From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/scsi_dh.c | 373 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 373 insertions(+) create mode 100644 drivers/scsi/scsi_dh.c (limited to 'drivers/scsi/scsi_dh.c') diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c new file mode 100644 index 000000000..7b56e00c7 --- /dev/null +++ b/drivers/scsi/scsi_dh.c @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * SCSI device handler infrastructure. + * + * Copyright IBM Corporation, 2007 + * Authors: + * Chandra Seetharaman + * Mike Anderson + */ + +#include +#include +#include +#include "scsi_priv.h" + +static DEFINE_SPINLOCK(list_lock); +static LIST_HEAD(scsi_dh_list); + +struct scsi_dh_blist { + const char *vendor; + const char *model; + const char *driver; +}; + +static const struct scsi_dh_blist scsi_dh_blist[] = { + {"DGC", "RAID", "emc" }, + {"DGC", "DISK", "emc" }, + {"DGC", "VRAID", "emc" }, + + {"COMPAQ", "MSA1000 VOLUME", "hp_sw" }, + {"COMPAQ", "HSV110", "hp_sw" }, + {"HP", "HSV100", "hp_sw"}, + {"DEC", "HSG80", "hp_sw"}, + + {"IBM", "1722", "rdac", }, + {"IBM", "1724", "rdac", }, + {"IBM", "1726", "rdac", }, + {"IBM", "1742", "rdac", }, + {"IBM", "1745", "rdac", }, + {"IBM", "1746", "rdac", }, + {"IBM", "1813", "rdac", }, + {"IBM", "1814", "rdac", }, + {"IBM", "1815", "rdac", }, + {"IBM", "1818", "rdac", }, + {"IBM", "3526", "rdac", }, + {"IBM", "3542", "rdac", }, + {"IBM", "3552", "rdac", }, + {"SGI", "TP9300", "rdac", }, + {"SGI", "TP9400", "rdac", }, + {"SGI", "TP9500", "rdac", }, + {"SGI", "TP9700", "rdac", }, + {"SGI", "IS", "rdac", }, + {"STK", "OPENstorage", "rdac", }, + {"STK", "FLEXLINE 380", "rdac", }, + {"STK", "BladeCtlr", "rdac", }, + {"SUN", "CSM", "rdac", }, + {"SUN", "LCSM100", "rdac", }, + {"SUN", "STK6580_6780", "rdac", }, + {"SUN", "SUN_6180", "rdac", }, + {"SUN", "ArrayStorage", "rdac", }, + {"DELL", "MD3", "rdac", }, + {"NETAPP", "INF-01-00", "rdac", }, + {"LSI", "INF-01-00", "rdac", }, + {"ENGENIO", "INF-01-00", "rdac", }, + {"LENOVO", "DE_Series", "rdac", }, + {"FUJITSU", "ETERNUS_AHB", "rdac", }, + {NULL, NULL, NULL }, +}; + +static const char * +scsi_dh_find_driver(struct scsi_device *sdev) +{ + const struct scsi_dh_blist *b; + + if (scsi_device_tpgs(sdev)) + return "alua"; + + for (b = scsi_dh_blist; b->vendor; b++) { + if (!strncmp(sdev->vendor, b->vendor, strlen(b->vendor)) && + !strncmp(sdev->model, b->model, strlen(b->model))) { + return b->driver; + } + } + return NULL; +} + + +static struct scsi_device_handler *__scsi_dh_lookup(const char *name) +{ + struct scsi_device_handler *tmp, *found = NULL; + + spin_lock(&list_lock); + list_for_each_entry(tmp, &scsi_dh_list, list) { + if (!strncmp(tmp->name, name, strlen(tmp->name))) { + found = tmp; + break; + } + } + spin_unlock(&list_lock); + return found; +} + +static struct scsi_device_handler *scsi_dh_lookup(const char *name) +{ + struct scsi_device_handler *dh; + + if (!name || strlen(name) == 0) + return NULL; + + dh = __scsi_dh_lookup(name); + if (!dh) { + request_module("scsi_dh_%s", name); + dh = __scsi_dh_lookup(name); + } + + return dh; +} + +/* + * scsi_dh_handler_attach - Attach a device handler to a device + * @sdev - SCSI device the device handler should attach to + * @scsi_dh - The device handler to attach + */ +static int scsi_dh_handler_attach(struct scsi_device *sdev, + struct scsi_device_handler *scsi_dh) +{ + int error, ret = 0; + + if (!try_module_get(scsi_dh->module)) + return -EINVAL; + + error = scsi_dh->attach(sdev); + if (error != SCSI_DH_OK) { + switch (error) { + case SCSI_DH_NOMEM: + ret = -ENOMEM; + break; + case SCSI_DH_RES_TEMP_UNAVAIL: + ret = -EAGAIN; + break; + case SCSI_DH_DEV_UNSUPP: + case SCSI_DH_NOSYS: + ret = -ENODEV; + break; + default: + ret = -EINVAL; + break; + } + if (ret != -ENODEV) + sdev_printk(KERN_ERR, sdev, "%s: Attach failed (%d)\n", + scsi_dh->name, error); + module_put(scsi_dh->module); + } else + sdev->handler = scsi_dh; + + return ret; +} + +/* + * scsi_dh_handler_detach - Detach a device handler from a device + * @sdev - SCSI device the device handler should be detached from + */ +static void scsi_dh_handler_detach(struct scsi_device *sdev) +{ + sdev->handler->detach(sdev); + sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", sdev->handler->name); + module_put(sdev->handler->module); +} + +void scsi_dh_add_device(struct scsi_device *sdev) +{ + struct scsi_device_handler *devinfo = NULL; + const char *drv; + + drv = scsi_dh_find_driver(sdev); + if (drv) + devinfo = __scsi_dh_lookup(drv); + /* + * device_handler is optional, so ignore errors + * from scsi_dh_handler_attach() + */ + if (devinfo) + (void)scsi_dh_handler_attach(sdev, devinfo); +} + +void scsi_dh_release_device(struct scsi_device *sdev) +{ + if (sdev->handler) + scsi_dh_handler_detach(sdev); +} + +/* + * scsi_register_device_handler - register