From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/scsi/wd719x.h | 248 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 248 insertions(+) create mode 100644 drivers/scsi/wd719x.h (limited to 'drivers/scsi/wd719x.h') diff --git a/drivers/scsi/wd719x.h b/drivers/scsi/wd719x.h new file mode 100644 index 000000000..966ab0fb4 --- /dev/null +++ b/drivers/scsi/wd719x.h @@ -0,0 +1,248 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _WD719X_H_ +#define _WD719X_H_ + +#define WD719X_SG 255 /* Scatter/gather size */ + +struct wd719x_sglist { + __le32 ptr; + __le32 length; +} __packed; + +enum wd719x_card_type { + WD719X_TYPE_UNKNOWN = 0, + WD719X_TYPE_7193, + WD719X_TYPE_7197, + WD719X_TYPE_7296, +}; + +union wd719x_regs { + __le32 all; /* All Status at once */ + struct { + u8 OPC; /* Opcode register */ + u8 SCSI; /* SCSI Errors */ + u8 SUE; /* Spider unique Errors */ + u8 INT; /* Interrupt Status */ + } bytes; +}; + +/* Spider Command Block (SCB) */ +struct wd719x_scb { + __le32 Int_SCB; /* 00-03 Internal SCB link pointer (must be cleared) */ + u8 SCB_opcode; /* 04 SCB Command opcode */ + u8 CDB_tag; /* 05 SCSI Tag byte for CDB queues (0 if untagged) */ + u8 lun; /* 06 SCSI LUN */ + u8 devid; /* 07 SCSI Device ID */ + u8 CDB[16]; /* 08-23 SCSI CDB (16 bytes as defined by ANSI spec. */ + __le32 data_p; /* 24-27 Data transfer address (or SG list address) */ + __le32 data_length; /* 28-31 Data transfer Length (or SG list length) */ + __le32 CDB_link; /* 32-35 SCSI CDB Link Ptr */ + __le32 sense_buf; /* 36-39 Auto request sense buffer address */ + u8 sense_buf_length;/* 40 Auto request sense transfer length */ + u8 reserved; /* 41 reserved */ + u8 SCB_options; /* 42 SCB-options */ + u8 SCB_tag_msg; /* 43 Tagged messages options */ + /* Not filled in by host */ + __le32 req_ptr; /* 44-47 Ptr to Host Request returned on interrupt */ + u8 host_opcode; /* 48 Host Command Opcode (same as AMR_00) */ + u8 scsi_stat; /* 49 SCSI Status returned */ + u8 ret_error; /* 50 SPIDER Unique Error Code returned (SUE) */ + u8 int_stat; /* 51 Message u8 / Interrupt Status byte returned */ + __le32 transferred; /* 52-55 Bytes Transferred */ + u8 last_trans[3]; /* 56-58 Bytes Transferred in last session */ + u8 length; /* 59 SCSI Messages Length (1-8) */ + u8 sync_offset; /* 60 Synchronous offset */ + u8 sync_rate; /* 61 Synchronous rate */ + u8 flags[2]; /* 62-63 SCB specific flags (local to each thread) */ + /* everything below is for driver use (not used by card) */ + dma_addr_t phys; /* bus address of the SCB */ + dma_addr_t dma_handle; + struct scsi_cmnd *cmd; /* a copy of the pointer we were passed */ + struct list_head list; + struct wd719x_sglist sg_list[WD719X_SG] __aligned(8); /* SG list */ +} __packed; + +struct wd719x { + struct Scsi_Host *sh; /* pointer to host structure */ + struct pci_dev *pdev; + void __iomem *base; + enum wd719x_card_type type; /* type of card */ + void *fw_virt; /* firmware buffer CPU address */ + dma_addr_t fw_phys; /* firmware buffer bus address */ + size_t fw_size; /* firmware buffer size */ + struct wd719x_host_param *params; /* host parameters (EEPROM) */ + dma_addr_t params_phys; /* host parameters bus address */ + void *hash_virt; /* hash table CPU address */ + dma_addr_t hash_phys; /* hash table bus address */ + struct list_head active_scbs; +}; + +/* timeout delays in microsecs */ +#define WD719X_WAIT_FOR_CMD_READY 500 +#define WD719X_WAIT_FOR_RISC 2000 +#define WD719X_WAIT_FOR_SCSI_RESET 3000000 + +/* All commands except 0x00 generate an interrupt */ +#define WD719X_CMD_READY 0x00 /* Command register ready (or noop) */ +#define WD719X_CMD_INIT_RISC 0x01 /* Initialize RISC */ +/* 0x02 is reserved */ +#define WD719X_CMD_BUSRESET 0x03 /* Assert SCSI bus reset */ +#define WD719X_CMD_READ_FIRMVER 0x04 /* Read the Firmware Revision */ +#define WD719X_CMD_ECHO_BYTES 0x05 /* Echo command bytes (DW) */ +/* 0x06 is reserved */ +/* 0x07 is reserved */ +#define WD719X_CMD_GET_PARAM 0x08 /* Get programmable parameters */ +#define WD719X_CMD_SET_PARAM 0x09 /* Set programmable parameters */ +#define WD719X_CMD_SLEEP 0x0a /* Put SPIDER to sleep */ +#define WD719X_CMD_READ_INIT 0x0b /* Read initialization parameters */ +#define WD719X_CMD_RESTORE_INIT 0x0c /* Restore initialization parameters */ +/* 0x0d is reserved */ +/* 0x0e is reserved */ +/* 0x0f is reserved */ +#define WD719X_CMD_ABORT_TAG 0x10 /* Send Abort tag message to target */ +#define WD719X_CMD_ABORT 0x11 /* Send Abort message to target */ +#define WD719X_CMD_RESET 0x12 /* Send Reset message to target */ +#define WD719X_CMD_INIT_SCAM 0x13 /* Initiate SCAM */ +#define WD719X_CMD_GET_SYNC 0x14 /* Get synchronous rates */ +#define WD719X_CMD_SET_SYNC 0x15 /* Set synchronous rates */ +#define WD719X_CMD_GET_WIDTH 0x16 /* Get SCSI bus width */ +#define WD719X_CMD_SET_WIDTH 0x17 /* Set SCSI bus width */ +#define WD719X_CMD_GET_TAGS 0x18 /* Get tag flags */ +#define WD719X_CMD_SET_TAGS 0x19 /* Set tag flags */ +#define WD719X_CMD_GET_PARAM2 0x1a /* Get programmable params (format 2) */ +#define WD719X_CMD_SET_PARAM2 0x1b /* Set programmable params (format 2) */ +/* Commands with request pointers (mailbox) */ +#define WD719X_CMD_PROCESS_SCB 0x80 /* Process SCSI Control Block (SCB) */ +/* No interrupt generated on acceptance of SCB pointer */ + +/* interrupt status defines */ +#define WD719X_INT_NONE 0x00 /* No interrupt pending */ +#define WD719X_INT_NOERRORS 0x01 /* Command completed with no errors */ +#define WD719X_INT_LINKNOERRORS 0x02 /* link cmd completed with no errors */ +#define WD719X_INT_LINKNOSTATUS 0x03 /* link cmd completed with no flag set */ +#define WD719X_INT_ERRORSLOGGED 0x04 /* cmd completed with errors logged */ +#define WD719X_INT_SPIDERFAILED 0x05 /* cmd failed without valid SCSI status */ +#define WD719X_INT_BADINT 0x80 /* unsolicited interrupt */ +#define WD719X_INT_PIOREADY 0xf0 /* data ready for PIO output */ + +/* Spider Unique Error Codes (SUE) */ +#define WD719X_SUE_NOERRORS 0x00 /* No errors detected by SPIDER */ +#define WD719X_SUE_REJECTED 0x01 /* Command Rejected (bad opcode/param) */ +#define WD719X_SUE_SCBQFULL 0x02 /* SCB queue full */ +/* 0x03 is reserved */ +#define WD719X_SUE_TERM 0x04 /* Host terminated SCB via primative cmd */ +#define WD719X_SUE_CHAN1PAR 0x05 /* PCI Channel 1 parity error occurred */ +#define WD719X_SUE_CHAN1ABORT 0x06 /* PCI Channel 1 system abort occurred */ +#define WD719X_SUE_CHAN23PAR 0x07 /* PCI Channel 2/3 parity error occurred */ +#define WD719X_SUE_CHAN23ABORT 0x08 /* PCI Channel 2/3 system abort occurred */ +#define WD719X_SUE_TIMEOUT 0x10 /* Selection/reselection timeout */ +#define WD719X_SUE_RESET 0x11 /* SCSI bus reset occurred */ +#define WD719X_SUE_BUSERROR 0x12 /* SCSI bus error */ +#define WD719X_SUE_WRONGWAY 0x13 /* Wrong data transfer dir set by target */ +#define WD719X_SUE_BADPHASE 0x14 /* SCSI phase illegal