From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/fsl/qe/qe.c | 681 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 681 insertions(+) create mode 100644 drivers/soc/fsl/qe/qe.c (limited to 'drivers/soc/fsl/qe/qe.c') diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c new file mode 100644 index 000000000..b3c226eb5 --- /dev/null +++ b/drivers/soc/fsl/qe/qe.c @@ -0,0 +1,681 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net) + * + * Description: + * General Purpose functions for the global management of the + * QUICC Engine (QE). + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void qe_snums_init(void); +static int qe_sdma_init(void); + +static DEFINE_SPINLOCK(qe_lock); +DEFINE_SPINLOCK(cmxgcr_lock); +EXPORT_SYMBOL(cmxgcr_lock); + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +struct qe_immap __iomem *qe_immr; +EXPORT_SYMBOL(qe_immr); + +static u8 snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ +static DECLARE_BITMAP(snum_state, QE_NUM_OF_SNUM); +static unsigned int qe_num_of_snum; + +static phys_addr_t qebase = -1; + +static struct device_node *qe_get_device_node(void) +{ + struct device_node *qe; + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (qe) + return qe; + return of_find_node_by_type(NULL, "qe"); +} + +static phys_addr_t get_qe_base(void) +{ + struct device_node *qe; + int ret; + struct resource res; + + if (qebase != -1) + return qebase; + + qe = qe_get_device_node(); + if (!qe) + return qebase; + + ret = of_address_to_resource(qe, 0, &res); + if (!ret) + qebase = res.start; + of_node_put(qe); + + return qebase; +} + +void qe_reset(void) +{ + if (qe_immr == NULL) + qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); + + qe_snums_init(); + + qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + + /* Reclaim the MURAM memory for our use. */ + qe_muram_init(); + + if (qe_sdma_init()) + panic("sdma init failed!"); +} + +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) +{ + unsigned long flags; + u8 mcn_shift = 0, dev_shift = 0; + u32 val; + int ret; + + spin_lock_irqsave(&qe_lock, flags); + if (cmd == QE_RESET) { + iowrite32be((u32)(cmd | QE_CR_FLG), &qe_immr->cp.cecr); + } else { + if (cmd == QE_ASSIGN_PAGE) { + /* Here device is the SNUM, not sub-block */ + dev_shift = QE_CR_SNUM_SHIFT; + } else if (cmd == QE_ASSIGN_RISC) { + /* Here device is the SNUM, and mcnProtocol is + * e_QeCmdRiscAssignment value */ + dev_shift = QE_CR_SNUM_SHIFT; + mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT; + } else { + if (device == QE_CR_SUBBLOCK_USB) + mcn_shift = QE_CR_MCN_USB_SHIFT; + else + mcn_shift = QE_CR_MCN_NORMAL_SHIFT; + } + + iowrite32be(cmd_input, &qe_immr->cp.cecdr); + iowrite32be((cmd | QE_CR_FLG | ((u32)device << dev_shift) | (u32)mcn_protocol << mcn_shift), + &qe_immr->cp.cecr); + } + + /* wait for the QE_CR_FLG to clear */ + ret = readx_poll_timeout_atomic(ioread32be, &qe_immr->cp.cecr, val, + (val & QE_CR_FLG) == 0, 0, 100); + /* On timeout, ret is -ETIMEDOUT, otherwise it will be 0. */ + spin_unlock_irqrestore(&qe_lock, flags); + + return ret == 0; +} +EXPORT_SYMBOL(qe_issue_cmd); + +/* Set a baud rate generator. This needs lots of work. There are + * 16 BRGs, which can be connected to the QE channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The BRG clock is the QE clock divided by 2. + * It was set up long ago during the initial boot phase and is + * given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +static unsigned int brg_clk = 0; + +#define CLK_GRAN (1000) +#define CLK_GRAN_LIMIT (5) + +unsigned int qe_get_brg_clk(void) +{ + struct device_node *qe; + u32 brg; + unsigned int mod; + + if (brg_clk) + return brg_clk; + + qe = qe_get_device_node(); + if (!qe) + return brg_clk; + + if (!of_property_read_u32(qe, "brg-frequency", &brg)) + brg_clk = brg; + + of_node_put(qe); + + /* round this if near to a multiple of CLK_GRAN */ + mod = brg_clk % CLK_GRAN; + if (mod) { + if (mod < CLK_GRAN_LIMIT) + brg_clk -= mod; + else if (mod > (CLK_GRAN - CLK_GRAN_LIMIT)) + brg_clk += CLK_GRAN - mod; + } + + return brg_clk; +} +EXPORT_SYMBOL(qe_get_brg_clk); + +#define PVR_VER_836x 0x8083 +#define PVR_VER_832x 0x8084 + +static bool qe_general4_errata(void) +{ +#ifdef CONFIG_PPC32 + return pvr_version_is(PVR_VER_836x) || pvr_version_is(PVR_VER_832x); +#endif + return false; +} + +/* Program the BRG to the given sampling rate and multiplier + * + * @brg: the BRG, QE_BRG1 - QE_BRG16 + * @rate: the desired sampling rate + * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or + * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01, + * then 'multiplier' should be 8. + */ +int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) +{ + u32 divisor, tempval; + u32 div16 = 0; + + if ((brg < QE_BRG1) || (brg > QE_BRG16)) + return -EINVAL; + + divisor = qe_get_brg_clk() / (rate * multiplier); + + if (divisor > QE_BRGC_DIVISOR_MAX + 1) { + div16 = QE_BRGC_DIV16; + divisor /= 16; + } + + /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says + that the BRG divisor must be even if you're not using divide-by-16 + mode. */ + if (qe_general4_errata()) + if (!div16 && (divisor & 1) && (divisor > 3)) + divisor++; + + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | + QE_BRGC_ENABLE | div16; + + iowrite32be(tempval, &qe_immr->brg.brgc[brg - QE_BRG1]); + + return 0; +} +EXPORT_SYMBOL(qe_setbrg); + +/* Convert a string to a QE clock source enum + * + * This function takes a string, typically from a property in the device + * tree, and returns the corresponding "enum qe_clock" value. +*/ +enum qe_clock qe_clock_source(const char *source) +{ + unsigned int i; + + if (strcasecmp(source, "none") == 0) + return QE_CLK_NONE; + + if (strcmp(source, "tsync_pin") == 0) + return QE_TSYNC_PIN; + + if (strcmp(source, "rsync_pin") == 0) + return QE_RSYNC_PIN; + + if (strncasecmp(source, "brg", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 16)) + return (QE_BRG1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + if (strncasecmp(source, "clk", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 24)) + return (QE_CLK1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + return QE_CLK_DUMMY; +} +EXPORT_SYMBOL(qe_clock_source); + +/* Initialize SNUMs (thread serial numbers) according to + * QE Module Control chapter, SNUM table + */ +static void qe_snums_init(void) +{ + static const u8 snum_init_76[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D, + 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D, + 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D, + 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD, + 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD, + 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED, + 0xF4, 0xF5, 0xFC, 0xFD, + }; + static const u8 snum_init_46[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19, + 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59, + 0x68, 0x69, 0x78, 0x79, 0x80, 0x81, + }; + struct device_node *qe; + const u8 *snum_init; + int i; + + bitmap_zero(snum_state, QE_NUM_OF_SNUM); + qe_num_of_snum = 28; /* The default number of snum for threads is 28 */ + qe = qe_get_device_node(); + if (qe) { + i = of_property_read_variable_u8_array(qe, "fsl,qe-snums", + snums, 1, QE_NUM_OF_SNUM); + if (i > 0) { + of_node_put(qe); + qe_num_of_snum = i; + return; + } + /* + * Fall back to legacy binding of