From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/fsl/rcpm.c | 199 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 199 insertions(+) create mode 100644 drivers/soc/fsl/rcpm.c (limited to 'drivers/soc/fsl/rcpm.c') diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c new file mode 100644 index 000000000..3d0cae30c --- /dev/null +++ b/drivers/soc/fsl/rcpm.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// rcpm.c - Freescale QorIQ RCPM driver +// +// Copyright 2019-2020 NXP +// +// Author: Ran Wang + +#include +#include +#include +#include +#include +#include +#include +#include + +#define RCPM_WAKEUP_CELL_MAX_SIZE 7 + +struct rcpm { + unsigned int wakeup_cells; + void __iomem *ippdexpcr_base; + bool little_endian; +}; + +#define SCFG_SPARECR8 0x051c + +static void copy_ippdexpcr1_setting(u32 val) +{ + struct device_node *np; + void __iomem *regs; + u32 reg_val; + + np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-scfg"); + if (!np) + return; + + regs = of_iomap(np, 0); + if (!regs) + return; + + reg_val = ioread32be(regs + SCFG_SPARECR8); + iowrite32be(val | reg_val, regs + SCFG_SPARECR8); + + iounmap(regs); +} + +/** + * rcpm_pm_prepare - performs device-level tasks associated with power + * management, such as programming related to the wakeup source control. + * @dev: Device to handle. + * + */ +static int rcpm_pm_prepare(struct device *dev) +{ + int i, ret, idx; + void __iomem *base; + struct wakeup_source *ws; + struct rcpm *rcpm; + struct device_node *np = dev->of_node; + u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1]; + u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0}; + + rcpm = dev_get_drvdata(dev); + if (!rcpm) + return -EINVAL; + + base = rcpm->ippdexpcr_base; + idx = wakeup_sources_read_lock(); + + /* Begin with first registered wakeup source */ + for_each_wakeup_source(ws) { + + /* skip object which is not attached to device */ + if (!ws->dev || !ws->dev->parent) + continue; + + ret = device_property_read_u32_array(ws->dev->parent, + "fsl,rcpm-wakeup", value, + rcpm->wakeup_cells + 1); + + if (ret) + continue; + + /* + * For DT mode, would handle devices with "fsl,rcpm-wakeup" + * pointing to the current RCPM node. + * + * For ACPI mode, currently we assume there is only one + * RCPM controller existing. + */ + if (is_of_node(dev->fwnode)) + if (np->phandle != value[0]) + continue; + + /* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the + * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup" + * of wakeup source IP contains an integer array: . + * + * So we will go thought them to collect setting data. + */ + for (i = 0; i < rcpm->wakeup_cells; i++) + setting[i] |= value[i + 1]; + } + + wakeup_sources_read_unlock(idx); + + /* Program all IPPDEXPCRn once */ + for (i = 0; i < rcpm->wakeup_cells; i++) { + u32 tmp = setting[i]; + void __iomem *address = base + i * 4; + + if (!tmp) + continue; + + /* We can only OR related bits */ + if (rcpm->little_endian) { + tmp |= ioread32(address); + iowrite32(tmp, address); + } else { + tmp |= ioread32be(address); + iowrite32be(tmp, address); + } + /* + * Workaround of errata A-008646 on SoC LS1021A: + * There is a bug of register ippdexpcr1. + * Reading configuration register RCPM_IPPDEXPCR1 + * always return zero. So save ippdexpcr1's value + * to register SCFG_SPARECR8.And the value of + * ippdexpcr1 will be read from SCFG_SPARECR8. + */ + if (dev_of_node(dev) && (i == 1)) + if (of_device_is_compatible(np, "fsl,ls1021a-rcpm")) + copy_ippdexpcr1_setting(tmp); + } + + return 0; +} + +static const struct dev_pm_ops rcpm_pm_ops = { + .prepare = rcpm_pm_prepare, +}; + +static int rcpm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rcpm *rcpm; + int ret; + + rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL); + if (!rcpm) + return -ENOMEM; + + rcpm->ippdexpcr_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(rcpm->ippdexpcr_base)) { + ret = PTR_ERR(rcpm->ippdexpcr_base); + return ret; + } + + rcpm->little_endian = device_property_read_bool( + &pdev->dev, "little-endian"); + + ret = device_property_read_u32(&pdev->dev, + "#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells); + if (ret) + return ret; + + dev_set_drvdata(&pdev->dev, rcpm); + + return 0; +} + +static const struct of_device_id rcpm_of_match[] = { + { .compatible = "fsl,qoriq-rcpm-2.1+", }, + {} +}; +MODULE_DEVICE_TABLE(of, rcpm_of_match); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id rcpm_acpi_ids[] = { + {"NXP0015",}, + { } +}; +MODULE_DEVICE_TABLE(acpi, rcpm_acpi_ids); +#endif + +static struct platform_driver rcpm_driver = { + .driver = { + .name = "rcpm", + .of_match_table = rcpm_of_match, + .acpi_match_table = ACPI_PTR(rcpm_acpi_ids), + .pm = &rcpm_pm_ops, + }, + .probe = rcpm_probe, +}; + +module_platform_driver(rcpm_driver); -- cgit v1.2.3