From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/aspeed/aspeed-lpc-ctrl.c | 366 +++++++++++++++++++++++++++++++++++ 1 file changed, 366 insertions(+) create mode 100644 drivers/soc/aspeed/aspeed-lpc-ctrl.c (limited to 'drivers/soc/aspeed/aspeed-lpc-ctrl.c') diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c new file mode 100644 index 000000000..258894ed2 --- /dev/null +++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c @@ -0,0 +1,366 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2017 IBM Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DEVICE_NAME "aspeed-lpc-ctrl" + +#define HICR5 0x80 +#define HICR5_ENL2H BIT(8) +#define HICR5_ENFWH BIT(10) + +#define HICR6 0x84 +#define SW_FWH2AHB BIT(17) + +#define HICR7 0x88 +#define HICR8 0x8c + +struct aspeed_lpc_ctrl { + struct miscdevice miscdev; + struct regmap *regmap; + struct clk *clk; + phys_addr_t mem_base; + resource_size_t mem_size; + u32 pnor_size; + u32 pnor_base; + bool fwh2ahb; + struct regmap *scu; +}; + +static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file) +{ + return container_of(file->private_data, struct aspeed_lpc_ctrl, + miscdev); +} + +static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); + unsigned long vsize = vma->vm_end - vma->vm_start; + pgprot_t prot = vma->vm_page_prot; + + if (vma->vm_pgoff + vma_pages(vma) > lpc_ctrl->mem_size >> PAGE_SHIFT) + return -EINVAL; + + /* ast2400/2500 AHB accesses are not cache coherent */ + prot = pgprot_noncached(prot); + + if (remap_pfn_range(vma, vma->vm_start, + (lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff, + vsize, prot)) + return -EAGAIN; + + return 0; +} + +static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd, + unsigned long param) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); + struct device *dev = file->private_data; + void __user *p = (void __user *)param; + struct aspeed_lpc_ctrl_mapping map; + u32 addr; + u32 size; + long rc; + + if (copy_from_user(&map, p, sizeof(map))) + return -EFAULT; + + if (map.flags != 0) + return -EINVAL; + + switch (cmd) { + case ASPEED_LPC_CTRL_IOCTL_GET_SIZE: + /* The flash windows don't report their size */ + if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY) + return -EINVAL; + + /* Support more than one window id in the future */ + if (map.window_id != 0) + return -EINVAL; + + /* If memory-region is not described in device tree */ + if (!lpc_ctrl->mem_size) { + dev_dbg(dev, "Didn't find reserved memory\n"); + return -ENXIO; + } + + map.size = lpc_ctrl->mem_size; + + return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0; + case ASPEED_LPC_CTRL_IOCTL_MAP: + + /* + * The top half of HICR7 is the MSB of the BMC address of the + * mapping. + * The bottom half of HICR7 is the MSB of the HOST LPC + * firmware space address of the mapping. + * + * The 1 bits in the top of half of HICR8 represent the bits + * (in the requested address) that should be ignored and + * replaced with those from the top half of HICR7. + * The 1 bits in the bottom half of HICR8 represent the bits + * (in the requested address) that should be kept and pass + * into the BMC address space. + */ + + /* + * It doesn't make sense to talk about a size or offset with + * low 16 bits set. Both HICR7 and HICR8 talk about the top 16 + * bits of addresses and sizes. + */ + + if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff)) + return -EINVAL; + + /* + * Because of the way the masks work in HICR8 offset has to + * be a multiple of size. + */ + if (map.offset & (map.size - 1)) + return -EINVAL; + + if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) { + if (!lpc_ctrl->pnor_size) { + dev_dbg(dev, "Didn't find host pnor flash\n"); + return -ENXIO; + } + addr = lpc_ctrl->pnor_base; + size = lpc_ctrl->pnor_size; + } else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) { + /* If memory-region is not described in device tree */ + if (!lpc_ctrl->mem_size) { + dev_dbg(dev, "Didn't find reserved memory\n"); + return -ENXIO; + } + addr = lpc_ctrl->mem_base; + size = lpc_ctrl->mem_size; + } else { + return -EINVAL; + } + + /* Check overflow first! */ + if (map.offset + map.size < map.offset || + map.offset + map.size > size) + return -EINVAL; + + if (map.size == 0 || map.size > size) + return -EINVAL; + + addr += map.offset; + + /* + * addr (host lpc address) is safe regardless of values. This + * simply changes the address the host has to request on its + * side of the LPC bus. This cannot impact the hosts own + * memory space by surprise as LPC specific accessors are + * required. The only strange thing that could be done is + * setting the lower 16 bits but the shift takes care of that. + */ + + rc = regmap_write(lpc_ctrl->regmap, HICR7, + (addr | (map.addr >> 16))); + if (rc) + return rc; + + rc = regmap_write(lpc_ctrl->regmap, HICR8, + (~(map.size - 1)) | ((map.size >> 16) - 1)); + if (rc) + return rc; + + /* + * Switch to FWH2AHB mode, AST2600 only. + */ + if (lpc_ctrl->fwh2ahb) { + /* + * Enable FWH2AHB in SCU debug control register 2. This + * does not turn it on, but makes it available for it + * to be configured in HICR6. + */ + regmap_update_bits(lpc_ctrl->scu, 0x0D8, BIT(2), 0); + + /* + * The other bits in this register are interrupt status bits + * that are cleared by writing 1. As we don't want to clear + * them, set only the bit of interest. + */ + regmap_write(lpc_ctrl->regmap, HICR6, SW_FWH2AHB); + } + + /* + * Enable LPC FHW cycles. This is required for the host to + * access the regions specified. + */ + return regmap_update_bits(lpc_ctrl->regmap, HICR5, + HICR5_ENFWH | HICR5_ENL2H, + HICR5_ENFWH | HICR5_ENL2H); + } + + return -EINVAL; +} + +static const struct file_operations aspeed_lpc_ctrl_fops = { + .owner = THIS_MODULE, + .mmap = aspeed_lpc_ctrl_mmap, + .unlocked_ioctl = aspeed_lpc_ctrl_ioctl, +}; + +static int aspeed_lpc_ctrl_probe(struct platform_device *pdev) +{ + struct aspeed_lpc_ctrl *lpc_ctrl; + struct device_node *node; + struct resource resm; + struct device *dev; + struct device_node *np; + int rc; + + dev = &pdev->dev; + + lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL); + if (!lpc_ctrl) + return -ENOMEM; + + /* If flash is described in device tree then store */ + node = of_parse_phandle(dev->of_node, "flash", 0); + if (!node) { + dev_dbg(dev, "Didn't find host pnor flash node\n"); + } else { + rc = of_address_to_resource(node, 1, &resm); + of_node_put(node); + if (rc) { + dev_err(dev, "Couldn't address to resource for flash\n"); + return rc; + } + + lpc_ctrl->pnor_size = resource_size(&resm); + lpc_ctrl->pnor_base = resm.start; + } + + + dev_set_drvdata(&pdev->dev, lpc_ctrl); + + /* If memory-region is described in device tree then store */ + node = of_parse_phandle(dev->of_node, "memory-region", 0); + if (!node) { + dev_dbg(dev, "Didn't find reserved memory\n"); + } else { + rc = of_address_to_resource(node, 0, &resm); + of_node_put(node); + if (rc) { + dev_err(dev, "Couldn't address to resource for reserved memory\n"); + return -ENXIO; + } + + lpc_ctrl->mem_size = resource_size(&resm); + lpc_ctrl->mem_base = resm.start; + + if (!is_power_of_2(lpc_ctrl->mem_size)) { + dev_err(dev, "Reserved memory size must be a power of 2, got %u\n", + (unsigned int)lpc_ctrl->mem_size); + return -EINVAL; + } + + if (!IS_ALIGNED(lpc_ctrl->mem_base, lpc_ctrl->mem_size)) { + dev_err(dev, "Reserved memory must be naturally aligned for size %u\n", + (unsigned int)lpc_ctrl->mem_size); + return -EINVAL; + } + } + + np = pdev->dev.parent->of_node; + if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") && + !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") && + !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) { + dev_err(dev, "unsupported LPC device binding\n"); + return -ENODEV; + } + + lpc_ctrl->regmap = syscon_node_to_regmap(np); + if (IS_ERR(lpc_ctrl->regmap)) { + dev_err(dev, "Couldn't get regmap\n"); + return -ENODEV; + } + + if (of_device_is_compatible(dev->of_node, "aspeed,ast2600-lpc-ctrl")) { + lpc_ctrl->fwh2ahb = true; + + lpc_ctrl->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2600-scu"); + if (IS_ERR(lpc_ctrl->scu)) { + dev_err(dev, "couldn't find scu\n"); + return PTR_ERR(lpc_ctrl->scu); + } + } + + lpc_ctrl->clk = devm_clk_get(dev, NULL); + if (IS_ERR(lpc_ctrl->clk)) + return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk), + "couldn't get clock\n"); + rc = clk_prepare_enable(lpc_ctrl->clk); + if (rc) { + dev_err(dev, "couldn't enable clock\n"); + return rc; + } + + lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR; + lpc_ctrl->miscdev.name = DEVICE_NAME; + lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops; + lpc_ctrl->miscdev.parent = dev; + rc = misc_register(&lpc_ctrl->miscdev); + if (rc) { + dev_err(dev, "Unable to register device\n"); + goto err; + } + + return 0; + +err: + clk_disable_unprepare(lpc_ctrl->clk); + return rc; +} + +static int aspeed_lpc_ctrl_remove(struct platform_device *pdev) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev); + + misc_deregister(&lpc_ctrl->miscdev); + clk_disable_unprepare(lpc_ctrl->clk); + + return 0; +} + +static const struct of_device_id aspeed_lpc_ctrl_match[] = { + { .compatible = "aspeed,ast2400-lpc-ctrl" }, + { .compatible = "aspeed,ast2500-lpc-ctrl" }, + { .compatible = "aspeed,ast2600-lpc-ctrl" }, + { }, +}; + +static struct platform_driver aspeed_lpc_ctrl_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_lpc_ctrl_match, + }, + .probe = aspeed_lpc_ctrl_probe, + .remove = aspeed_lpc_ctrl_remove, +}; + +module_platform_driver(aspeed_lpc_ctrl_driver); + +MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cyril Bur "); +MODULE_DESCRIPTION("Control for ASPEED LPC HOST to BMC mappings"); -- cgit v1.2.3