From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/aspeed/aspeed-uart-routing.c | 603 +++++++++++++++++++++++++++++++ 1 file changed, 603 insertions(+) create mode 100644 drivers/soc/aspeed/aspeed-uart-routing.c (limited to 'drivers/soc/aspeed/aspeed-uart-routing.c') diff --git a/drivers/soc/aspeed/aspeed-uart-routing.c b/drivers/soc/aspeed/aspeed-uart-routing.c new file mode 100644 index 000000000..ef8b24fd1 --- /dev/null +++ b/drivers/soc/aspeed/aspeed-uart-routing.c @@ -0,0 +1,603 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2018 Google LLC + * Copyright (c) 2021 Aspeed Technology Inc. + */ +#include +#include +#include +#include +#include +#include +#include + +/* register offsets */ +#define HICR9 0x98 +#define HICRA 0x9c + +/* attributes options */ +#define UART_ROUTING_IO1 "io1" +#define UART_ROUTING_IO2 "io2" +#define UART_ROUTING_IO3 "io3" +#define UART_ROUTING_IO4 "io4" +#define UART_ROUTING_IO5 "io5" +#define UART_ROUTING_IO6 "io6" +#define UART_ROUTING_IO10 "io10" +#define UART_ROUTING_UART1 "uart1" +#define UART_ROUTING_UART2 "uart2" +#define UART_ROUTING_UART3 "uart3" +#define UART_ROUTING_UART4 "uart4" +#define UART_ROUTING_UART5 "uart5" +#define UART_ROUTING_UART6 "uart6" +#define UART_ROUTING_UART10 "uart10" +#define UART_ROUTING_RES "reserved" + +struct aspeed_uart_routing { + struct regmap *map; + struct attribute_group const *attr_grp; +}; + +struct aspeed_uart_routing_selector { + struct device_attribute dev_attr; + uint8_t reg; + uint8_t mask; + uint8_t shift; + const char *const options[]; +}; + +#define to_routing_selector(_dev_attr) \ + container_of(_dev_attr, struct aspeed_uart_routing_selector, dev_attr) + +static ssize_t aspeed_uart_routing_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t aspeed_uart_routing_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +#define ROUTING_ATTR(_name) { \ + .attr = {.name = _name, \ + .mode = VERIFY_OCTAL_PERMISSIONS(0644) }, \ + .show = aspeed_uart_routing_show, \ + .store = aspeed_uart_routing_store, \ +} + +/* routing selector for AST25xx */ +static struct aspeed_uart_routing_selector ast2500_io6_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO6), + .reg = HICR9, + .shift = 8, + .mask = 0xf, + .options = { + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART5, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO5, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_uart5_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART5), + .reg = HICRA, + .shift = 28, + .mask = 0xf, + .options = { + UART_ROUTING_IO5, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_uart4_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART4), + .reg = HICRA, + .shift = 25, + .mask = 0x7, + .options = { + UART_ROUTING_IO4, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_uart3_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART3), + .reg = HICRA, + .shift = 22, + .mask = 0x7, + .options = { + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_UART4, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_uart2_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART2), + .reg = HICRA, + .shift = 19, + .mask = 0x7, + .options = { + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO1, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART1, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_uart1_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART1), + .reg = HICRA, + .shift = 16, + .mask = 0x7, + .options = { + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_io5_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO5), + .reg = HICRA, + .shift = 12, + .mask = 0x7, + .options = { + UART_ROUTING_UART5, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_IO1, + UART_ROUTING_IO3, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_io4_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO4), + .reg = HICRA, + .shift = 9, + .mask = 0x7, + .options = { + UART_ROUTING_UART4, + UART_ROUTING_UART5, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_io3_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO3), + .reg = HICRA, + .shift = 6, + .mask = 0x7, + .options = { + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART5, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_io2_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO2), + .reg = HICRA, + .shift = 3, + .mask = 0x7, + .options = { + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART5, + UART_ROUTING_UART1, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2500_io1_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO1), + .reg = HICRA, + .shift = 0, + .mask = 0x7, + .options = { + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART5, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO6, + NULL, + }, +}; + +static struct attribute *ast2500_uart_routing_attrs[] = { + &ast2500_io6_sel.dev_attr.attr, + &ast2500_uart5_sel.dev_attr.attr, + &ast2500_uart4_sel.dev_attr.attr, + &ast2500_uart3_sel.dev_attr.attr, + &ast2500_uart2_sel.dev_attr.attr, + &ast2500_uart1_sel.dev_attr.attr, + &ast2500_io5_sel.dev_attr.attr, + &ast2500_io4_sel.dev_attr.attr, + &ast2500_io3_sel.dev_attr.attr, + &ast2500_io2_sel.dev_attr.attr, + &ast2500_io1_sel.