#define LPFC_RASLOG_STATE_RUNNING 0x01 + uint8_t log_level; + uint32_t log_buff_sz; +}; + +struct lpfc_trunk_info { + uint32_t word0; +#define lpfc_trunk_info_link_status_SHIFT 0 +#define lpfc_trunk_info_link_status_MASK 1 +#define lpfc_trunk_info_link_status_WORD word0 +#define lpfc_trunk_info_trunk_active0_SHIFT 8 +#define lpfc_trunk_info_trunk_active0_MASK 1 +#define lpfc_trunk_info_trunk_active0_WORD word0 +#define lpfc_trunk_info_trunk_active1_SHIFT 9 +#define lpfc_trunk_info_trunk_active1_MASK 1 +#define lpfc_trunk_info_trunk_active1_WORD word0 +#define lpfc_trunk_info_trunk_active2_SHIFT 10 +#define lpfc_trunk_info_trunk_active2_MASK 1 +#define lpfc_trunk_info_trunk_active2_WORD word0 +#define lpfc_trunk_info_trunk_active3_SHIFT 11 +#define lpfc_trunk_info_trunk_active3_MASK 1 +#define lpfc_trunk_info_trunk_active3_WORD word0 +#define lpfc_trunk_info_trunk_config0_SHIFT 12 +#define lpfc_trunk_info_trunk_config0_MASK 1 +#define lpfc_trunk_info_trunk_config0_WORD word0 +#define lpfc_trunk_info_trunk_config1_SHIFT 13 +#define lpfc_trunk_info_trunk_config1_MASK 1 +#define lpfc_trunk_info_trunk_config1_WORD word0 +#define lpfc_trunk_info_trunk_config2_SHIFT 14 +#define lpfc_trunk_info_trunk_config2_MASK 1 +#define lpfc_trunk_info_trunk_config2_WORD word0 +#define lpfc_trunk_info_trunk_config3_SHIFT 15 +#define lpfc_trunk_info_trunk_config3_MASK 1 +#define lpfc_trunk_info_trunk_config3_WORD word0 + uint16_t port_speed; + uint16_t logical_speed; + uint32_t reserved3; +}; + +struct get_trunk_info_req { + uint32_t command; +}; + +struct get_cgnbuf_info_req { + uint32_t command; + uint32_t read_size; + uint32_t reset; +#define LPFC_BSG_CGN_RESET_STAT 1 +}; + +/* driver only */ +#define SLI_CONFIG_NOT_HANDLED 0 +#define SLI_CONFIG_HANDLED 1 -- cgit v1.2.3