From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/pcmcia/nsp_cs.h | 377 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 377 insertions(+) create mode 100644 drivers/scsi/pcmcia/nsp_cs.h (limited to 'drivers/scsi/pcmcia/nsp_cs.h') diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h new file mode 100644 index 000000000..e1ee8ef90 --- /dev/null +++ b/drivers/scsi/pcmcia/nsp_cs.h @@ -0,0 +1,377 @@ +/*=======================================================/ + Header file for nsp_cs.c + By: YOKOTA Hiroshi + + Ver.1.0 : Cut unused lines. + Ver 0.1 : Initial version. + + This software may be used and distributed according to the terms of + the GNU General Public License. + +=========================================================*/ + +#ifndef __nsp_cs__ +#define __nsp_cs__ + +/* for debugging */ +//#define NSP_DEBUG 9 + +/* +#define static +#define inline +*/ + +/************************************ + * Some useful macros... + */ + +/* SCSI initiator must be ID 7 */ +#define NSP_INITIATOR_ID 7 + +#define NSP_SELTIMEOUT 200 + +/*************************************************************************** + * register definitions + ***************************************************************************/ +/*======================================================================== + * base register + ========================================================================*/ +#define IRQCONTROL 0x00 /* R */ +# define IRQCONTROL_RESELECT_CLEAR BIT(0) +# define IRQCONTROL_PHASE_CHANGE_CLEAR BIT(1) +# define IRQCONTROL_TIMER_CLEAR BIT(2) +# define IRQCONTROL_FIFO_CLEAR BIT(3) +# define IRQCONTROL_ALLMASK 0xff +# define IRQCONTROL_ALLCLEAR (IRQCONTROL_RESELECT_CLEAR | \ + IRQCONTROL_PHASE_CHANGE_CLEAR | \ + IRQCONTROL_TIMER_CLEAR | \ + IRQCONTROL_FIFO_CLEAR ) +# define IRQCONTROL_IRQDISABLE 0xf0 + +#define IRQSTATUS 0x00 /* W */ +# define IRQSTATUS_SCSI BIT(0) +# define IRQSTATUS_TIMER BIT(2) +# define IRQSTATUS_FIFO BIT(3) +# define IRQSTATUS_MASK 0x0f + +#define IFSELECT 0x01 /* W */ +# define IF_IFSEL BIT(0) +# define IF_REGSEL BIT(2) + +#define FIFOSTATUS 0x01 /* R */ +# define FIFOSTATUS_CHIP_REVISION_MASK 0x0f +# define FIFOSTATUS_CHIP_ID_MASK 0x70 +# define FIFOSTATUS_FULL_EMPTY BIT(7) + +#define INDEXREG 0x02 /* R/W */ +#define DATAREG 0x03 /* R/W */ +#define FIFODATA 0x04 /* R/W */ +#define FIFODATA1 0x05 /* R/W */ +#define FIFODATA2 0x06 /* R/W */ +#define FIFODATA3 0x07 /* R/W */ + +/*==================================================================== + * indexed register + ====================================================================*/ +#define EXTBUSCTRL 0x10 /* R/W,deleted */ + +#define CLOCKDIV 0x11 /* R/W */ +# define CLOCK_40M 0x02 +# define CLOCK_20M 0x01 +# define FAST_20 BIT(2) + +#define TERMPWRCTRL 0x13 /* R/W */ +# define POWER_ON BIT(0) + +#define SCSIIRQMODE 0x15 /* R/W */ +# define SCSI_PHASE_CHANGE_EI BIT(0) +# define RESELECT_EI BIT(4) +# define FIFO_IRQ_EI BIT(5) +# define SCSI_RESET_IRQ_EI BIT(6) + +#define IRQPHASESENCE 0x16 /* R */ +# define LATCHED_MSG BIT(0) +# define LATCHED_IO BIT(1) +# define LATCHED_CD BIT(2) +# define LATCHED_BUS_FREE BIT(3) +# define PHASE_CHANGE_IRQ BIT(4) +# define RESELECT_IRQ BIT(5) +# define FIFO_IRQ BIT(6) +# define SCSI_RESET_IRQ BIT(7) + +#define TIMERCOUNT 0x17 /* R/W */ + +#define SCSIBUSCTRL 0x18 /* R/W */ +# define SCSI_SEL BIT(0) +# define SCSI_RST BIT(1) +# define SCSI_DATAOUT_ENB BIT(2) +# define SCSI_ATN BIT(3) +# define SCSI_ACK BIT(4) +# define SCSI_BSY BIT(5) +# define AUTODIRECTION BIT(6) +# define ACKENB BIT(7) + +#define SCSIBUSMON 0x19 /* R */ + +#define SETARBIT 0x1A /* W */ +# define ARBIT_GO BIT(0) +# define ARBIT_FLAG_CLEAR BIT(1) + +#define ARBITSTATUS 0x1A /* R */ +/*# define ARBIT_GO BIT(0)*/ +# define ARBIT_WIN BIT(1) +# define