using the value of + * fsl,qe-num-snums to choose one of the static arrays + * above. + */ + of_property_read_u32(qe, "fsl,qe-num-snums", &qe_num_of_snum); + of_node_put(qe); + } + + if (qe_num_of_snum == 76) { + snum_init = snum_init_76; + } else if (qe_num_of_snum == 28 || qe_num_of_snum == 46) { + snum_init = snum_init_46; + } else { + pr_err("QE: unsupported value of fsl,qe-num-snums: %u\n", qe_num_of_snum); + return; + } + memcpy(snums, snum_init, qe_num_of_snum); +} + +int qe_get_snum(void) +{ + unsigned long flags; + int snum = -EBUSY; + int i; + + spin_lock_irqsave(&qe_lock, flags); + i = find_first_zero_bit(snum_state, qe_num_of_snum); + if (i < qe_num_of_snum) { + set_bit(i, snum_state); + snum = snums[i]; + } + spin_unlock_irqrestore(&qe_lock, flags); + + return snum; +} +EXPORT_SYMBOL(qe_get_snum); + +void qe_put_snum(u8 snum) +{ + const u8 *p = memchr(snums, snum, qe_num_of_snum); + + if (p) + clear_bit(p - snums, snum_state); +} +EXPORT_SYMBOL(qe_put_snum); + +static int qe_sdma_init(void) +{ + struct sdma __iomem *sdma = &qe_immr->sdma; + static s32 sdma_buf_offset = -ENOMEM; + + /* allocate 2 internal temporary buffers (512 bytes size each) for + * the SDMA */ + if (sdma_buf_offset < 0) { + sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); + if (sdma_buf_offset < 0) + return -ENOMEM; + } + + iowrite32be((u32)sdma_buf_offset & QE_SDEBCR_BA_MASK, + &sdma->sdebcr); + iowrite32be((QE_SDMR_GLB_1_MSK | (0x1 << QE_SDMR_CEN_SHIFT)), + &sdma->sdmr); + + return 0; +} + +/* The maximum number of RISCs we support */ +#define MAX_QE_RISC 4 + +/* Firmware information stored here for qe_get_firmware_info() */ +static struct qe_firmware_info qe_firmware_info; + +/* + * Set to 1 if QE firmware has been uploaded, and therefore + * qe_firmware_info contains valid data. + */ +static int qe_firmware_uploaded; + +/* + * Upload a QE microcode + * + * This function is a worker function for qe_upload_firmware(). It does + * the actual uploading of the microcode. + */ +static void qe_upload_microcode(const void *base, + const struct qe_microcode *ucode) +{ + const __be32 *code = base + be32_to_cpu(ucode->code_offset); + unsigned int i; + + if (ucode->major || ucode->minor || ucode->revision) + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s' version %u.%u.%u\n", + ucode->id, ucode->major, ucode->minor, ucode->revision); + else + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s'\n", ucode->id); + + /* Use auto-increment */ + iowrite32be(be32_to_cpu(ucode->iram_offset) | QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR, + &qe_immr->iram.iadd); + + for (i = 0; i < be32_to_cpu(ucode->count); i++) + iowrite32be(be32_to_cpu(code[i]), &qe_immr->iram.idata); + + /* Set I-RAM Ready Register */ + iowrite32be(QE_IRAM_READY, &qe_immr->iram.iready); +} + +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See Documentation/powerpc/qe_firmware.rst for information on QE microcode + * uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size; + size_t length; + const struct qe_header *hdr; + + if (!firmware) { + printk(KERN_ERR "qe-firmware: invalid pointer\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printk(KERN_ERR "qe-firmware: not a microcode\n"); + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printk(KERN_ERR "qe-firmware: unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { + printk(KERN_ERR "qe-firmware: invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size = struct_size(firmware, microcode, firmware->count); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(__be32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(__be32)) { + printk(KERN_ERR "qe-firmware: invalid length\n"); + return -EPERM; + } + + /* Validate the CRC */ + crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size)); + if (crc != crc32(0, firmware, calc_size)) { + printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) + qe_setbits_be16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR); + + if (firmware->soc.model) + printk(KERN_INFO + "qe-firmware: firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printk(KERN_INFO "qe-firmware: firmware '%s'\n", + firmware->id); + + /* + * The QE only supports one microcode per RISC, so clear out all the + * saved microcode information and put in the new. + */ + memset(&qe_firmware_info, 0, sizeof(qe_firmware_info)); + strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id)); + qe_firmware_info.extended_modes = be64_to_cpu(firmware->extended_modes); + memcpy(qe_firmware_info.vtraps, firmware->vtraps, + sizeof(firmware->vtraps)); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + iowrite32be(trap, + &qe_immr->rsp[i].tibcr[j]); + } + + /* Enable traps */ + iowrite32be(be32_to_cpu(ucode->eccr), + &qe_immr->rsp[i].eccr); + } + + qe_firmware_uploaded = 1; + + return 0; +} +EXPORT_SYMBOL(qe_upload_firmware); + +/* + * Get info on the currently-loaded firmware + * + * This function also checks the device tree to see if the boot loader has + * uploaded a firmware already. + */ +struct qe_firmware_info *qe_get_firmware_info(void) +{ + static int initialized; + struct device_node *qe; + struct device_node *fw = NULL; + const char *sprop; + + /* + * If we haven't checked yet, and a driver hasn't uploaded a firmware + * yet, then check the device tree for information. + */ + if (qe_firmware_uploaded) + return &qe_firmware_info; + + if (initialized) + return NULL; + + initialized = 1; + + qe = qe_get_device_node(); + if (!qe) + return NULL; + + /* Find the 'firmware' child node */ + fw = of_get_child_by_name(qe, "firmware"); + of_node_put(qe); + + /* Did we find the 'firmware' node? */ + if (!fw) + return NULL; + + qe_firmware_uploaded = 1; + + /* Copy the data into qe_firmware_info*/ + sprop = of_get_property(fw, "id", NULL); + if (sprop) + strlcpy(qe_firmware_info.id, sprop, + sizeof(qe_firmware_info.id)); + + of_property_read_u64(fw, "extended-modes", + &qe_firmware_info.extended_modes); + + of_property_read_u32_array(fw, "virtual-traps", qe_firmware_info.vtraps, + ARRAY_SIZE(qe_firmware_info.vtraps)); + + of_node_put(fw); + + return &qe_firmware_info; +} +EXPORT_SYMBOL(qe_get_firmware_info); + +unsigned int qe_get_num_of_risc(void) +{ + struct device_node *qe; + unsigned int num_of_risc = 0; + + qe = qe_get_device_node(); + if (!qe) + return num_of_risc; + + of_property_read_u32(qe, "fsl,qe-num-riscs", &num_of_risc); + + of_node_put(qe); + + return num_of_risc; +} +EXPORT_SYMBOL(qe_get_num_of_risc); + +unsigned int qe_get_num_of_snums(void) +{ + return qe_num_of_snum; +} +EXPORT_SYMBOL(qe_get_num_of_snums); + +static int __init qe_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) + return -ENODEV; + qe_reset(); + of_node_put(np); + return 0; +} +subsys_initcall(qe_init); + +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) +static int qe_resume(struct platform_device *ofdev) +{ + if (!qe_alive_during_sleep()) + qe_reset(); + return 0; +} + +static int qe_probe(struct platform_device *ofdev) +{ + return 0; +} + +static const struct of_device_id qe_ids[] = { + { .compatible = "fsl,qe", }, + { }, +}; + +static struct platform_driver qe_driver = { + .driver = { + .name = "fsl-qe", + .of_match_table = qe_ids, + }, + .probe = qe_probe, + .resume = qe_resume, +}; + +builtin_platform_driver(qe_driver); +#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */ -- cgit v1.2.3