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ast2500_uart_routing_attr_group = { + .attrs = ast2500_uart_routing_attrs, +}; + +/* routing selector for AST26xx */ +static struct aspeed_uart_routing_selector ast2600_uart10_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART10), + .reg = HICR9, + .shift = 12, + .mask = 0xf, + .options = { + UART_ROUTING_IO10, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_RES, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_io10_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO10), + .reg = HICR9, + .shift = 8, + .mask = 0xf, + .options = { + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_RES, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_RES, + UART_ROUTING_UART10, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_uart4_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART4), + .reg = HICRA, + .shift = 25, + .mask = 0x7, + .options = { + UART_ROUTING_IO4, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_IO10, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_uart3_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART3), + .reg = HICRA, + .shift = 22, + .mask = 0x7, + .options = { + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_UART4, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_IO10, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_uart2_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART2), + .reg = HICRA, + .shift = 19, + .mask = 0x7, + .options = { + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO1, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART1, + UART_ROUTING_IO10, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_uart1_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART1), + .reg = HICRA, + .shift = 16, + .mask = 0x7, + .options = { + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_IO10, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_io4_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO4), + .reg = HICRA, + .shift = 9, + .mask = 0x7, + .options = { + UART_ROUTING_UART4, + UART_ROUTING_UART10, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO10, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_io3_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO3), + .reg = HICRA, + .shift = 6, + .mask = 0x7, + .options = { + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART10, + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_IO1, + UART_ROUTING_IO2, + UART_ROUTING_IO10, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_io2_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO2), + .reg = HICRA, + .shift = 3, + .mask = 0x7, + .options = { + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART10, + UART_ROUTING_UART1, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO10, + NULL, + }, +}; + +static struct aspeed_uart_routing_selector ast2600_io1_sel = { + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO1), + .reg = HICRA, + .shift = 0, + .mask = 0x7, + .options = { + UART_ROUTING_UART1, + UART_ROUTING_UART2, + UART_ROUTING_UART3, + UART_ROUTING_UART4, + UART_ROUTING_UART10, + UART_ROUTING_IO3, + UART_ROUTING_IO4, + UART_ROUTING_IO10, + NULL, + }, +}; + +static struct attribute *ast2600_uart_routing_attrs[] = { + &ast2600_uart10_sel.dev_attr.attr, + &ast2600_io10_sel.dev_attr.attr, + &ast2600_uart4_sel.dev_attr.attr, + &ast2600_uart3_sel.dev_attr.attr, + &ast2600_uart2_sel.dev_attr.attr, + &ast2600_uart1_sel.dev_attr.attr, + &ast2600_io4_sel.dev_attr.attr, + &ast2600_io3_sel.dev_attr.attr, + &ast2600_io2_sel.dev_attr.attr, + &ast2600_io1_sel.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ast2600_uart_routing_attr_group = { + .attrs = ast2600_uart_routing_attrs, +}; + +static ssize_t aspeed_uart_routing_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev); + struct aspeed_uart_routing_selector *sel = to_routing_selector(attr); + int val, pos, len; + + regmap_read(uart_routing->map, sel->reg, &val); + val = (val >> sel->shift) & sel->mask; + + len = 0; + for (pos = 0; sel->options[pos] != NULL; ++pos) { + if (pos == val) + len += sysfs_emit_at(buf, len, "[%s] ", sel->options[pos]); + else + len += sysfs_emit_at(buf, len, "%s ", sel->options[pos]); + } + + if (val >= pos) + len += sysfs_emit_at(buf, len, "[unknown(%d)]", val); + + len += sysfs_emit_at(buf, len, "\n"); + + return len; +} + +static ssize_t aspeed_uart_routing_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev); + struct aspeed_uart_routing_selector *sel = to_routing_selector(attr); + int val; + + val = match_string(sel->options, -1, buf); + if (val < 0) { + dev_err(dev, "invalid value \"%s\"\n", buf); + return -EINVAL; + } + + regmap_update_bits(uart_routing->map, sel->reg, + (sel->mask << sel->shift), + (val & sel->mask) << sel->shift); + + return count; +} + +static int aspeed_uart_routing_probe(struct platform_device *pdev) +{ + int rc; + struct device *dev = &pdev->dev; + struct aspeed_uart_routing *uart_routing; + + uart_routing = devm_kzalloc(&pdev->dev, sizeof(*uart_routing), GFP_KERNEL); + if (!uart_routing) + return -ENOMEM; + + uart_routing->map = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(uart_routing->map)) { + dev_err(dev, "cannot get regmap\n"); + return PTR_ERR(uart_routing->map); + } + + uart_routing->attr_grp = of_device_get_match_data(dev); + + rc = sysfs_create_group(&dev->kobj, uart_routing->attr_grp); + if (rc < 0) + return rc; + + dev_set_drvdata(dev, uart_routing); + + dev_info(dev, "module loaded\n"); + + return 0; +} + +static int aspeed_uart_routing_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct aspeed_uart_routing *uart_routing = platform_get_drvdata(pdev); + + sysfs_remove_group(&dev->kobj, uart_routing->attr_grp); + + return 0; +} + +static const struct of_device_id aspeed_uart_routing_table[] = { + { .compatible = "aspeed,ast2400-uart-routing", + .data = &ast2500_uart_routing_attr_group }, + { .compatible = "aspeed,ast2500-uart-routing", + .data = &ast2500_uart_routing_attr_group }, + { .compatible = "aspeed,ast2600-uart-routing", + .data = &ast2600_uart_routing_attr_group }, + { }, +}; + +static struct platform_driver aspeed_uart_routing_driver = { + .driver = { + .name = "aspeed-uart-routing", + .of_match_table = aspeed_uart_routing_table, + }, + .probe = aspeed_uart_routing_probe, + .remove = aspeed_uart_routing_remove, +}; + +module_platform_driver(aspeed_uart_routing_driver); + +MODULE_AUTHOR("Oskar Senft "); +MODULE_AUTHOR("Chia-Wei Wang "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Driver to configure Aspeed UART routing"); -- cgit v1.2.3