a device handler personality + * module. + * @scsi_dh - device handler to be registered. + * + * Returns 0 on success, -EBUSY if handler already registered. + */ +int scsi_register_device_handler(struct scsi_device_handler *scsi_dh) +{ + if (__scsi_dh_lookup(scsi_dh->name)) + return -EBUSY; + + if (!scsi_dh->attach || !scsi_dh->detach) + return -EINVAL; + + spin_lock(&list_lock); + list_add(&scsi_dh->list, &scsi_dh_list); + spin_unlock(&list_lock); + + printk(KERN_INFO "%s: device handler registered\n", scsi_dh->name); + + return SCSI_DH_OK; +} +EXPORT_SYMBOL_GPL(scsi_register_device_handler); + +/* + * scsi_unregister_device_handler - register a device handler personality + * module. + * @scsi_dh - device handler to be unregistered. + * + * Returns 0 on success, -ENODEV if handler not registered. + */ +int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh) +{ + if (!__scsi_dh_lookup(scsi_dh->name)) + return -ENODEV; + + spin_lock(&list_lock); + list_del(&scsi_dh->list); + spin_unlock(&list_lock); + printk(KERN_INFO "%s: device handler unregistered\n", scsi_dh->name); + + return SCSI_DH_OK; +} +EXPORT_SYMBOL_GPL(scsi_unregister_device_handler); + +/* + * scsi_dh_activate - activate the path associated with the scsi_device + * corresponding to the given request queue. + * Returns immediately without waiting for activation to be completed. + * @q - Request queue that is associated with the scsi_device to be + * activated. + * @fn - Function to be called upon completion of the activation. + * Function fn is called with data (below) and the error code. + * Function fn may be called from the same calling context. So, + * do not hold the lock in the caller which may be needed in fn. + * @data - data passed to the function fn upon completion. + * + */ +int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) +{ + struct scsi_device *sdev; + int err = SCSI_DH_NOSYS; + + sdev = scsi_device_from_queue(q); + if (!sdev) { + if (fn) + fn(data, err); + return err; + } + + if (!sdev->handler) + goto out_fn; + err = SCSI_DH_NOTCONN; + if (sdev->sdev_state == SDEV_CANCEL || + sdev->sdev_state == SDEV_DEL) + goto out_fn; + + err = SCSI_DH_DEV_OFFLINED; + if (sdev->sdev_state == SDEV_OFFLINE) + goto out_fn; + + if (sdev->handler->activate) + err = sdev->handler->activate(sdev, fn, data); + +out_put_device: + put_device(&sdev->sdev_gendev); + return err; + +out_fn: + if (fn) + fn(data, err); + goto out_put_device; +} +EXPORT_SYMBOL_GPL(scsi_dh_activate); + +/* + * scsi_dh_set_params - set the parameters for the device as per the + * string specified in params. + * @q - Request queue that is associated with the scsi_device for + * which the parameters to be set. + * @params - parameters in the following format + * "no_of_params\0param1\0param2\0param3\0...\0" + * for example, string for 2 parameters with value 10 and 21 + * is specified as "2\010\021\0". + */ +int scsi_dh_set_params(struct request_queue *q, const char *params) +{ + struct scsi_device *sdev; + int err = -SCSI_DH_NOSYS; + + sdev = scsi_device_from_queue(q); + if (!sdev) + return err; + + if (sdev->handler && sdev->handler->set_params) + err = sdev->handler->set_params(sdev, params); + put_device(&sdev->sdev_gendev); + return err; +} +EXPORT_SYMBOL_GPL(scsi_dh_set_params); + +/* + * scsi_dh_attach - Attach device handler + * @q - Request queue that is associated with the scsi_device + * the handler should be attached to + * @name - name of the handler to attach + */ +int scsi_dh_attach(struct request_queue *q, const char *name) +{ + struct scsi_device *sdev; + struct scsi_device_handler *scsi_dh; + int err = 0; + + sdev = scsi_device_from_queue(q); + if (!sdev) + return -ENODEV; + + scsi_dh = scsi_dh_lookup(name); + if (!scsi_dh) { + err = -EINVAL; + goto out_put_device; + } + + if (sdev->handler) { + if (sdev->handler != scsi_dh) + err = -EBUSY; + goto out_put_device; + } + + err = scsi_dh_handler_attach(sdev, scsi_dh); + +out_put_device: + put_device(&sdev->sdev_gendev); + return err; +} +EXPORT_SYMBOL_GPL(scsi_dh_attach); + +/* + * scsi_dh_attached_handler_name - Get attached device handler's name + * @q - Request queue that is associated with the scsi_device + * that may have a device handler attached + * @gfp - the GFP mask used in the kmalloc() call when allocating memory + * + * Returns name of attached handler, NULL if no handler is attached. + * Caller must take care to free the returned string. + */ +const char *scsi_dh_attached_handler_name(struct request_queue *q, gfp_t gfp) +{ + struct scsi_device *sdev; + const char *handler_name = NULL; + + sdev = scsi_device_from_queue(q); + if (!sdev) + return NULL; + + if (sdev->handler) + handler_name = kstrdup(sdev->handler->name, gfp); + put_device(&sdev->sdev_gendev); + return handler_name; +} +EXPORT_SYMBOL_GPL(scsi_dh_attached_handler_name); -- cgit v1.2.3