ARBIT_FAIL BIT(2) +# define RESELECT_FLAG BIT(3) + +#define PARITYCTRL 0x1B /* W */ +#define PARITYSTATUS 0x1B /* R */ + +#define COMMANDCTRL 0x1C /* W */ +# define CLEAR_COMMAND_POINTER BIT(0) +# define AUTO_COMMAND_GO BIT(1) + +#define RESELECTID 0x1C /* R */ +#define COMMANDDATA 0x1D /* R/W */ + +#define POINTERCLR 0x1E /* W */ +# define POINTER_CLEAR BIT(0) +# define ACK_COUNTER_CLEAR BIT(1) +# define REQ_COUNTER_CLEAR BIT(2) +# define HOST_COUNTER_CLEAR BIT(3) +# define READ_SOURCE (BIT(4) | BIT(5)) +# define ACK_COUNTER (0) +# define REQ_COUNTER (BIT(4)) +# define HOST_COUNTER (BIT(5)) + +#define TRANSFERCOUNT 0x1E /* R */ + +#define TRANSFERMODE 0x20 /* R/W */ +# define MODE_MEM8 BIT(0) +# define MODE_MEM32 BIT(1) +# define MODE_ADR24 BIT(2) +# define MODE_ADR32 BIT(3) +# define MODE_IO8 BIT(4) +# define MODE_IO32 BIT(5) +# define TRANSFER_GO BIT(6) +# define BRAIND BIT(7) + +#define SYNCREG 0x21 /* R/W */ +# define SYNCREG_OFFSET_MASK 0x0f +# define SYNCREG_PERIOD_MASK 0xf0 +# define SYNCREG_PERIOD_SHIFT 4 + +#define SCSIDATALATCH 0x22 /* W */ +#define SCSIDATAIN 0x22 /* R */ +#define SCSIDATAWITHACK 0x23 /* R/W */ +#define SCAMCONTROL 0x24 /* W */ +#define SCAMSTATUS 0x24 /* R */ +#define SCAMDATA 0x25 /* R/W */ + +#define OTHERCONTROL 0x26 /* R/W */ +# define TPL_ROM_WRITE_EN BIT(0) +# define TPWR_OUT BIT(1) +# define TPWR_SENSE BIT(2) +# define RA8_CONTROL BIT(3) + +#define ACKWIDTH 0x27 /* R/W */ +#define CLRTESTPNT 0x28 /* W */ +#define ACKCNTLD 0x29 /* W */ +#define REQCNTLD 0x2A /* W */ +#define HSTCNTLD 0x2B /* W */ +#define CHECKSUM 0x2C /* R/W */ + +/************************************************************************ + * Input status bit definitions. + ************************************************************************/ +#define S_MESSAGE BIT(0) /* Message line from SCSI bus */ +#define S_IO BIT(1) /* Input/Output line from SCSI bus */ +#define S_CD BIT(2) /* Command/Data line from SCSI bus */ +#define S_BUSY BIT(3) /* Busy line from SCSI bus */ +#define S_ACK BIT(4) /* Acknowledge line from SCSI bus */ +#define S_REQUEST BIT(5) /* Request line from SCSI bus */ +#define S_SELECT BIT(6) /* */ +#define S_ATN BIT(7) /* */ + +/*********************************************************************** + * Useful Bus Monitor status combinations. + ***********************************************************************/ +#define BUSMON_SEL S_SELECT +#define BUSMON_BSY S_BUSY +#define BUSMON_REQ S_REQUEST +#define BUSMON_IO S_IO +#define BUSMON_ACK S_ACK +#define BUSMON_BUS_FREE 0 +#define BUSMON_COMMAND ( S_BUSY | S_CD | S_REQUEST ) +#define BUSMON_MESSAGE_IN ( S_BUSY | S_CD | S_IO | S_MESSAGE | S_REQUEST ) +#define BUSMON_MESSAGE_OUT ( S_BUSY | S_CD | S_MESSAGE | S_REQUEST ) +#define BUSMON_DATA_IN ( S_BUSY | S_IO | S_REQUEST ) +#define BUSMON_DATA_OUT ( S_BUSY | S_REQUEST ) +#define BUSMON_STATUS ( S_BUSY | S_CD | S_IO | S_REQUEST ) +#define BUSMON_SELECT ( S_IO | S_SELECT ) +#define BUSMON_RESELECT ( S_IO | S_SELECT ) +#define BUSMON_PHASE_MASK ( S_CD | S_IO | S_MESSAGE | S_SELECT ) + +#define BUSPHASE_SELECT ( BUSMON_SELECT & BUSMON_PHASE_MASK ) +#define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) +#define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) +#define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) +#define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) +#define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) +#define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) + +/*====================================================================*/ + +typedef struct scsi_info_t { + struct pcmcia_device *p_dev; + struct Scsi_Host *host; + int stop; +} scsi_info_t; + + +/* synchronous transfer negotiation data */ +typedef struct _sync_data { + unsigned int SyncNegotiation; +#define