From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/aspeed/aspeed-p2a-ctrl.c | 444 +++++++++++++++++++++++++++++++++++ 1 file changed, 444 insertions(+) create mode 100644 drivers/soc/aspeed/aspeed-p2a-ctrl.c (limited to 'drivers/soc/aspeed/aspeed-p2a-ctrl.c') diff --git a/drivers/soc/aspeed/aspeed-p2a-ctrl.c b/drivers/soc/aspeed/aspeed-p2a-ctrl.c new file mode 100644 index 000000000..20b5fb2a2 --- /dev/null +++ b/drivers/soc/aspeed/aspeed-p2a-ctrl.c @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Google Inc + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Provides a simple driver to control the ASPEED P2A interface which allows + * the host to read and write to various regions of the BMC's memory. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DEVICE_NAME "aspeed-p2a-ctrl" + +/* SCU2C is a Misc. Control Register. */ +#define SCU2C 0x2c +/* SCU180 is the PCIe Configuration Setting Control Register. */ +#define SCU180 0x180 +/* Bit 1 controls the P2A bridge, while bit 0 controls the entire VGA device + * on the PCI bus. + */ +#define SCU180_ENP2A BIT(1) + +/* The ast2400/2500 both have six ranges. */ +#define P2A_REGION_COUNT 6 + +struct region { + u64 min; + u64 max; + u32 bit; +}; + +struct aspeed_p2a_model_data { + /* min, max, bit */ + struct region regions[P2A_REGION_COUNT]; +}; + +struct aspeed_p2a_ctrl { + struct miscdevice miscdev; + struct regmap *regmap; + + const struct aspeed_p2a_model_data *config; + + /* Access to these needs to be locked, held via probe, mapping ioctl, + * and release, remove. + */ + struct mutex tracking; + u32 readers; + u32 readerwriters[P2A_REGION_COUNT]; + + phys_addr_t mem_base; + resource_size_t mem_size; +}; + +struct aspeed_p2a_user { + struct file *file; + struct aspeed_p2a_ctrl *parent; + + /* The entire memory space is opened for reading once the bridge is + * enabled, therefore this needs only to be tracked once per user. + * If any user has it open for read, the bridge must stay enabled. + */ + u32 read; + + /* Each entry of the array corresponds to a P2A Region. If the user + * opens for read or readwrite, the reference goes up here. On + * release, this array is walked and references adjusted accordingly. + */ + u32 readwrite[P2A_REGION_COUNT]; +}; + +static void aspeed_p2a_enable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl) +{ + regmap_update_bits(p2a_ctrl->regmap, + SCU180, SCU180_ENP2A, SCU180_ENP2A); +} + +static void aspeed_p2a_disable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl) +{ + regmap_update_bits(p2a_ctrl->regmap, SCU180, SCU180_ENP2A, 0); +} + +static int aspeed_p2a_mmap(struct file *file, struct vm_area_struct *vma) +{ + unsigned long vsize; + pgprot_t prot; + struct aspeed_p2a_user *priv = file->private_data; + struct aspeed_p2a_ctrl *ctrl = priv->parent; + + if (ctrl->mem_base == 0 && ctrl->mem_size == 0) + return -EINVAL; + + vsize = vma->vm_end - vma->vm_start; + prot = vma->vm_page_prot; + + if (vma->vm_pgoff + vma_pages(vma) > ctrl->mem_size >> PAGE_SHIFT) + return -EINVAL; + + /* ast2400/2500 AHB accesses are not cache coherent */ + prot = pgprot_noncached(prot); + + if (remap_pfn_range(vma, vma->vm_start, + (ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff, + vsize, prot)) + return -EAGAIN; + + return 0; +} + +static bool aspeed_p2a_region_acquire(struct aspeed_p2a_user *priv, + struct aspeed_p2a_ctrl *ctrl, + struct aspeed_p2a_ctrl_mapping *map) +{ + int i; + u64 base, end; + bool matched = false; + + base = map->addr; + end = map->addr + (map->length - 1); + + /* If the value is a legal u32, it will find a match. */ + for (i = 0; i < P2A_REGION_COUNT; i++) { + const struct region *curr = &ctrl->config->regions[i]; + + /* If the top of this region is lower than your base, skip it. + */ + if (curr->max < base) + continue; + + /* If the bottom of this region is higher than your end, bail. + */ + if (curr->min > end) + break; + + /* Lock this and