From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/lpfc/lpfc_disc.h | 293 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 293 insertions(+) create mode 100644 drivers/scsi/lpfc/lpfc_disc.h (limited to 'drivers/scsi/lpfc/lpfc_disc.h') diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h new file mode 100644 index 000000000..f82615d87 --- /dev/null +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -0,0 +1,293 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term * + * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * + * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.broadcom.com * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ + +#define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */ +#define FC_MAX_NS_RSP 64512 /* max size NameServer rsp */ +#define FC_MAXLOOP 126 /* max devices supported on a fc loop */ +#define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */ + + +/* This is the protocol dependent definition for a Node List Entry. + * This is used by Fibre Channel protocol to support FCP. + */ + +/* worker thread events */ +enum lpfc_work_type { + LPFC_EVT_ONLINE, + LPFC_EVT_OFFLINE_PREP, + LPFC_EVT_OFFLINE, + LPFC_EVT_WARM_START, + LPFC_EVT_KILL, + LPFC_EVT_ELS_RETRY, + LPFC_EVT_DEV_LOSS, + LPFC_EVT_FASTPATH_MGMT_EVT, + LPFC_EVT_RESET_HBA, + LPFC_EVT_RECOVER_PORT +}; + +/* structure used to queue event to the discovery tasklet */ +struct lpfc_work_evt { + struct list_head evt_listp; + void *evt_arg1; + void *evt_arg2; + enum lpfc_work_type evt; +}; + +struct lpfc_scsi_check_condition_event; +struct lpfc_scsi_varqueuedepth_event; +struct lpfc_scsi_event_header; +struct lpfc_fabric_event_header; +struct lpfc_fcprdchkerr_event; + +/* structure used for sending events from fast path */ +struct lpfc_fast_path_event { + struct lpfc_work_evt work_evt; + struct lpfc_vport *vport; + union { + struct lpfc_scsi_check_condition_event check_cond_evt; + struct lpfc_scsi_varqueuedepth_event queue_depth_evt; + struct lpfc_scsi_event_header scsi_evt; + struct lpfc_fabric_event_header fabric_evt; + struct lpfc_fcprdchkerr_event read_check_error; + } un; +}; + +#define LPFC_SLI4_MAX_XRI 1024 /* Used to make the ndlp's xri_bitmap */ +#define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG) +struct lpfc_node_rrqs { + unsigned long xri_bitmap[XRI_BITMAP_ULONGS]; +}; + +enum lpfc_fc4_xpt_flags { + NLP_XPT_REGD = 0x1, + SCSI_XPT_REGD = 0x2, + NVME_XPT_REGD = 0x4, + NVME_XPT_UNREG_WAIT = 0x8, + NLP_XPT_HAS_HH = 0x10 +}; + +enum lpfc_nlp_save_flags { + /* devloss occurred during recovery */ + NLP_IN_RECOV_POST_DEV_LOSS = 0x1, + /* wait for outstanding LOGO to cmpl */ + NLP_WAIT_FOR_LOGO = 0x2, +}; + +struct lpfc_nodelist { + struct list_head nlp_listp; + struct serv_parm fc_sparam; /* buffer for service params */ + struct lpfc_name nlp_portname; + struct lpfc_name nlp_nodename; + + spinlock_t lock; /* Node management lock */ + + uint32_t nlp_flag; /* entry flags */ + uint32_t nlp_DID; /* FC D_ID of entry */ + uint32_t nlp_last_elscmd; /* Last ELS cmd sent */ + uint16_t nlp_type; +#define NLP_FC_NODE 0x1 /* entry is an FC node */ +#define NLP_FABRIC 0x4 /* entry rep a Fabric entity */ +#define NLP_FCP_TARGET 0x8 /* entry is an FCP target */ +#define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */ +#define NLP_NVME_TARGET 0x20 /* entry is a NVME Target */ +#define NLP_NVME_INITIATOR 0x40 /* entry is a NVME Initiator */ +#define NLP_NVME_DISCOVERY 0x80 /* entry has NVME disc srvc */ + + uint16_t nlp_fc4_type; /* FC types node supports. */ + /* Assigned from GID_FF, only + * FCP (0x8) and NVME (0x28) + * supported. + */ +#define NLP_FC4_NONE 0x0 +#define NLP_FC4_FCP 0x1 /* FC4 Type FCP (value x8)) */ +#define NLP_FC4_NVME 0x2 /* FC4 TYPE NVME (value x28) */ + + uint16_t nlp_rpi; + uint16_t nlp_state; /* state transition indicator */ + uint16_t nlp_prev_state; /* state transition indicator */ + uint16_t nlp_xri; /* output exchange id for RPI */ + uint16_t nlp_sid; /* scsi id */ +#define NLP_NO_SID 0xffff + uint16_t nlp_maxframe; /* Max RCV frame size */ + uint8_t nlp_class_sup; /* Supported Classes */ + uint8_t nlp_retry; /* used for ELS retries */ + uint8_t nlp_fcp_info; /* class