SYNC_NOT_YET 0 +#define SYNC_OK 1 +#define SYNC_NG 2 + + unsigned int SyncPeriod; + unsigned int SyncOffset; + unsigned char SyncRegister; + unsigned char AckWidth; +} sync_data; + +typedef struct _nsp_hw_data { + unsigned int BaseAddress; + unsigned int NumAddress; + unsigned int IrqNumber; + + unsigned long MmioAddress; +#define NSP_MMIO_OFFSET 0x0800 + unsigned long MmioLength; + + unsigned char ScsiClockDiv; + + unsigned char TransferMode; + + int TimerCount; + int SelectionTimeOut; + struct scsi_cmnd *CurrentSC; + //int CurrnetTarget; + + int FifoCount; + +#define MSGBUF_SIZE 20 + unsigned char MsgBuffer[MSGBUF_SIZE]; + int MsgLen; + +#define N_TARGET 8 + sync_data Sync[N_TARGET]; + + char nspinfo[110]; /* description */ + spinlock_t Lock; + + scsi_info_t *ScsiInfo; /* attach <-> detect glue */ + + +#ifdef NSP_DEBUG + int CmdId; /* Accepted command serial number. + Used for debugging. */ +#endif +} nsp_hw_data; + +/**************************************************************************** + * + */ + +/* Card service functions */ +static void nsp_cs_detach (struct pcmcia_device *p_dev); +static void nsp_cs_release(struct pcmcia_device *link); +static int nsp_cs_config (struct pcmcia_device *link); + +/* Linux SCSI subsystem specific functions */ +static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht); +static const char *nsp_info (struct Scsi_Host *shpnt); +static int nsp_show_info (struct seq_file *m, + struct Scsi_Host *host); +static int nsp_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *SCpnt); + +/* Error handler */ +/*static int nsp_eh_abort (struct scsi_cmnd *SCpnt);*/ +/*static int nsp_eh_device_reset(struct scsi_cmnd *SCpnt);*/ +static int nsp_eh_bus_reset (struct scsi_cmnd *SCpnt); +static int nsp_eh_host_reset (struct scsi_cmnd *SCpnt); +static int nsp_bus_reset (nsp_hw_data *data); + +/* */ +static void nsphw_init (nsp_hw_data *data); +static bool nsphw_start_selection(struct scsi_cmnd *SCpnt); +static void nsp_start_timer (struct scsi_cmnd *SCpnt, int time); +static int nsp_fifo_count (struct scsi_cmnd *SCpnt); +static void nsp_pio_read (struct scsi_cmnd *SCpnt); +static void nsp_pio_write (struct scsi_cmnd *SCpnt); +static int nsp_nexus (struct scsi_cmnd *SCpnt); +static void nsp_scsi_done (struct scsi_cmnd *SCpnt); +static int nsp_analyze_sdtr (struct scsi_cmnd *SCpnt); +static int nsp_negate_signal (struct scsi_cmnd *SCpnt, + unsigned char mask, char *str); +static int nsp_expect_signal (struct scsi_cmnd *SCpnt, + unsigned char current_phase, + unsigned char mask); +static int nsp_xfer (struct scsi_cmnd *SCpnt, int phase); +static int nsp_dataphase_bypass (struct scsi_cmnd *SCpnt); +static void nsp_reselected (struct scsi_cmnd *SCpnt); +static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht); + +/* Interrupt handler */ +//static irqreturn_t nspintr(int irq, void *dev_id); + +/* Debug */ +#ifdef NSP_DEBUG +static void show_command (struct scsi_cmnd *SCpnt); +static void show_phase (struct scsi_cmnd *SCpnt); +static void show_busphase(unsigned char stat); +static void show_message (nsp_hw_data *data); +#else +# define show_command(ptr) /* */ +# define show_phase(SCpnt) /* */ +# define show_busphase(stat) /* */ +# define show_message(data) /* */ +#endif + +/* + * SCSI phase + */ +enum _scsi_phase { + PH_UNDETERMINED , + PH_ARBSTART , + PH_SELSTART , + PH_SELECTED , + PH_COMMAND , + PH_DATA , + PH_STATUS , + PH_MSG_IN , + PH_MSG_OUT , + PH_DISCONNECT , + PH_RESELECT , + PH_ABORT , + PH_RESET +}; + +enum _data_in_out { + IO_UNKNOWN, + IO_IN, + IO_OUT +}; + +enum _burst_mode { + BURST_IO8 = 0, + BURST_IO32 = 1, + BURST_MEM32 = 2, +}; + +/* scatter-gather table */ +#define BUFFER_ADDR(SCpnt) ((char *)(sg_virt(nsp_priv(SCpnt)->buffer))) + +#endif /*__nsp_cs__*/ +/* end */ -- cgit v1.2.3