update it, therefore it someone else is + * closing their file out, this'll preserve the increment. + */ + mutex_lock(&ctrl->tracking); + ctrl->readerwriters[i] += 1; + mutex_unlock(&ctrl->tracking); + + /* Track with the user, so when they close their file, we can + * decrement properly. + */ + priv->readwrite[i] += 1; + + /* Enable the region as read-write. */ + regmap_update_bits(ctrl->regmap, SCU2C, curr->bit, 0); + matched = true; + } + + return matched; +} + +static long aspeed_p2a_ioctl(struct file *file, unsigned int cmd, + unsigned long data) +{ + struct aspeed_p2a_user *priv = file->private_data; + struct aspeed_p2a_ctrl *ctrl = priv->parent; + void __user *arg = (void __user *)data; + struct aspeed_p2a_ctrl_mapping map; + + if (copy_from_user(&map, arg, sizeof(map))) + return -EFAULT; + + switch (cmd) { + case ASPEED_P2A_CTRL_IOCTL_SET_WINDOW: + /* If they want a region to be read-only, since the entire + * region is read-only once enabled, we just need to track this + * user wants to read from the bridge, and if it's not enabled. + * Enable it. + */ + if (map.flags == ASPEED_P2A_CTRL_READ_ONLY) { + mutex_lock(&ctrl->tracking); + ctrl->readers += 1; + mutex_unlock(&ctrl->tracking); + + /* Track with the user, so when they close their file, + * we can decrement properly. + */ + priv->read += 1; + } else if (map.flags == ASPEED_P2A_CTRL_READWRITE) { + /* If we don't acquire any region return error. */ + if (!aspeed_p2a_region_acquire(priv, ctrl, &map)) { + return -EINVAL; + } + } else { + /* Invalid map flags. */ + return -EINVAL; + } + + aspeed_p2a_enable_bridge(ctrl); + return 0; + case ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG: + /* This is a request for the memory-region and corresponding + * length that is used by the driver for mmap. + */ + + map.flags = 0; + map.addr = ctrl->mem_base; + map.length = ctrl->mem_size; + + return copy_to_user(arg, &map, sizeof(map)) ? -EFAULT : 0; + } + + return -EINVAL; +} + + +/* + * When a user opens this file, we create a structure to track their mappings. + * + * A user can map a region as read-only (bridge enabled), or read-write (bit + * flipped, and bridge enabled). Either way, this tracking is used, s.t. when + * they release the device references are handled. + * + * The bridge is not enabled until a user calls an ioctl to map a region, + * simply opening the device does not enable it. + */ +static int aspeed_p2a_open(struct inode *inode, struct file *file) +{ + struct aspeed_p2a_user *priv; + + priv = kmalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->file = file; + priv->read = 0; + memset(priv->readwrite, 0, sizeof(priv->readwrite)); + + /* The file's private_data is initialized to the p2a_ctrl. */ + priv->parent = file->private_data; + + /* Set the file's private_data to the user's data. */ + file->private_data = priv; + + return 0; +} + +/* + * This will close the users mappings. It will go through what they had opened + * for readwrite, and decrement those counts. If at the end, this is the last + * user, it'll close the bridge. + */ +static int aspeed_p2a_release(struct inode *inode, struct file *file) +{ + int i; + u32 bits = 0; + bool open_regions = false; + struct aspeed_p2a_user *priv = file->private_data; + + /* Lock others from changing these values until everything is updated + * in one pass. + */ + mutex_lock(&priv->parent->tracking); + + priv->parent->readers -= priv->read; + + for (i = 0; i < P2A_REGION_COUNT; i++) { + priv->parent->readerwriters[i] -= priv->readwrite[i]; + + if (priv->parent->readerwriters[i] > 0) + open_regions = true; + else + bits |= priv->parent->config->regions[i].bit; + } + + /* Setting a bit to 1 disables the region, so let's just OR with the + * above to disable any. + */ + + /* Note, if another user is trying to ioctl, they can't grab tracking, + * and therefore can't grab either register mutex. + * If another user is trying to close, they