From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/amlogic/meson-secure-pwrc.c | 231 ++++++++++++++++++++++++++++++++ 1 file changed, 231 insertions(+) create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c (limited to 'drivers/soc/amlogic/meson-secure-pwrc.c') diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c new file mode 100644 index 000000000..e93518763 --- /dev/null +++ b/drivers/soc/amlogic/meson-secure-pwrc.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. + * Author: Jianxin Pan + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PWRC_ON 1 +#define PWRC_OFF 0 + +struct meson_secure_pwrc_domain { + struct generic_pm_domain base; + unsigned int index; + struct meson_secure_pwrc *pwrc; +}; + +struct meson_secure_pwrc { + struct meson_secure_pwrc_domain *domains; + struct genpd_onecell_data xlate; + struct meson_sm_firmware *fw; +}; + +struct meson_secure_pwrc_domain_desc { + unsigned int index; + unsigned int flags; + char *name; + bool (*is_off)(struct meson_secure_pwrc_domain *pwrc_domain); +}; + +struct meson_secure_pwrc_domain_data { + unsigned int count; + struct meson_secure_pwrc_domain_desc *domains; +}; + +static bool pwrc_secure_is_off(struct meson_secure_pwrc_domain *pwrc_domain) +{ + int is_off = 1; + + if (meson_sm_call(pwrc_domain->pwrc->fw, SM_A1_PWRC_GET, &is_off, + pwrc_domain->index, 0, 0, 0, 0) < 0) + pr_err("failed to get power domain status\n"); + + return is_off; +} + +static int meson_secure_pwrc_off(struct generic_pm_domain *domain) +{ + int ret = 0; + struct meson_secure_pwrc_domain *pwrc_domain = + container_of(domain, struct meson_secure_pwrc_domain, base); + + if (meson_sm_call(pwrc_domain->pwrc->fw, SM_A1_PWRC_SET, NULL, + pwrc_domain->index, PWRC_OFF, 0, 0, 0) < 0) { + pr_err("failed to set power domain off\n"); + ret = -EINVAL; + } + + return ret; +} + +static int meson_secure_pwrc_on(struct generic_pm_domain *domain) +{ + int ret = 0; + struct meson_secure_pwrc_domain *pwrc_domain = + container_of(domain, struct meson_secure_pwrc_domain, base); + + if (meson_sm_call(pwrc_domain->pwrc->fw, SM_A1_PWRC_SET, NULL, + pwrc_domain->index, PWRC_ON, 0, 0, 0) < 0) { + pr_err("failed to set power domain on\n"); + ret = -EINVAL; + } + + return ret; +} + +#define SEC_PD(__name, __flag) \ +[PWRC_##__name##_ID] = \ +{ \ + .name = #__name, \ + .index = PWRC_##__name##_ID, \ + .is_off = pwrc_secure_is_off, \ + .flags = __flag, \ +} + +static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = { + SEC_PD(DSPA, 0), + SEC_PD(DSPB, 0), + /* UART should keep working in ATF after suspend and before resume */ + SEC_PD(UART, GENPD_FLAG_ALWAYS_ON), + /* DMC is for DDR PHY ana/dig and DMC, and should be always on */ + SEC_PD(DMC, GENPD_FLAG_ALWAYS_ON), + SEC_PD(I2C, 0), + SEC_PD(PSRAM, 0), + SEC_PD(ACODEC, 0), + SEC_PD(AUDIO, 0), + SEC_PD(OTP, 0), + SEC_PD(DMA, 0), + SEC_PD(SD_EMMC, 0), + SEC_PD(RAMA, 0), + /* SRAMB is used as ATF runtime memory, and should be always on */ + SEC_PD(RAMB, GENPD_FLAG_ALWAYS_ON), + SEC_PD(IR, 0), + SEC_PD(SPICC, 0), + SEC_PD(SPIFC, 0), + SEC_PD(USB, 0), + /* NIC is for the Arm NIC-400 interconnect, and should be always on */ + SEC_PD(NIC, GENPD_FLAG_ALWAYS_ON), + SEC_PD(PDMIN, 0), + SEC_PD(RSA, 0), +}; + +static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = { + SEC_PD(S4_DOS_HEVC, 0), + SEC_PD(S4_DOS_VDEC, 0), + SEC_PD(S4_VPU_HDMI, 0), + SEC_PD(S4_USB_COMB, 0), + SEC_PD(S4_GE2D, 0), + /* ETH is for ethernet online wakeup, and should be always on */ + SEC_PD(S4_ETH, GENPD_FLAG_ALWAYS_ON), + SEC_PD(S4_DEMOD, 0), + SEC_PD(S4_AUDIO, 0), +}; + +static int meson_secure_pwrc_probe(struct platform_device *pdev) +{ + int i; + struct device_node *sm_np; + struct meson_secure_pwrc *pwrc; + const struct meson_secure_pwrc_domain_data *match; + + match = of_device_get_match_data(&pdev->dev); + if (!match) { + dev_err(&pdev->dev, "failed to get match data\n"); + return -ENODEV; + } + + sm_np = of_find_compatible_node(NULL, NULL, "amlogic,meson-gxbb-sm"); + if (!sm_np) { + dev_err(&pdev->dev, "no secure-monitor node\n"); + return -ENODEV; + } + + pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL); + if (!pwrc) { + of_node_put(sm_np); + return -ENOMEM; + } + + pwrc->fw = meson_sm_get(sm_np); + of_node_put(sm_np); + if (!pwrc->fw) + return -EPROBE_DEFER; + + pwrc->xlate.domains = devm_kcalloc(&pdev->dev, match->count, + sizeof(*pwrc->xlate.domains), + GFP_KERNEL); + if (!pwrc->xlate.domains) + return -ENOMEM; + + pwrc->domains = devm_kcalloc(&pdev->dev, match->count, + sizeof(*pwrc->domains), GFP_KERNEL); + if (!pwrc->domains) + return -ENOMEM; + + pwrc->xlate.num_domains = match->count; + platform_set_drvdata(pdev, pwrc); + + for (i = 0 ; i < match->count ; ++i) { + struct meson_secure_pwrc_domain *dom = &pwrc->domains[i]; + + if (!match->domains[i].index) + continue; + + dom->pwrc = pwrc; + dom->index = match->domains[i].index; + dom->base.name = match->domains[i].name; + dom->base.flags = match->domains[i].flags; + dom->base.power_on = meson_secure_pwrc_on; + dom->base.power_off = meson_secure_pwrc_off; + + pm_genpd_init(&dom->base, NULL, match->domains[i].is_off(dom)); + + pwrc->xlate.domains[i] = &dom->base; + } + + return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate); +} + +static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = { + .domains = a1_pwrc_domains, + .count = ARRAY_SIZE(a1_pwrc_domains), +}; + +static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = { + .domains = s4_pwrc_domains, + .count = ARRAY_SIZE(s4_pwrc_domains), +}; + +static const struct of_device_id meson_secure_pwrc_match_table[] = { + { + .compatible = "amlogic,meson-a1-pwrc", + .data = &meson_secure_a1_pwrc_data, + }, + { + .compatible = "amlogic,meson-s4-pwrc", + .data = &meson_secure_s4_pwrc_data, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, meson_secure_pwrc_match_table); + +static struct platform_driver meson_secure_pwrc_driver = { + .probe = meson_secure_pwrc_probe, + .driver = { + .name = "meson_secure_pwrc", + .of_match_table = meson_secure_pwrc_match_table, + }, +}; +module_platform_driver(meson_secure_pwrc_driver); +MODULE_LICENSE("Dual MIT/GPL"); -- cgit v1.2.3