or unexpected */ +#define WD719X_SUE_TOOLONG 0x15 /* target requested too much data */ +#define WD719X_SUE_BUSFREE 0x16 /* Unexpected SCSI bus free */ +#define WD719X_SUE_ARSDONE 0x17 /* Auto request sense executed */ +#define WD719X_SUE_IGNORED 0x18 /* SCSI message was ignored by target */ +#define WD719X_SUE_WRONGTAGS 0x19 /* Tagged SCB & tags off (or vice versa) */ +#define WD719X_SUE_BADTAGS 0x1a /* Wrong tag message type for target */ +#define WD719X_SUE_NOSCAMID 0x1b /* No SCAM soft ID available */ + +/* code sizes */ +#define WD719X_HASH_TABLE_SIZE 4096 + +/* Advanced Mode Registers */ +/* Regs 0x00..0x1f are for Advanced Mode of the card (RISC is running). */ +#define WD719X_AMR_COMMAND 0x00 +#define WD719X_AMR_CMD_PARAM 0x01 +#define WD719X_AMR_CMD_PARAM_2 0x02 +#define WD719X_AMR_CMD_PARAM_3 0x03 +#define WD719X_AMR_SCB_IN 0x04 + +#define WD719X_AMR_BIOS_SHARE_INT 0x0f + +#define WD719X_AMR_SCB_OUT 0x18 +#define WD719X_AMR_OP_CODE 0x1c +#define WD719X_AMR_SCSI_STATUS 0x1d +#define WD719X_AMR_SCB_ERROR 0x1e +#define WD719X_AMR_INT_STATUS 0x1f + +#define WD719X_DISABLE_INT 0x80 + +/* SCB flags */ +#define WD719X_SCB_FLAGS_CHECK_DIRECTION 0x01 +#define WD719X_SCB_FLAGS_PCI_TO_SCSI 0x02 +#define WD719X_SCB_FLAGS_AUTO_REQUEST_SENSE 0x10 +#define WD719X_SCB_FLAGS_DO_SCATTER_GATHER 0x20 +#define WD719X_SCB_FLAGS_NO_DISCONNECT 0x40 + +/* PCI Registers used for reset, initial code download */ +/* Regs 0x20..0x3f are for Normal (DOS) mode (RISC is asleep). */ +#define WD719X_PCI_GPIO_CONTROL 0x3C +#define WD719X_PCI_GPIO_DATA 0x3D +#define WD719X_PCI_PORT_RESET 0x3E +#define WD719X_PCI_MODE_SELECT 0x3F + +#define WD719X_PCI_EXTERNAL_ADDR 0x60 +#define WD719X_PCI_INTERNAL_ADDR 0x64 +#define WD719X_PCI_DMA_TRANSFER_SIZE 0x66 +#define WD719X_PCI_CHANNEL2_3CMD 0x68 +#define WD719X_PCI_CHANNEL2_3STATUS 0x69 + +#define WD719X_GPIO_ID_BITS 0x0a +#define WD719X_PRAM_BASE_ADDR 0x00 + +/* codes written to or read from the card */ +#define WD719X_PCI_RESET 0x01 +#define WD719X_ENABLE_ADVANCE_MODE 0x01 + +#define WD719X_START_CHANNEL2_3DMA 0x17 +#define WD719X_START_CHANNEL2_3DONE 0x01 +#define WD719X_START_CHANNEL2_3ABORT 0x20 + +/* 33C296 GPIO bits for EEPROM pins */ +#define WD719X_EE_DI (1 << 1) +#define WD719X_EE_CS (1 << 2) +#define WD719X_EE_CLK (1 << 3) +#define WD719X_EE_DO (1 << 4) + +/* EEPROM contents */ +struct wd719x_eeprom_header { + u8 sig1; + u8 sig2; + u8 version; + u8 checksum; + u8 cfg_offset; + u8 cfg_size; + u8 setup_offset; + u8 setup_size; +} __packed; + +#define WD719X_EE_SIG1 0 +#define WD719X_EE_SIG2 1 +#define WD719X_EE_VERSION 2 +#define WD719X_EE_CHECKSUM 3 +#define WD719X_EE_CFG_OFFSET 4 +#define WD719X_EE_CFG_SIZE 5 +#define WD719X_EE_SETUP_OFFSET 6 +#define WD719X_EE_SETUP_SIZE 7 + +#define WD719X_EE_SCSI_ID_MASK 0xf + +/* SPIDER Host Parameters Block (=EEPROM configuration block) */ +struct wd719x_host_param { + u8 ch_1_th; /* FIFO threshold */ + u8 scsi_conf; /* SCSI configuration */ + u8 own_scsi_id; /* controller SCSI ID */ + u8 sel_timeout; /* selection timeout*/ + u8 sleep_timer; /* seep timer */ + __le16 cdb_size;/* CDB size groups */ + __le16 tag_en; /* Tag msg enables (ID 0-15) */ + u8 scsi_pad; /* SCSI pad control */ + __le32 wide; /* WIDE msg options (ID 0-15) */ + __le32 sync; /* SYNC msg options (ID 0-15) */ + u8 soft_mask; /* soft error mask */ + u8 unsol_mask; /* unsolicited error mask */ +} __packed; + +#endif /* _WD719X_H_ */ -- cgit v1.2.3