info, bits 0-3 */ +#define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */ + u8 nlp_nvme_info; /* NVME NSLER Support */ + uint8_t vmid_support; /* destination VMID support */ +#define NLP_NVME_NSLER 0x1 /* NVME NSLER device */ + + struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ + struct lpfc_hba *phba; + struct fc_rport *rport; /* scsi_transport_fc port structure */ + struct lpfc_nvme_rport *nrport; /* nvme transport rport struct. */ + struct lpfc_vport *vport; + struct lpfc_work_evt els_retry_evt; + struct lpfc_work_evt dev_loss_evt; + struct lpfc_work_evt recovery_evt; + struct kref kref; + atomic_t cmd_pending; + uint32_t cmd_qdepth; + unsigned long last_change_time; + unsigned long *active_rrqs_xri_bitmap; + uint32_t fc4_prli_sent; + + /* flags to keep ndlp alive until special conditions are met */ + enum lpfc_nlp_save_flags save_flags; + + enum lpfc_fc4_xpt_flags fc4_xpt_flags; + + uint32_t nvme_fb_size; /* NVME target's supported byte cnt */ +#define NVME_FB_BIT_SHIFT 9 /* PRLI Rsp first burst in 512B units. */ + uint32_t nlp_defer_did; + wait_queue_head_t *logo_waitq; +}; + +struct lpfc_node_rrq { + struct list_head list; + uint16_t xritag; + uint16_t send_rrq; + uint16_t rxid; + uint32_t nlp_DID; /* FC D_ID of entry */ + struct lpfc_vport *vport; + unsigned long rrq_stop_time; +}; + +#define lpfc_ndlp_check_qdepth(phba, ndlp) \ + (ndlp->cmd_qdepth < phba->sli4_hba.max_cfg_param.max_xri) + +/* Defines for nlp_flag (uint32) */ +#define NLP_IGNR_REG_CMPL 0x00000001 /* Rcvd rscn before we cmpl reg login */ +#define NLP_REG_LOGIN_SEND 0x00000002 /* sent reglogin to adapter */ +#define NLP_RELEASE_RPI 0x00000004 /* Release RPI to free pool */ +#define NLP_SUPPRESS_RSP 0x00000010 /* Remote NPort supports suppress rsp */ +#define NLP_PLOGI_SND 0x00000020 /* sent PLOGI request for this entry */ +#define NLP_PRLI_SND 0x00000040 /* sent PRLI request for this entry */ +#define NLP_ADISC_SND 0x00000080 /* sent ADISC request for this entry */ +#define NLP_LOGO_SND 0x00000100 /* sent LOGO request for this entry */ +#define NLP_RNID_SND 0x00000400 /* sent RNID request for this entry */ +#define NLP_ELS_SND_MASK 0x000007e0 /* sent ELS request for this entry */ +#define NLP_NVMET_RECOV 0x00001000 /* NVMET auditing node for recovery. */ +#define NLP_UNREG_INP 0x00008000 /* UNREG_RPI cmd is in progress */ +#define NLP_DROPPED 0x00010000 /* Init ref count has been dropped */ +#define NLP_DELAY_TMO 0x00020000 /* delay timeout is running for node */ +#define NLP_NPR_2B_DISC 0x00040000 /* node is included in num_disc_nodes */ +#define NLP_RCV_PLOGI 0x00080000 /* Rcv'ed PLOGI from remote system */ +#define NLP_LOGO_ACC 0x00100000 /* Process LOGO after ACC completes */ +#define NLP_TGT_NO_SCSIID 0x00200000 /* good PRLI but no binding for scsid */ +#define NLP_ISSUE_LOGO 0x00400000 /* waiting to issue a LOGO */ +#define NLP_IN_DEV_LOSS 0x00800000 /* devloss in progress */ +#define NLP_ACC_REGLOGIN 0x01000000 /* Issue Reg Login after successful + ACC */ +#define NLP_NPR_ADISC 0x02000000 /* Issue ADISC when dq'ed from + NPR list */ +#define NLP_RM_DFLT_RPI 0x04000000 /* need to remove leftover dflt RPI */ +#define NLP_NODEV_REMOVE 0x08000000 /* Defer removal till discovery ends */ +#define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */ +#define NLP_SC_REQ 0x20000000 /* Target requires authentication */ +#define NLP_FIRSTBURST 0x40000000 /* Target supports FirstBurst */ +#define NLP_RPI_REGISTERED 0x80000000 /* nlp_rpi is valid */ + +/* There are 4 different double linked lists nodelist entries can reside on. + * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used + * when Link Up discovery or Registered State Change Notification (RSCN) + * processing is needed. Each list holds the nodes that require a PLOGI or + * ADISC Extended Link Service (ELS) request. These lists keep track of the + * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected + * by Link Up) event. The unmapped_list contains all nodes that have + * successfully logged into at the Fibre Channel level. The + * mapped_list will contain all nodes that are mapped FCP targets. + * + * The bind list is a list of undiscovered (potentially