can't grab tracking either. + */ + regmap_update_bits(priv->parent->regmap, SCU2C, bits, bits); + + /* If parent->readers is zero and open windows is 0, disable the + * bridge. + */ + if (!open_regions && priv->parent->readers == 0) + aspeed_p2a_disable_bridge(priv->parent); + + mutex_unlock(&priv->parent->tracking); + + kfree(priv); + + return 0; +} + +static const struct file_operations aspeed_p2a_ctrl_fops = { + .owner = THIS_MODULE, + .mmap = aspeed_p2a_mmap, + .unlocked_ioctl = aspeed_p2a_ioctl, + .open = aspeed_p2a_open, + .release = aspeed_p2a_release, +}; + +/* The regions are controlled by SCU2C */ +static void aspeed_p2a_disable_all(struct aspeed_p2a_ctrl *p2a_ctrl) +{ + int i; + u32 value = 0; + + for (i = 0; i < P2A_REGION_COUNT; i++) + value |= p2a_ctrl->config->regions[i].bit; + + regmap_update_bits(p2a_ctrl->regmap, SCU2C, value, value); + + /* Disable the bridge. */ + aspeed_p2a_disable_bridge(p2a_ctrl); +} + +static int aspeed_p2a_ctrl_probe(struct platform_device *pdev) +{ + struct aspeed_p2a_ctrl *misc_ctrl; + struct device *dev; + struct resource resm; + struct device_node *node; + int rc = 0; + + dev = &pdev->dev; + + misc_ctrl = devm_kzalloc(dev, sizeof(*misc_ctrl), GFP_KERNEL); + if (!misc_ctrl) + return -ENOMEM; + + mutex_init(&misc_ctrl->tracking); + + /* optional. */ + node = of_parse_phandle(dev->of_node, "memory-region", 0); + if (node) { + rc = of_address_to_resource(node, 0, &resm); + of_node_put(node); + if (rc) { + dev_err(dev, "Couldn't address to resource for reserved memory\n"); + return -ENODEV; + } + + misc_ctrl->mem_size = resource_size(&resm); + misc_ctrl->mem_base = resm.start; + } + + misc_ctrl->regmap = syscon_node_to_regmap(pdev->dev.parent->of_node); + if (IS_ERR(misc_ctrl->regmap)) { + dev_err(dev, "Couldn't get regmap\n"); + return -ENODEV; + } + + misc_ctrl->config = of_device_get_match_data(dev); + + dev_set_drvdata(&pdev->dev, misc_ctrl); + + aspeed_p2a_disable_all(misc_ctrl); + + misc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR; + misc_ctrl->miscdev.name = DEVICE_NAME; + misc_ctrl->miscdev.fops = &aspeed_p2a_ctrl_fops; + misc_ctrl->miscdev.parent = dev; + + rc = misc_register(&misc_ctrl->miscdev); + if (rc) + dev_err(dev, "Unable to register device\n"); + + return rc; +} + +static int aspeed_p2a_ctrl_remove(struct platform_device *pdev) +{ + struct aspeed_p2a_ctrl *p2a_ctrl = dev_get_drvdata(&pdev->dev); + + misc_deregister(&p2a_ctrl->miscdev); + + return 0; +} + +#define SCU2C_DRAM BIT(25) +#define SCU2C_SPI BIT(24) +#define SCU2C_SOC BIT(23) +#define SCU2C_FLASH BIT(22) + +static const struct aspeed_p2a_model_data ast2400_model_data = { + .regions = { + {0x00000000, 0x17FFFFFF, SCU2C_FLASH}, + {0x18000000, 0x1FFFFFFF, SCU2C_SOC}, + {0x20000000, 0x2FFFFFFF, SCU2C_FLASH}, + {0x30000000, 0x3FFFFFFF, SCU2C_SPI}, + {0x40000000, 0x5FFFFFFF, SCU2C_DRAM}, + {0x60000000, 0xFFFFFFFF, SCU2C_SOC}, + } +}; + +static const struct aspeed_p2a_model_data ast2500_model_data = { + .regions = { + {0x00000000, 0x0FFFFFFF, SCU2C_FLASH}, + {0x10000000, 0x1FFFFFFF, SCU2C_SOC}, + {0x20000000, 0x3FFFFFFF, SCU2C_FLASH}, + {0x40000000, 0x5FFFFFFF, SCU2C_SOC}, + {0x60000000, 0x7FFFFFFF, SCU2C_SPI}, + {0x80000000, 0xFFFFFFFF, SCU2C_DRAM}, + } +}; + +static const struct of_device_id aspeed_p2a_ctrl_match[] = { + { .compatible = "aspeed,ast2400-p2a-ctrl", + .data = &ast2400_model_data }, + { .compatible = "aspeed,ast2500-p2a-ctrl", + .data = &ast2500_model_data }, + { }, +}; + +static struct platform_driver aspeed_p2a_ctrl_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_p2a_ctrl_match, + }, + .probe = aspeed_p2a_ctrl_probe, + .remove = aspeed_p2a_ctrl_remove, +}; + +module_platform_driver(aspeed_p2a_ctrl_driver); + +MODULE_DEVICE_TABLE(of, aspeed_p2a_ctrl_match); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Patrick Venture "); +MODULE_DESCRIPTION("Control for aspeed 2400/2500 P2A VGA HOST to BMC mappings"); -- cgit v1.2.3