non-existent) nodes + * that we have saved binding information on. This information is used when + * nodes transition from the unmapped to the mapped list. + */ + +/* Defines for nlp_state */ +#define NLP_STE_UNUSED_NODE 0x0 /* node is just allocated */ +#define NLP_STE_PLOGI_ISSUE 0x1 /* PLOGI was sent to NL_PORT */ +#define NLP_STE_ADISC_ISSUE 0x2 /* ADISC was sent to NL_PORT */ +#define NLP_STE_REG_LOGIN_ISSUE 0x3 /* REG_LOGIN was issued for NL_PORT */ +#define NLP_STE_PRLI_ISSUE 0x4 /* PRLI was sent to NL_PORT */ +#define NLP_STE_LOGO_ISSUE 0x5 /* LOGO was sent to NL_PORT */ +#define NLP_STE_UNMAPPED_NODE 0x6 /* PRLI completed from NL_PORT */ +#define NLP_STE_MAPPED_NODE 0x7 /* Identified as a FCP Target */ +#define NLP_STE_NPR_NODE 0x8 /* NPort disappeared */ +#define NLP_STE_MAX_STATE 0x9 +#define NLP_STE_FREED_NODE 0xff /* node entry was freed to MEM_NLP */ + +/* For UNUSED_NODE state, the node has just been allocated. + * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on + * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list + * and put on the unmapped list. For ADISC processing, the node is taken off + * the ADISC list and placed on either the mapped or unmapped list (depending + * on its previous state). Once on the unmapped list, a PRLI is issued and the + * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is + * changed to PRLI_COMPL. If the completion indicates a mapped + * node, the node is taken off the unmapped list. The binding list is checked + * for a valid binding, or a binding is automatically assigned. If binding + * assignment is unsuccessful, the node is left on the unmapped list. If + * binding assignment is successful, the associated binding list entry (if + * any) is removed, and the node is placed on the mapped list. + */ +/* + * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped + * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers + * expire, all effected nodes will receive a DEVICE_RM event. + */ +/* + * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists + * to either the ADISC or PLOGI list. After a Nameserver query or ALPA loopmap + * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to / + * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated, + * we will first process the ADISC list. 32 entries are processed initially and + * ADISC is initited for each one. Completions / Events for each node are + * funnelled thru the state machine. As each node finishes ADISC processing, it + * starts ADISC for any nodes waiting for ADISC processing. If no nodes are + * waiting, and the ADISC list count is identically 0, then we are done. For + * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we + * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI + * list. 32 entries are processed initially and PLOGI is initited for each one. + * Completions / Events for each node are funnelled thru the state machine. As + * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting + * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is + * identically 0, then we are done. We have now completed discovery / RSCN + * handling. Upon completion, ALL nodes should be on either the mapped or + * unmapped lists. + */ + +/* Defines for Node List Entry Events that could happen */ +#define NLP_EVT_RCV_PLOGI 0x0 /* Rcv'd an ELS PLOGI command */ +#define NLP_EVT_RCV_PRLI 0x1 /* Rcv'd an ELS PRLI command */ +#define NLP_EVT_RCV_LOGO 0x2 /* Rcv'd an ELS LOGO command */ +#define NLP_EVT_RCV_ADISC 0x3 /* Rcv'd an ELS ADISC command */ +#define NLP_EVT_RCV_PDISC 0x4 /* Rcv'd an ELS PDISC command */ +#define NLP_EVT_RCV_PRLO 0x5 /* Rcv'd an ELS PRLO command */ +#define NLP_EVT_CMPL_PLOGI 0x6 /* Sent an ELS PLOGI command */ +#define NLP_EVT_CMPL_PRLI 0x7 /* Sent an ELS PRLI command */ +#define NLP_EVT_CMPL_LOGO 0x8 /* Sent an ELS LOGO command */ +#define NLP_EVT_CMPL_ADISC 0x9 /* Sent an ELS ADISC command */ +#define NLP_EVT_CMPL_REG_LOGIN 0xa /* REG_LOGIN mbox cmd completed */ +#define NLP_EVT_DEVICE_RM 0xb /* Device not found in NS / ALPAmap */ +#define NLP_EVT_DEVICE_RECOVERY 0xc /* Device existence unknown */ +#define NLP_EVT_MAX_EVENT 0xd +#define NLP_EVT_NOTHING_PENDING 0xff -- cgit v1.2.3